SACA Certification C-101 Test
Questions And Correct Answers
Function
The three Fs of product design are form, fit and __________.
Lean Manufacturing
High product quality, quick delivery, low costs are the primary goals of what system?
Standardize
Which 5S step involves formatting 5S work instructions so that they look and read alike?
Reduces the waste of excess motion, helps improve morale, and enables other lean
methods to be more successful
How does the 5S method aid in the goal of lean manufacturing?
HMI
What is the interface used with CNC machines to load and monitor programs?
,PLC
The automation of many different manufacturing processes is done through the use of a
small computer called a __________.
An error message.
When a machine stops due to an problem, what would the machine's HMI typically
display?
Industry 4.0
Smart sensors connected to manufacturing networks creates what level of Industry?
Ethernet
What standard introduced in the early 1980s established a method to physically connect
machines from different manufacturers enabling them to communicate to one another?
Predictive maintenance
Which IIoT application monitors equipment during normal operation to prevent failures
to the equipment?
, Standards
Occupational Safety and Health Administration(OSHA) develops __________ for safety
retail and service industries to construction and manufacturing.
True
The regulation that requires manufacturers to document and report information on the
types of chemicals they use, store, release into the environment, or dispose of is known
as EPCRA. Is this statement TRUE or FALSE?
Computers
The use of ___________________marked the advent of the third industrial revolution?
Notify a supervisor immediately
If an operator knows a safety problem exists with a machine, the operator should
__________.
Emergency stop
A(n) __________ is a device or system that shuts down a machine immediately if the
operator is in danger.
Questions And Correct Answers
Function
The three Fs of product design are form, fit and __________.
Lean Manufacturing
High product quality, quick delivery, low costs are the primary goals of what system?
Standardize
Which 5S step involves formatting 5S work instructions so that they look and read alike?
Reduces the waste of excess motion, helps improve morale, and enables other lean
methods to be more successful
How does the 5S method aid in the goal of lean manufacturing?
HMI
What is the interface used with CNC machines to load and monitor programs?
,PLC
The automation of many different manufacturing processes is done through the use of a
small computer called a __________.
An error message.
When a machine stops due to an problem, what would the machine's HMI typically
display?
Industry 4.0
Smart sensors connected to manufacturing networks creates what level of Industry?
Ethernet
What standard introduced in the early 1980s established a method to physically connect
machines from different manufacturers enabling them to communicate to one another?
Predictive maintenance
Which IIoT application monitors equipment during normal operation to prevent failures
to the equipment?
, Standards
Occupational Safety and Health Administration(OSHA) develops __________ for safety
retail and service industries to construction and manufacturing.
True
The regulation that requires manufacturers to document and report information on the
types of chemicals they use, store, release into the environment, or dispose of is known
as EPCRA. Is this statement TRUE or FALSE?
Computers
The use of ___________________marked the advent of the third industrial revolution?
Notify a supervisor immediately
If an operator knows a safety problem exists with a machine, the operator should
__________.
Emergency stop
A(n) __________ is a device or system that shuts down a machine immediately if the
operator is in danger.
