KANSAS TURF PEST CONTROL CATEGORY 3B EXAM
2026/2027 | ACTUAL COMPLETE ALL REAL EXAM
QUESTIONS AND CORRECT ANSWERS (VERIFIED
ANSWERS )| ALREADY GRADED A+ | JUST
RELEASED!!
To be effective, pesticides should be applied -
ANSWER~uniformly at the recommended rate.
Calibration - ANSWER~is the process of determining the
spray volume that will be applied to a given area under
specific conditions.
,The conditions associated with power sprayers -
ANSWER~are speed (engine and ground), nozzle type
and size, pressure uniformity, and equipment
maintenance.
Formulations used in calibration jar method -
ANSWER~flow rate gpm= 15/s gpm = gallons per minute
delivered by nozzle
s = number of seconds required to fill a 1-quart jar.
formulations to determine the speed of sprayer in miles
per hour - ANSWER~mph=120/t
mph = speed in miles per hour
t = number of seconds required
,to travel 176 feet.
Application rate formula -
ANSWER~mph=gpmx5,940/mph x w
gpa = application rate in gallons per acre (treated area)
gpm = gallons per minute delivered by nozzle
mph = speed of tractor in miles per hour
w = width.
For broadcast spraying W is nozzle spacing in -
ANSWER~inches
For band spraying W is band width in - ANSWER~inches
, Application methods vary with: - ANSWER~The type of
pesticide, host plant, target pest
Low pressure, low volume sprayers or granular applicators
can be used against: - ANSWER~soil or aboveground
foliage pests of ornamentals
•
diseases or insects on turfgrass
•
weeds
Natural enemies play an important part in keeping insects
and mites under control. These natural enemies include: -
ANSWER~wasps and lady beetles
2026/2027 | ACTUAL COMPLETE ALL REAL EXAM
QUESTIONS AND CORRECT ANSWERS (VERIFIED
ANSWERS )| ALREADY GRADED A+ | JUST
RELEASED!!
To be effective, pesticides should be applied -
ANSWER~uniformly at the recommended rate.
Calibration - ANSWER~is the process of determining the
spray volume that will be applied to a given area under
specific conditions.
,The conditions associated with power sprayers -
ANSWER~are speed (engine and ground), nozzle type
and size, pressure uniformity, and equipment
maintenance.
Formulations used in calibration jar method -
ANSWER~flow rate gpm= 15/s gpm = gallons per minute
delivered by nozzle
s = number of seconds required to fill a 1-quart jar.
formulations to determine the speed of sprayer in miles
per hour - ANSWER~mph=120/t
mph = speed in miles per hour
t = number of seconds required
,to travel 176 feet.
Application rate formula -
ANSWER~mph=gpmx5,940/mph x w
gpa = application rate in gallons per acre (treated area)
gpm = gallons per minute delivered by nozzle
mph = speed of tractor in miles per hour
w = width.
For broadcast spraying W is nozzle spacing in -
ANSWER~inches
For band spraying W is band width in - ANSWER~inches
, Application methods vary with: - ANSWER~The type of
pesticide, host plant, target pest
Low pressure, low volume sprayers or granular applicators
can be used against: - ANSWER~soil or aboveground
foliage pests of ornamentals
•
diseases or insects on turfgrass
•
weeds
Natural enemies play an important part in keeping insects
and mites under control. These natural enemies include: -
ANSWER~wasps and lady beetles
