CDI Elite Revision Kit: Exam Questions
That Actually Appear in Tests
What is the basic concept of QA, and what 3 factors are required to achieve the
concept of QA? - Correct Answer ✔️✔️Fundamentally the prevention of
the occurrence of defects. Special skills, knowledge, and prevention.
What is the purpose/function of a CDI? - Correct Answer ✔️✔️Inspect all
worlk and comply with the required QA inspections during all maintenance
actions performed by their production work center. They personally inspected the
work.
Who are CDIS responsible to when performing CDI functions? - Correct Answer
✔️✔️QAO
What is a receiving and screening inspection? - Correct Answer ✔️✔
️Receipt or screening inspections apply to material, components, parts,
equipment, logs, and records, Configuration Management Auto Log-sets (CM
ALS), and documents. Receipt inspections are normally conducted to identify the
,material received, determine its condition and maintenance requirements, and
verify the accuracy of accompanying records.
What is an in-process inspection, when and how is it used/required? - Correct
Answer ✔️✔️In-process inspections are required during the performance of
maintenance where satisfactory accomplishment of the task cannot be
determined after the task has been completed. Requirements for diu irrpiocess
lispection inciude, but are not limited to, witnessing application of torque,
functional testing, adjusting, assembly, servicing, and installation. The notation
"QA" appears on each Maintenance Requirement Card (MRC) containing an in-
process QA task.
What is a zónal inspection, do we do zonal inspections on the P-8A? - Correct
Answer ✔️✔️A visual examination of an interior or exterior area, installation
or assembly contained within the designated boundaries of a zone to detect
obvious damage, failure or irregularity. Yes
What is the purpose of a final inspection? - Correct Answer ✔️✔️Final
inspections are specific QA functions performed following the completion of a
maintenance task when proper accomplishment of the task can be detërmined by
visual inspection.
, What type of inspections cannot be performed by CDIS? - Correct Answer ✔️
✔️The in-process and final inspections of any task which requires the aircraft to
have an FCF. For example, if a procedure requiring an FCF that has steps A
through C, and step B drives the requirement for the ECE, a CDI may only witness
steps A and C; a QAR or CDQAR must witness and make an in-process entry for
step B and must sign the final inspection.
Where can you find a list of items requiring a QAR signoff - Correct Answer ✔
️✔️USER'S LOGISTICS SUPPORT SUMMARY (ULSS)
How do you knaw if a MAF equired a QAR signature for signoff? - Correct
Answer ✔️✔️QA required block on the MAF would be checked.
What is an FCF, how many profiles are there for FCFS and who can inspect/signoff
FCF required MAFS? - Correct Answer ✔️✔️Functional check flight. Its 4
profiles. A QAR or CDQAR can inspect/signoff the maf.
Explain proper tool control procedures from start to finish when performing
maintenance tasks, - Correct Answer ✔️✔️Check all tools being used for
the job, sign out the tools in the tool log and 00MA, have a CD inspect the tools.
When you get to the job checks all tools again before starting job, check the tools
That Actually Appear in Tests
What is the basic concept of QA, and what 3 factors are required to achieve the
concept of QA? - Correct Answer ✔️✔️Fundamentally the prevention of
the occurrence of defects. Special skills, knowledge, and prevention.
What is the purpose/function of a CDI? - Correct Answer ✔️✔️Inspect all
worlk and comply with the required QA inspections during all maintenance
actions performed by their production work center. They personally inspected the
work.
Who are CDIS responsible to when performing CDI functions? - Correct Answer
✔️✔️QAO
What is a receiving and screening inspection? - Correct Answer ✔️✔
️Receipt or screening inspections apply to material, components, parts,
equipment, logs, and records, Configuration Management Auto Log-sets (CM
ALS), and documents. Receipt inspections are normally conducted to identify the
,material received, determine its condition and maintenance requirements, and
verify the accuracy of accompanying records.
What is an in-process inspection, when and how is it used/required? - Correct
Answer ✔️✔️In-process inspections are required during the performance of
maintenance where satisfactory accomplishment of the task cannot be
determined after the task has been completed. Requirements for diu irrpiocess
lispection inciude, but are not limited to, witnessing application of torque,
functional testing, adjusting, assembly, servicing, and installation. The notation
"QA" appears on each Maintenance Requirement Card (MRC) containing an in-
process QA task.
What is a zónal inspection, do we do zonal inspections on the P-8A? - Correct
Answer ✔️✔️A visual examination of an interior or exterior area, installation
or assembly contained within the designated boundaries of a zone to detect
obvious damage, failure or irregularity. Yes
What is the purpose of a final inspection? - Correct Answer ✔️✔️Final
inspections are specific QA functions performed following the completion of a
maintenance task when proper accomplishment of the task can be detërmined by
visual inspection.
, What type of inspections cannot be performed by CDIS? - Correct Answer ✔️
✔️The in-process and final inspections of any task which requires the aircraft to
have an FCF. For example, if a procedure requiring an FCF that has steps A
through C, and step B drives the requirement for the ECE, a CDI may only witness
steps A and C; a QAR or CDQAR must witness and make an in-process entry for
step B and must sign the final inspection.
Where can you find a list of items requiring a QAR signoff - Correct Answer ✔
️✔️USER'S LOGISTICS SUPPORT SUMMARY (ULSS)
How do you knaw if a MAF equired a QAR signature for signoff? - Correct
Answer ✔️✔️QA required block on the MAF would be checked.
What is an FCF, how many profiles are there for FCFS and who can inspect/signoff
FCF required MAFS? - Correct Answer ✔️✔️Functional check flight. Its 4
profiles. A QAR or CDQAR can inspect/signoff the maf.
Explain proper tool control procedures from start to finish when performing
maintenance tasks, - Correct Answer ✔️✔️Check all tools being used for
the job, sign out the tools in the tool log and 00MA, have a CD inspect the tools.
When you get to the job checks all tools again before starting job, check the tools
