CSIA EXAM, QUESTIONS WITH ACCURATE ANSWERS | MULTIPLE CHOICES
|2025\2026!! CSIA EXAM,
Study online at https://quizlet.com/_jkaqut
1. If you encounter a down drafting chimney , you should NOT :
A) open doors and windows in the home
B) ask the homeowner to turn off air conditioners and fans
C) seal the face of the opening
D) insert the vacuum hose: B) ask the homeowner to turn off air conditioners and fans (we think)
2. Utilize some type of protective sleeve around ____ rods to prevent becoming
entangled.
A) fiberglass
B) spinning
C) rattan
D) metal: B) spinning
3. Barometric damper's are used to:
A) prevent excessive draft in appliances
B) reduce flow
C) minimize the stack effect
D) eliminate wind induced downdraft: A) Prevent excessive draft in appliances
4. A catalytic combustor works to lower the ignition temperature of the escap-
ing gases to approximately:
A) 212°F
B) 500°F
C) 1100°F
D) 1700°F: B) 500°F
5. Position the base of the ladder 1 foot from the building for every ____ feet of
vertical height between the base and the roof contact point.
A) 1
B) 2
C) 3
D) 4: D) 4
6. What does readily accessible areas mean in the chimney inspection
process?
, CSIA EXAM, QUESTIONS WITH ACCURATE ANSWERS | MULTIPLE CHOICES
|2025\2026!! CSIA EXAM,
Study online at https://quizlet.com/_jkaqut
A) areas that can be reached for inspection or maintenance without the use
of tools or ladders.
B) areas that are assessable when panels are removed
C) areas that can easily be opened, removed, or destroyed for inspection
purposes
D) inspections that can easily be performed using roof access and safety
gear: A) areas that can be reached for inspection or maintenance without the use of tools or ladders
7. Buckled interior baffles on a woodstove can:
A) admit access air
B) eliminate a flow reversal
C) inhibit the flow of gases out of the stove
D) reduce emissions: C) inhibit the flow of gasses out of the stove
8. What level of inspection required every time you sweep a chimney?
A) level I
B) level II
C) level III
D) level IV: A) Level I
9. The standard for solid fuel type room heaters is:
A) UL 103
B) UL 1482
C) UL 1777
D) UL 737: B) UL 1482
10. The standard for factory built chimneys is:
A) UL 103
B) UL 127
C) UL 441
D) UL 641: A) UL 103
11. The combustion process is referred to as the:
A) fire triangle
B) fire pyramid
, CSIA EXAM, QUESTIONS WITH ACCURATE ANSWERS | MULTIPLE CHOICES
|2025\2026!! CSIA EXAM,
Study online at https://quizlet.com/_jkaqut
C) square fire theory
D) fire tetrahedron: D) fire tetrahedron
12. Which of the following is a factor leading to greater creosote accumula-
tion?
A) higher smoke density
B) better insulated chimneys
C) smaller flues
D) smaller fuel loads: A) higher smoke density
13. At a minimum how much higher does a chimney need to me than any point
within 10 feet of the chimney?
A) 12 inches
B) 24 inches
C) 36 inches
D) 48 inches: B) 24 inches
14. OSHA requires that a ladder extend ____ inches above the point of contact
with the roof.
A) 12
B) 24
C) 36
D) 48: C) 36
15. The three types of heat transfer are:
A) conduction, latent and radiation
B) radiation, convection, and sensible
C) sensible, radiant, and thermal
D) radiation, conduction, and convection: D) radiation, conduction, convection
16. During a level I inspection you would not be expected to make a note of ____
in your report.
a) broken appliance parts
B) evidence of a smoking fireplace
C) lack of a fire stop
D) inadequate floor protection: C) lack of a fire stop
|2025\2026!! CSIA EXAM,
Study online at https://quizlet.com/_jkaqut
1. If you encounter a down drafting chimney , you should NOT :
A) open doors and windows in the home
B) ask the homeowner to turn off air conditioners and fans
C) seal the face of the opening
D) insert the vacuum hose: B) ask the homeowner to turn off air conditioners and fans (we think)
2. Utilize some type of protective sleeve around ____ rods to prevent becoming
entangled.
A) fiberglass
B) spinning
C) rattan
D) metal: B) spinning
3. Barometric damper's are used to:
A) prevent excessive draft in appliances
B) reduce flow
C) minimize the stack effect
D) eliminate wind induced downdraft: A) Prevent excessive draft in appliances
4. A catalytic combustor works to lower the ignition temperature of the escap-
ing gases to approximately:
A) 212°F
B) 500°F
C) 1100°F
D) 1700°F: B) 500°F
5. Position the base of the ladder 1 foot from the building for every ____ feet of
vertical height between the base and the roof contact point.
A) 1
B) 2
C) 3
D) 4: D) 4
6. What does readily accessible areas mean in the chimney inspection
process?
, CSIA EXAM, QUESTIONS WITH ACCURATE ANSWERS | MULTIPLE CHOICES
|2025\2026!! CSIA EXAM,
Study online at https://quizlet.com/_jkaqut
A) areas that can be reached for inspection or maintenance without the use
of tools or ladders.
B) areas that are assessable when panels are removed
C) areas that can easily be opened, removed, or destroyed for inspection
purposes
D) inspections that can easily be performed using roof access and safety
gear: A) areas that can be reached for inspection or maintenance without the use of tools or ladders
7. Buckled interior baffles on a woodstove can:
A) admit access air
B) eliminate a flow reversal
C) inhibit the flow of gases out of the stove
D) reduce emissions: C) inhibit the flow of gasses out of the stove
8. What level of inspection required every time you sweep a chimney?
A) level I
B) level II
C) level III
D) level IV: A) Level I
9. The standard for solid fuel type room heaters is:
A) UL 103
B) UL 1482
C) UL 1777
D) UL 737: B) UL 1482
10. The standard for factory built chimneys is:
A) UL 103
B) UL 127
C) UL 441
D) UL 641: A) UL 103
11. The combustion process is referred to as the:
A) fire triangle
B) fire pyramid
, CSIA EXAM, QUESTIONS WITH ACCURATE ANSWERS | MULTIPLE CHOICES
|2025\2026!! CSIA EXAM,
Study online at https://quizlet.com/_jkaqut
C) square fire theory
D) fire tetrahedron: D) fire tetrahedron
12. Which of the following is a factor leading to greater creosote accumula-
tion?
A) higher smoke density
B) better insulated chimneys
C) smaller flues
D) smaller fuel loads: A) higher smoke density
13. At a minimum how much higher does a chimney need to me than any point
within 10 feet of the chimney?
A) 12 inches
B) 24 inches
C) 36 inches
D) 48 inches: B) 24 inches
14. OSHA requires that a ladder extend ____ inches above the point of contact
with the roof.
A) 12
B) 24
C) 36
D) 48: C) 36
15. The three types of heat transfer are:
A) conduction, latent and radiation
B) radiation, convection, and sensible
C) sensible, radiant, and thermal
D) radiation, conduction, and convection: D) radiation, conduction, convection
16. During a level I inspection you would not be expected to make a note of ____
in your report.
a) broken appliance parts
B) evidence of a smoking fireplace
C) lack of a fire stop
D) inadequate floor protection: C) lack of a fire stop
