EVITP PRACTICE EXAM 2026 UPDATE QUESTIONS
AND CORRECT VERIFIED ANSWERS ALREADY
GRADED A+ (BRAND NEW VISION)
EVSE output cable is permitted to be made from Type? Cable and is generally permitted
to have a maximum length of?.
• EVJT / 25'
• MI / 25'
• SJO / 20'
• SO / 20' - ans-• EVJT / 25
• An electric hybrid vehicle that does not require external charging is a
• BEV
• HEV
• PHEV
• PZEV - ans-• HEV
Which of the following is true about the proximity connection point on the
J1772 connector?
• It communicates to the EVSE that the vehicle plug is properly connected.
• It is a pilot signal that communicates the state of the EVSE.
• It serves as a chassis grounding point
• None of the above - ans-• It communicates to the EVSE that the vehicle plug is
properly connected
• The purpose of the 1772 connector pins is to provide ?.
, • A charging interface that is safe for the consumers use
• A means to signal the EVSE to stop charging based on pin contact
• A signal that the connector is properly seated on the vehicle
• All of the above - ans-• All of the above
• The proper hand-off of documentation should include electrical details, contrast
documents, operation and maintenance manuels, as well as?.
• Applications and approvals for incentive programs
• Inspection reports
• Rebate and tax forms
• All of the above - ans-• All the above
• Which of the following are key components of conducting a thorough site visit?
• Electrical supply points must be located
• Information may be gathered for load calculation
• It gives an opportunity to obtain as-built drawings
• All of the above - ans-• All of the above
• Charging is defined as which of the following?
• Refilling brake fluid in an EV
• Removing the batteries from an EV and placing them inside the charging equipment
• Replacing batteries in an EV
• Supplying power (KW) to an Ev battery - ans-• Supplying power (KW) to an Ev battery
Which of the following acronyms represents the level of charge present in an EV
battery?
• ANSI
• EVA
• NFPA
AND CORRECT VERIFIED ANSWERS ALREADY
GRADED A+ (BRAND NEW VISION)
EVSE output cable is permitted to be made from Type? Cable and is generally permitted
to have a maximum length of?.
• EVJT / 25'
• MI / 25'
• SJO / 20'
• SO / 20' - ans-• EVJT / 25
• An electric hybrid vehicle that does not require external charging is a
• BEV
• HEV
• PHEV
• PZEV - ans-• HEV
Which of the following is true about the proximity connection point on the
J1772 connector?
• It communicates to the EVSE that the vehicle plug is properly connected.
• It is a pilot signal that communicates the state of the EVSE.
• It serves as a chassis grounding point
• None of the above - ans-• It communicates to the EVSE that the vehicle plug is
properly connected
• The purpose of the 1772 connector pins is to provide ?.
, • A charging interface that is safe for the consumers use
• A means to signal the EVSE to stop charging based on pin contact
• A signal that the connector is properly seated on the vehicle
• All of the above - ans-• All of the above
• The proper hand-off of documentation should include electrical details, contrast
documents, operation and maintenance manuels, as well as?.
• Applications and approvals for incentive programs
• Inspection reports
• Rebate and tax forms
• All of the above - ans-• All the above
• Which of the following are key components of conducting a thorough site visit?
• Electrical supply points must be located
• Information may be gathered for load calculation
• It gives an opportunity to obtain as-built drawings
• All of the above - ans-• All of the above
• Charging is defined as which of the following?
• Refilling brake fluid in an EV
• Removing the batteries from an EV and placing them inside the charging equipment
• Replacing batteries in an EV
• Supplying power (KW) to an Ev battery - ans-• Supplying power (KW) to an Ev battery
Which of the following acronyms represents the level of charge present in an EV
battery?
• ANSI
• EVA
• NFPA
