1 of 36
Term
Reaction Blade
Give this one a try later!
Don't know?
2 of 36
Term
,___________ design is used when larger pressure drops are required.
Give this one a try later!
Convergent-Divergent Nozzle Convergent-Divergent Nozzle
design is used when constant design is used when stable flow
pressure is required. rates are required.
Convergent-Divergent Nozzle Convergent-Divergent Nozzle
design is used when ______ are design is used when minimal
required. pressure drops are required.
Don't know?
3 of 36
Term
the pressure at the nozzle _______ (the narrowest part of the nozzle at
the outlet of the convergent section should be at ________ pressure.
Give this one a try later!
the ________ at the nozzle throat
the velocity at the nozzle throat (the
(the narrowest part of the
narrowest part of the nozzle at the
nozzle at the outlet of the
outlet of the convergent section
convergent section should be
should be at minimum pressure.
at critical _______
, the temperature at the nozzle throat the density at the nozzle throat (the
(the narrowest part of the nozzle at narrowest part of the nozzle at the
the outlet of the convergent section outlet of the convergent section
should be at maximum pressure. should be at average pressure.
Don't know?
4 of 36
Term
The velocity increases across the entire _______.
Give this one a try later!
The ______ increases across the The pressure increases across the
entire nozzle. entire nozzle.
The temperature decreases across The density remains constant across
the entire nozzle. the entire nozzle.
Don't know?
5 of 36
Term
Single flow turbine - flows in one direction only in relation to the
turbine shaft. between the inlet and exhaust
Give this one a try later!
Term
Reaction Blade
Give this one a try later!
Don't know?
2 of 36
Term
,___________ design is used when larger pressure drops are required.
Give this one a try later!
Convergent-Divergent Nozzle Convergent-Divergent Nozzle
design is used when constant design is used when stable flow
pressure is required. rates are required.
Convergent-Divergent Nozzle Convergent-Divergent Nozzle
design is used when ______ are design is used when minimal
required. pressure drops are required.
Don't know?
3 of 36
Term
the pressure at the nozzle _______ (the narrowest part of the nozzle at
the outlet of the convergent section should be at ________ pressure.
Give this one a try later!
the ________ at the nozzle throat
the velocity at the nozzle throat (the
(the narrowest part of the
narrowest part of the nozzle at the
nozzle at the outlet of the
outlet of the convergent section
convergent section should be
should be at minimum pressure.
at critical _______
, the temperature at the nozzle throat the density at the nozzle throat (the
(the narrowest part of the nozzle at narrowest part of the nozzle at the
the outlet of the convergent section outlet of the convergent section
should be at maximum pressure. should be at average pressure.
Don't know?
4 of 36
Term
The velocity increases across the entire _______.
Give this one a try later!
The ______ increases across the The pressure increases across the
entire nozzle. entire nozzle.
The temperature decreases across The density remains constant across
the entire nozzle. the entire nozzle.
Don't know?
5 of 36
Term
Single flow turbine - flows in one direction only in relation to the
turbine shaft. between the inlet and exhaust
Give this one a try later!
