CSA W47.1 EXAM QUESTIONS WITH
100% CORRECT ANSWERS
\.CSA W47.1 - ANSWERS-The Certification of Companies for Fusion
Welding of Steel Structures
\.CSA W47.1
Scope - ANSWERS-Governs the certification of companies and the
capability of the company with respects to welding.
Does not supersede other codes or standards.
\.CSA W47.1
Jurisdiction - ANSWERS-Steel Buildings, Bridges, Cranes, Lifts, Elevators,
Bleachers, Mezzanines, Railings and Handrails.
*CAN 3-S16.1
\.CSA W47.1
Administration - ANSWERS-The Canadian Welding Bureau (CWB) has
the responsibility of administering the standard.
\.CSA W47.1
, Areas of Interest to Welders - ANSWERS-The company must submit, at
the time intervals and to the extent required by the bureau, a report
showing:
-the name of each tack welder, welder and welding operator;
-the process and welding position upon which each may be engaged;
-the expiry date of qualification; and
qualifying authority, if other than the bureau.
\.CSA W47.1
Performance Qualification Testing Requirements - ANSWERS--Welding
personnel shall be permitted to weld only in the classification, class,
thickness range and process in which they are qualified.
-A successful test results in an I.D. card according to classification,
process and mode of application.
*When a welder's ability is questioned they shall have their
qualification suspended immediately until they pass a test check to be
recertified.
\.CSA W47.1
Classification "T" - ANSWERS-Refers to a welder/operator's ability to
perform a weld from 1 side without backing and achieve complete
penetration in the root pass, hollow section, pipe and plate.
*This classification also qualifies for the S, FW, and WT classifications in
the same process, class and mode.
100% CORRECT ANSWERS
\.CSA W47.1 - ANSWERS-The Certification of Companies for Fusion
Welding of Steel Structures
\.CSA W47.1
Scope - ANSWERS-Governs the certification of companies and the
capability of the company with respects to welding.
Does not supersede other codes or standards.
\.CSA W47.1
Jurisdiction - ANSWERS-Steel Buildings, Bridges, Cranes, Lifts, Elevators,
Bleachers, Mezzanines, Railings and Handrails.
*CAN 3-S16.1
\.CSA W47.1
Administration - ANSWERS-The Canadian Welding Bureau (CWB) has
the responsibility of administering the standard.
\.CSA W47.1
, Areas of Interest to Welders - ANSWERS-The company must submit, at
the time intervals and to the extent required by the bureau, a report
showing:
-the name of each tack welder, welder and welding operator;
-the process and welding position upon which each may be engaged;
-the expiry date of qualification; and
qualifying authority, if other than the bureau.
\.CSA W47.1
Performance Qualification Testing Requirements - ANSWERS--Welding
personnel shall be permitted to weld only in the classification, class,
thickness range and process in which they are qualified.
-A successful test results in an I.D. card according to classification,
process and mode of application.
*When a welder's ability is questioned they shall have their
qualification suspended immediately until they pass a test check to be
recertified.
\.CSA W47.1
Classification "T" - ANSWERS-Refers to a welder/operator's ability to
perform a weld from 1 side without backing and achieve complete
penetration in the root pass, hollow section, pipe and plate.
*This classification also qualifies for the S, FW, and WT classifications in
the same process, class and mode.
