J-STD-001E EXAM QUESTIONS WITH
COMPLETE SOLUTIONS
Hardware characteristics or conditions that do not conform to the requirements of this
specification are classified as ____________ - ANSWERSHardware defects or
hardware process indicators.
The __________ always takes precedence over this standard, referenced standards
and drawings. - ANSWERScontract
When a clause in this document is referenced, - ANSWERSits subordinate clauses also
apply.
This drawing represents? - ANSWERSWire overwrap.
During an audit an employee is found using tobacco products in the work area. this
would be? - ANSWERSD1D2D3
The IPC-T- 50 document provides _________ - ANSWERSterms and definitions.
Solder alloys shall be in accordance with J-STD- ____ or equivalent. - ANSWERS006
Flux shall be in accordance with J-STD- ____ or equivalent. - ANSWERS004
Whenever there is a requirement in the text of J-STD-001 the word _____ is used. -
ANSWERSShall
Component damage that exposes the component substrate or active element or affects
structural integrity is? - ANSWERSD1D2D3
A solder connection that appears dull, matte, satin, gray, or grainy and is normal for the
material or process involved is considered? - ANSWERSAcceptable.
All IPC certification programs for MIT, CIT, and CIS require re-certification after what
period of time? - ANSWERS2 years.
A product classification where continued high performance of performance-on-demand
is critical describes a _______ product. - ANSWERSClass 3
A Class 1 Product includes product where ______ - ANSWERSthe major requirement is
function of the completed assembly.
Any violation of minimum electrical clearance as a result of conformance to defined
criteria is a ______ condition. - ANSWERSDefect
COMPLETE SOLUTIONS
Hardware characteristics or conditions that do not conform to the requirements of this
specification are classified as ____________ - ANSWERSHardware defects or
hardware process indicators.
The __________ always takes precedence over this standard, referenced standards
and drawings. - ANSWERScontract
When a clause in this document is referenced, - ANSWERSits subordinate clauses also
apply.
This drawing represents? - ANSWERSWire overwrap.
During an audit an employee is found using tobacco products in the work area. this
would be? - ANSWERSD1D2D3
The IPC-T- 50 document provides _________ - ANSWERSterms and definitions.
Solder alloys shall be in accordance with J-STD- ____ or equivalent. - ANSWERS006
Flux shall be in accordance with J-STD- ____ or equivalent. - ANSWERS004
Whenever there is a requirement in the text of J-STD-001 the word _____ is used. -
ANSWERSShall
Component damage that exposes the component substrate or active element or affects
structural integrity is? - ANSWERSD1D2D3
A solder connection that appears dull, matte, satin, gray, or grainy and is normal for the
material or process involved is considered? - ANSWERSAcceptable.
All IPC certification programs for MIT, CIT, and CIS require re-certification after what
period of time? - ANSWERS2 years.
A product classification where continued high performance of performance-on-demand
is critical describes a _______ product. - ANSWERSClass 3
A Class 1 Product includes product where ______ - ANSWERSthe major requirement is
function of the completed assembly.
Any violation of minimum electrical clearance as a result of conformance to defined
criteria is a ______ condition. - ANSWERSDefect
