CSA STANDARD W47.1-09 EXAM ACTUAL EXAM 2026 |
CWB WELDING SUPERVISOR STUDY GUIDE WXE1.1 |
ALL QUESTIONS AND CORRECT ANSWERS | VERIFIED
ANSWERS | JUST RELEASED
Does the CSA Standard W47.1 specify the requirements for a company
seeking certification? ---------CORRECT ANSWER-----------------Yes, This
standard provides the requirements for the certification of companies
engaged in the fusion welding of steel and the qualification of their
personnel and welding procedures (Cl 1.1)
Who is responsible for the welded products a company produces? -------
--CORRECT ANSWER-----------------The company (1.2) The requirements
of this standard are based on the principle that a certified company has
full responsibility for the quality of the welded product it produces and
this responsibility cannot be transferred to its employed or retained
personnel or to the administrator of this standard.
Does this standard approve the products and services of a certified
company? ---------CORRECT ANSWER-----------------(Cl. 1.3) This standard
governs the certification of companies. Certification pertains to the
capability of the company with respect to welding. Certification should
not be construed as approving any products or services of the certified
company.
,What requirements are stipulated in CSA Standard W47.1 ---------
CORRECT ANSWER-----------------(Cl. 1.4) This standard stipulates
requirements for:
- welding engineers
- welding supervisors
- tack welders, welders and welding operators
- documentation
What standard or code reference publications are referred to in CSA
Standard W47.1? ---------CORRECT ANSWER-----------------(Cl. 2.1, 2.2)
This standard refers to the following publications, and where such
reference is made, it shall be to the edition listed below, including all
amendments published there to:
CSA (Canadian Standards Association)
CAN/CSA-G30.18-M92(R2007) - Billet-steel bars for concrete
reinforcement
G40.20/G40.21-04(R2009) - General requirements for rolled or welded
structural quality steel/ Structural quality steel
W48-06 - Filler metals and allied materials for metal arc welding
, W59-03(R2008) - Welded steel construction (metal arc welding)
CAN/CSA-W117.2-06 - Safety in welding, cutting, and allied processes
W178.1-08 - Certification of welding inspection organizations
ASTM International (American Society for Testing and Materials)
A 370-08a - Standard Test Methods and Definitions for Mechanical
Testing of Steel Products
E 10-07a - Standard Test Method for Brinell Hardness of Metallic
Materials.
E23-07ae1 - Standard Test Methods for Notched Bar Impact Testing of
Metallic Materials
AWS (American Welding Society)
A3.0-01
Standard Definitions; Including Terms for Adhesive Bonding, Brazing,
Soldering, Thermal Cutting, and Thermal Spraying
A5.12/A5.12M-98 (R2007) - Specification for Tungsten and Tungsten-
Alloy Electrodes for Arc Welding and Cutting
A.518/A518M-05 - Specification for Carbon Steel Electrodes and Rods
for Gas Shielded Arc Welding
A5.23/A5.23M-07 - Specification for Low-Alloy Steel Electrodes and
Fluxes for Submerged Arc Welding
A5.28/A5.28M-05 - Specification for Low-Alloy Steel Electrodes and
Rods for Gas Shielded Arc Welding
CWB WELDING SUPERVISOR STUDY GUIDE WXE1.1 |
ALL QUESTIONS AND CORRECT ANSWERS | VERIFIED
ANSWERS | JUST RELEASED
Does the CSA Standard W47.1 specify the requirements for a company
seeking certification? ---------CORRECT ANSWER-----------------Yes, This
standard provides the requirements for the certification of companies
engaged in the fusion welding of steel and the qualification of their
personnel and welding procedures (Cl 1.1)
Who is responsible for the welded products a company produces? -------
--CORRECT ANSWER-----------------The company (1.2) The requirements
of this standard are based on the principle that a certified company has
full responsibility for the quality of the welded product it produces and
this responsibility cannot be transferred to its employed or retained
personnel or to the administrator of this standard.
Does this standard approve the products and services of a certified
company? ---------CORRECT ANSWER-----------------(Cl. 1.3) This standard
governs the certification of companies. Certification pertains to the
capability of the company with respect to welding. Certification should
not be construed as approving any products or services of the certified
company.
,What requirements are stipulated in CSA Standard W47.1 ---------
CORRECT ANSWER-----------------(Cl. 1.4) This standard stipulates
requirements for:
- welding engineers
- welding supervisors
- tack welders, welders and welding operators
- documentation
What standard or code reference publications are referred to in CSA
Standard W47.1? ---------CORRECT ANSWER-----------------(Cl. 2.1, 2.2)
This standard refers to the following publications, and where such
reference is made, it shall be to the edition listed below, including all
amendments published there to:
CSA (Canadian Standards Association)
CAN/CSA-G30.18-M92(R2007) - Billet-steel bars for concrete
reinforcement
G40.20/G40.21-04(R2009) - General requirements for rolled or welded
structural quality steel/ Structural quality steel
W48-06 - Filler metals and allied materials for metal arc welding
, W59-03(R2008) - Welded steel construction (metal arc welding)
CAN/CSA-W117.2-06 - Safety in welding, cutting, and allied processes
W178.1-08 - Certification of welding inspection organizations
ASTM International (American Society for Testing and Materials)
A 370-08a - Standard Test Methods and Definitions for Mechanical
Testing of Steel Products
E 10-07a - Standard Test Method for Brinell Hardness of Metallic
Materials.
E23-07ae1 - Standard Test Methods for Notched Bar Impact Testing of
Metallic Materials
AWS (American Welding Society)
A3.0-01
Standard Definitions; Including Terms for Adhesive Bonding, Brazing,
Soldering, Thermal Cutting, and Thermal Spraying
A5.12/A5.12M-98 (R2007) - Specification for Tungsten and Tungsten-
Alloy Electrodes for Arc Welding and Cutting
A.518/A518M-05 - Specification for Carbon Steel Electrodes and Rods
for Gas Shielded Arc Welding
A5.23/A5.23M-07 - Specification for Low-Alloy Steel Electrodes and
Fluxes for Submerged Arc Welding
A5.28/A5.28M-05 - Specification for Low-Alloy Steel Electrodes and
Rods for Gas Shielded Arc Welding
