1|Page
MP100 FINAL EXAM 2026/2027 ||VERIFIED EXAM!!!||
MOST RECENT EXAM ACTUAL COMPLETE REAL
EXAM QUESTIONS AND CORRECT ANSWERS
(VERIFIED ANSWERS) ALREADY GRADED A+ |
GUARANTEED SUCCESS!! NEWEST EXAM!!!
How does the root mean square (RMS) value measure
amplitude - Answer-it measures the average of peak
amplitude.
The warmer the temperature, the ___________________
a sound pressure wave will travel through the air. -
Answer-faster
T/F: The velocity of a sound pressure wave increases at a
rate of 1.1 feet per second for each Fahrenheit degree
increase in temperature - Answer-True
T/F: Reflections can cause phase shift. - Answer-true
______________ can be due to different distances
between two or more microphones. - Answer-phase shift
,2|Page
Group Signal on the I/O can be in the___________Path? -
Answer-Can be in either path or both
How well we hear certain frequencies compared to other
frequencies is affected by our listening level (amplitude).
What frequencies are affected most? - Answer-low
frequencies
What is the average range of human hearing? - Answer-
20hz-20kHz
What decibel scale do faders use? - Answer-logarthimic
The preferred way of getting signal to the MTR is the
_________ because it is a shorter, cleaner signal. -
Answer-Direct Out
What console inputs are line level inputs? - Answer-line
level inputs, and tape or monitor inputs
What is the fader function that sends to the multitrack
recorder? - Answer-Source Fader
,3|Page
The _____________ is a fader which receives signal from
its same-numbered multitrack buss.
Feedback
The correct answer is: Source fader - Answer-group fader
T/F: Input mode arms the track allowing the MTR to record
signal. - Answer-false
T/F: On an in-line console, the monitor section (monitor
path) was often inferior in quality. - Answer-false
What style of console has an upgraded monitor section? -
Answer-in-line
T/F: Recording consoles are single path? - Answer-false;
they usually have two
A control room is designed and built to be acoustically
isolated for____? - Answer-critical listening
What do we call the process where all of the individual
tracks from a multitrack recording are combined through
, 4|Page
the console and adjustments are made to the level, tone,
and spatial positioning of the sources? - Answer-Mixing
What is the name of the recorder that is designed to
record the stereo mix? - Answer-MDR
What is the name of the MDR in studios C and B -
Answer-Alesis Masterlink
What is the term for a device that will change one form of
energy to another corresponding form of energy? -
Answer-transducer
What are the three MAIN steps to the multi-track recording
process? - Answer-recording, overdubbing, then mixing
a balanced interconnect has ____ signal carrying
conductors - Answer-2; positive and negative
For a balanced interconnect the positive signal is in or out
of phase? - Answer-in-phase
MP100 FINAL EXAM 2026/2027 ||VERIFIED EXAM!!!||
MOST RECENT EXAM ACTUAL COMPLETE REAL
EXAM QUESTIONS AND CORRECT ANSWERS
(VERIFIED ANSWERS) ALREADY GRADED A+ |
GUARANTEED SUCCESS!! NEWEST EXAM!!!
How does the root mean square (RMS) value measure
amplitude - Answer-it measures the average of peak
amplitude.
The warmer the temperature, the ___________________
a sound pressure wave will travel through the air. -
Answer-faster
T/F: The velocity of a sound pressure wave increases at a
rate of 1.1 feet per second for each Fahrenheit degree
increase in temperature - Answer-True
T/F: Reflections can cause phase shift. - Answer-true
______________ can be due to different distances
between two or more microphones. - Answer-phase shift
,2|Page
Group Signal on the I/O can be in the___________Path? -
Answer-Can be in either path or both
How well we hear certain frequencies compared to other
frequencies is affected by our listening level (amplitude).
What frequencies are affected most? - Answer-low
frequencies
What is the average range of human hearing? - Answer-
20hz-20kHz
What decibel scale do faders use? - Answer-logarthimic
The preferred way of getting signal to the MTR is the
_________ because it is a shorter, cleaner signal. -
Answer-Direct Out
What console inputs are line level inputs? - Answer-line
level inputs, and tape or monitor inputs
What is the fader function that sends to the multitrack
recorder? - Answer-Source Fader
,3|Page
The _____________ is a fader which receives signal from
its same-numbered multitrack buss.
Feedback
The correct answer is: Source fader - Answer-group fader
T/F: Input mode arms the track allowing the MTR to record
signal. - Answer-false
T/F: On an in-line console, the monitor section (monitor
path) was often inferior in quality. - Answer-false
What style of console has an upgraded monitor section? -
Answer-in-line
T/F: Recording consoles are single path? - Answer-false;
they usually have two
A control room is designed and built to be acoustically
isolated for____? - Answer-critical listening
What do we call the process where all of the individual
tracks from a multitrack recording are combined through
, 4|Page
the console and adjustments are made to the level, tone,
and spatial positioning of the sources? - Answer-Mixing
What is the name of the recorder that is designed to
record the stereo mix? - Answer-MDR
What is the name of the MDR in studios C and B -
Answer-Alesis Masterlink
What is the term for a device that will change one form of
energy to another corresponding form of energy? -
Answer-transducer
What are the three MAIN steps to the multi-track recording
process? - Answer-recording, overdubbing, then mixing
a balanced interconnect has ____ signal carrying
conductors - Answer-2; positive and negative
For a balanced interconnect the positive signal is in or out
of phase? - Answer-in-phase
