ForkliFt operator CertiFiCation exam (latest osHa / ansi
standards) praCtiCe test 2026|||questions and answers witH
rationales/graded a+/2026 update/100% CorreCt /instant
download
Section 1: General Safety Principles Questions 1 to 15
**Question 1**
Before operating a forklift, the operator must:
A) Check fuel level only
B) Perform a pre-operational inspection ✓
C) Adjust the seat
D) Honk the horn
**Correct Answer: B ✓**
Rationale: Daily pre-operational inspections identify defects that could cause
accidents. OSHA 1910.178(q)(7) requires that forklifts be examined before being placed
into service. Adjusting the seat (C) and checking fuel (A) are parts of the inspection but
not the full requirement. Honking the horn (D) is not a pre-operation requirement.
---
**Question 2**
A forklift is considered "unsafe" if:
A) The horn works
, B) The brakes are worn beyond limits ✓
C) Lights are functional
D) Tires are properly inflated
**Correct Answer: B ✓**
Rationale: Worn brakes beyond manufacturer limits reduce stopping ability and create
a serious hazard. OSHA requires that brakes be capable of stopping the vehicle under
all conditions of operation. Functional horn (A), lights (C), and proper tire inflation (D)
are safety requirements, not defects that make the forklift unsafe.
---
**Question 3**
When parking a forklift on an incline, the operator must:
A) Park facing downhill with forks lowered and engaged brake
B) Park facing uphill with forks raised
C) Set the parking brake, lower forks to the floor, and chock the wheels ✓
D) Leave the engine running
**Correct Answer: C ✓**
Rationale: OSHA and ANSI require that when parking on an incline, the parking brake
must be set, forks must be lowered to the floor, and wheels must be chocked to prevent
unintended movement. Option A is incomplete (no chocks). Option B is unsafe (forks
raised). Option D is unsafe and wastes fuel.
---
**Question 4**
The maximum load capacity of a forklift is listed on the:
standards) praCtiCe test 2026|||questions and answers witH
rationales/graded a+/2026 update/100% CorreCt /instant
download
Section 1: General Safety Principles Questions 1 to 15
**Question 1**
Before operating a forklift, the operator must:
A) Check fuel level only
B) Perform a pre-operational inspection ✓
C) Adjust the seat
D) Honk the horn
**Correct Answer: B ✓**
Rationale: Daily pre-operational inspections identify defects that could cause
accidents. OSHA 1910.178(q)(7) requires that forklifts be examined before being placed
into service. Adjusting the seat (C) and checking fuel (A) are parts of the inspection but
not the full requirement. Honking the horn (D) is not a pre-operation requirement.
---
**Question 2**
A forklift is considered "unsafe" if:
A) The horn works
, B) The brakes are worn beyond limits ✓
C) Lights are functional
D) Tires are properly inflated
**Correct Answer: B ✓**
Rationale: Worn brakes beyond manufacturer limits reduce stopping ability and create
a serious hazard. OSHA requires that brakes be capable of stopping the vehicle under
all conditions of operation. Functional horn (A), lights (C), and proper tire inflation (D)
are safety requirements, not defects that make the forklift unsafe.
---
**Question 3**
When parking a forklift on an incline, the operator must:
A) Park facing downhill with forks lowered and engaged brake
B) Park facing uphill with forks raised
C) Set the parking brake, lower forks to the floor, and chock the wheels ✓
D) Leave the engine running
**Correct Answer: C ✓**
Rationale: OSHA and ANSI require that when parking on an incline, the parking brake
must be set, forks must be lowered to the floor, and wheels must be chocked to prevent
unintended movement. Option A is incomplete (no chocks). Option B is unsafe (forks
raised). Option D is unsafe and wastes fuel.
---
**Question 4**
The maximum load capacity of a forklift is listed on the:
