Wyoming Class B (General Building) Contractor
License Exam COMPLETE QUESTIONS AND
DETAILED SOLUTIONS-JUST RELEASED|2026/2027
it is better to use leveling rod than a yard stick when using
a transit because the rod is - ANSWER-longer
what is min clearance for rebar embedded in concrete -
ANSWER-2 inches
what type of mortar is medium high strength used where
high compressive strength is not important but where bond
and lateral strength are? - ANSWER-S
,what type mortar is medium-low strength used in a non
load bearing interior wall and load bearing wall in which
compression is not greater than 100 psi and exposure is
not severe? - ANSWER-O
what type of mortar is medium strength used in exposed
masonry above grade (ex. parapet walls, chimney) and
withstands severe weathering - ANSWER-N
what type mortar is high strength used for reinforced brick
masonry and plain masonry below grade (ex. foundations)
high compressive stregth - ANSWER-M
,IN AN AREA SUBJECT TO EARTHQUAKE DAMAGE,
THE STRONGEST AND MOST DURABLE MORTAR IS -
ANSWER-M
a tool that has one face that is shaped like a chisel for
trimming brick or stone is a - ANSWER-masons hammer
to break stone or block what tool would you use -
ANSWER-mason's scrutch
when drilling a hole in a brick or masonry use a -
ANSWER-carbide bit
, what do you use to clear out mortar joints before pointing -
ANSWER-cable chisel
what should you do when mortar stiffens up - ANSWER-
throw it out
if a footing and a wall are the same block cell size in steel
construction - ANSWER-make sure the connections
between the wall and the footing are secure.
a strap from a masonry wall to a wood joist illustrated
below is used - ANSWER-to hold the wall to the floor
License Exam COMPLETE QUESTIONS AND
DETAILED SOLUTIONS-JUST RELEASED|2026/2027
it is better to use leveling rod than a yard stick when using
a transit because the rod is - ANSWER-longer
what is min clearance for rebar embedded in concrete -
ANSWER-2 inches
what type of mortar is medium high strength used where
high compressive strength is not important but where bond
and lateral strength are? - ANSWER-S
,what type mortar is medium-low strength used in a non
load bearing interior wall and load bearing wall in which
compression is not greater than 100 psi and exposure is
not severe? - ANSWER-O
what type of mortar is medium strength used in exposed
masonry above grade (ex. parapet walls, chimney) and
withstands severe weathering - ANSWER-N
what type mortar is high strength used for reinforced brick
masonry and plain masonry below grade (ex. foundations)
high compressive stregth - ANSWER-M
,IN AN AREA SUBJECT TO EARTHQUAKE DAMAGE,
THE STRONGEST AND MOST DURABLE MORTAR IS -
ANSWER-M
a tool that has one face that is shaped like a chisel for
trimming brick or stone is a - ANSWER-masons hammer
to break stone or block what tool would you use -
ANSWER-mason's scrutch
when drilling a hole in a brick or masonry use a -
ANSWER-carbide bit
, what do you use to clear out mortar joints before pointing -
ANSWER-cable chisel
what should you do when mortar stiffens up - ANSWER-
throw it out
if a footing and a wall are the same block cell size in steel
construction - ANSWER-make sure the connections
between the wall and the footing are secure.
a strap from a masonry wall to a wood joist illustrated
below is used - ANSWER-to hold the wall to the floor
