2026-2027 CSA W47.1 FINAL EXAM QUESTIONS
AND ANSWERS PRACTICE QUESTIONS WITH
SOLUTIONS NEWEST | ALREADY GRADED A+
What is the max diameter of SMAW electrode that may be used for the standard
tack welders qualification test?
A) 3 mm
B) 4 mm
C) 4.5 mm
D) 6 mm - ANSWER-B
Which one of the following electrodes is a group F4 electrode?
A) EXX28
B) EXX14
C) EXX18
D) EXX11 - ANSWER-C
What is the root opening of an option 1 plate test assembly to be welding in the 2F
position with the SMAW process?
A) 6mm
B) 8mm
C) 12mm
D) 13mm - ANSWER-B
, What is the root opening of an option 1, S classification, 10mm thick plate test
assembly to be welded in the 1G position with the SMAW process?
A) 6mm
B) 8mm
C) 13mm
D) 16mm - ANSWER-C
CSA Standard W47.1 provides the requirements that must be met and adhered to
by a company seeking certification.
True or False? - ANSWER-True
Certification can be considered as an approval of the products fabricated by a
certificated company?
True or false?! - ANSWER-False
What does "class" refer to?
A) "T", "S", "FW", "ASW" or "WT" designation of welding personnel.
B) Electrode groups
C) a category of welder qualification, e.g., F, H,V or O welding position
D) Fillet and groove we'd combined test plate assemblies - ANSWER-C
What does classification refer to?
A) "T", "S", "FW", "ASW" or "WT" designation of welding personnel.
B) Electrode groups
C) a category of welder qualification, e.g., F, H,V or O welding position
AND ANSWERS PRACTICE QUESTIONS WITH
SOLUTIONS NEWEST | ALREADY GRADED A+
What is the max diameter of SMAW electrode that may be used for the standard
tack welders qualification test?
A) 3 mm
B) 4 mm
C) 4.5 mm
D) 6 mm - ANSWER-B
Which one of the following electrodes is a group F4 electrode?
A) EXX28
B) EXX14
C) EXX18
D) EXX11 - ANSWER-C
What is the root opening of an option 1 plate test assembly to be welding in the 2F
position with the SMAW process?
A) 6mm
B) 8mm
C) 12mm
D) 13mm - ANSWER-B
, What is the root opening of an option 1, S classification, 10mm thick plate test
assembly to be welded in the 1G position with the SMAW process?
A) 6mm
B) 8mm
C) 13mm
D) 16mm - ANSWER-C
CSA Standard W47.1 provides the requirements that must be met and adhered to
by a company seeking certification.
True or False? - ANSWER-True
Certification can be considered as an approval of the products fabricated by a
certificated company?
True or false?! - ANSWER-False
What does "class" refer to?
A) "T", "S", "FW", "ASW" or "WT" designation of welding personnel.
B) Electrode groups
C) a category of welder qualification, e.g., F, H,V or O welding position
D) Fillet and groove we'd combined test plate assemblies - ANSWER-C
What does classification refer to?
A) "T", "S", "FW", "ASW" or "WT" designation of welding personnel.
B) Electrode groups
C) a category of welder qualification, e.g., F, H,V or O welding position
