DANTE LEVEL 2 LATEST EXAM ACTUAL QUESTIONS AND
ANSWERS SURE A+
✔✔When should IGMP snooping be considered for use on a Dante network? - ✔✔In
systems where some devices are intolerant of large amounts of multicast traffic.
✔✔Dante Virtual Soundcard [________] act as the clock master for the network. -
✔✔cannot
✔✔A computer running Dante Via [________] be the Clock Master for a Dante network.
- ✔✔can
✔✔A unicast Dante Flow can contain up to [________] different Tx channels of audio
from the same device. - ✔✔4
✔✔When should QoS be considered? - ✔✔When using Dante on a network with
significant amount of mixed (non-audio) traffic.
✔✔A single network that carries audio, telephone, video, and data communication
services at once is... - ✔✔A converged network.
✔✔How many channels does Dante Virtual Soundcard support? - ✔✔Up to 64x64.
✔✔How can a Dante device be configured to act as a plug-and-play replacement for
another? - ✔✔By using identical names for both devices.
✔✔Can the Secondary (redundant) port be configured to daisy chain devices? -
✔✔Yes, but only on certain Dante devices. Always check.
✔✔Devices on a Dante network [________] use different latency settings at the same
time. - ✔✔can
✔✔Can a Dante network with 5 switch hops support latency of 1ms or less? - ✔✔Yes.
Minimum recommended latency will be 0.5ms
✔✔How does Dante Controller inform you that multicast is recommended? - ✔✔With a
"Fan out' warning.
✔✔How can actual latency performance be seen? - ✔✔Using the Latency monitor in
Dante Controller.
✔✔ Choose all that apply.
ANSWERS SURE A+
✔✔When should IGMP snooping be considered for use on a Dante network? - ✔✔In
systems where some devices are intolerant of large amounts of multicast traffic.
✔✔Dante Virtual Soundcard [________] act as the clock master for the network. -
✔✔cannot
✔✔A computer running Dante Via [________] be the Clock Master for a Dante network.
- ✔✔can
✔✔A unicast Dante Flow can contain up to [________] different Tx channels of audio
from the same device. - ✔✔4
✔✔When should QoS be considered? - ✔✔When using Dante on a network with
significant amount of mixed (non-audio) traffic.
✔✔A single network that carries audio, telephone, video, and data communication
services at once is... - ✔✔A converged network.
✔✔How many channels does Dante Virtual Soundcard support? - ✔✔Up to 64x64.
✔✔How can a Dante device be configured to act as a plug-and-play replacement for
another? - ✔✔By using identical names for both devices.
✔✔Can the Secondary (redundant) port be configured to daisy chain devices? -
✔✔Yes, but only on certain Dante devices. Always check.
✔✔Devices on a Dante network [________] use different latency settings at the same
time. - ✔✔can
✔✔Can a Dante network with 5 switch hops support latency of 1ms or less? - ✔✔Yes.
Minimum recommended latency will be 0.5ms
✔✔How does Dante Controller inform you that multicast is recommended? - ✔✔With a
"Fan out' warning.
✔✔How can actual latency performance be seen? - ✔✔Using the Latency monitor in
Dante Controller.
✔✔ Choose all that apply.
