1|Page
NEIEP 600 Final Exam || Most Recent Exam Actual
Complete Real Verified Exam Questions And Correct
Answers (Expertly Verified Answers) Already Graded
A+ | Guaranteed Success!! Newest Exam!!!
What is the time constant for a circuit with 150k ohms and
2 microfarad capacitor? - Answer-.3 seconds
If frequency is increased in a capacitave circuit what will
happen? - Answer-Capacitive reactance will decrease
What happens in a circuit, when the capacitor voltage
equals the source voltage? - Answer-Current flow stops in
the circuit
In a DC circuit, which is correct about capacitors the
instant when power is applied? - Answer-Current is
maximum
In the circuit shown in figure 1, what will be the total
capacitance? - Answer-250 u(micro) farads
,2|Page
If a circuit has a capacitor of 5 microfrauds and a source
voltage of 120 volts DC through a resistance of 200k, how
long will it take to fully charge? - Answer-5 seconds
What happens in a circuit, when the capacitor voltage
equals the source voltage? - Answer-Current flow stops in
the circuit
which statement best describes one time constant of a
capacitor? - Answer-The time it takes to charge to 63.2%
of applied voltage
In a DC circuit, which is correct about capacitors the
instant when power is applied? - Answer-Current is
maximum
If a circuit has a capacitor of 5 microfrauds and a source
voltage of 120 volts DC through a resistance of 200k, how
long will it take to fully charge? - Answer-5 seconds
If two capacitors in parrallel have equal reactance of 40
ohms what is the total reactance? - Answer-20ohms
, 3|Page
Which of the following would increase the DC working
voltage DCWV of a capacitor - Answer-Increase the plate
area and the dielectric thickness
Which statement is correct concerning capacitors? -
Answer-Increased plate area, increases capacitance
Which of the following is the unit used for measuring
capacitance? - Answer-Farad
Current flow from positive to negative is described as -
Answer-conventional flow
Current flow from negative to positive is called - Answer-
electron flow
By increases the distance between the plates we
________ the charge capacity - Answer-decrease
In AC circuits, DCWV should be _________ times the
RMS operating voltage of the circuit. - Answer-2 1/2
NEIEP 600 Final Exam || Most Recent Exam Actual
Complete Real Verified Exam Questions And Correct
Answers (Expertly Verified Answers) Already Graded
A+ | Guaranteed Success!! Newest Exam!!!
What is the time constant for a circuit with 150k ohms and
2 microfarad capacitor? - Answer-.3 seconds
If frequency is increased in a capacitave circuit what will
happen? - Answer-Capacitive reactance will decrease
What happens in a circuit, when the capacitor voltage
equals the source voltage? - Answer-Current flow stops in
the circuit
In a DC circuit, which is correct about capacitors the
instant when power is applied? - Answer-Current is
maximum
In the circuit shown in figure 1, what will be the total
capacitance? - Answer-250 u(micro) farads
,2|Page
If a circuit has a capacitor of 5 microfrauds and a source
voltage of 120 volts DC through a resistance of 200k, how
long will it take to fully charge? - Answer-5 seconds
What happens in a circuit, when the capacitor voltage
equals the source voltage? - Answer-Current flow stops in
the circuit
which statement best describes one time constant of a
capacitor? - Answer-The time it takes to charge to 63.2%
of applied voltage
In a DC circuit, which is correct about capacitors the
instant when power is applied? - Answer-Current is
maximum
If a circuit has a capacitor of 5 microfrauds and a source
voltage of 120 volts DC through a resistance of 200k, how
long will it take to fully charge? - Answer-5 seconds
If two capacitors in parrallel have equal reactance of 40
ohms what is the total reactance? - Answer-20ohms
, 3|Page
Which of the following would increase the DC working
voltage DCWV of a capacitor - Answer-Increase the plate
area and the dielectric thickness
Which statement is correct concerning capacitors? -
Answer-Increased plate area, increases capacitance
Which of the following is the unit used for measuring
capacitance? - Answer-Farad
Current flow from positive to negative is described as -
Answer-conventional flow
Current flow from negative to positive is called - Answer-
electron flow
By increases the distance between the plates we
________ the charge capacity - Answer-decrease
In AC circuits, DCWV should be _________ times the
RMS operating voltage of the circuit. - Answer-2 1/2
