Med gas test 11
Category 3 gas-power device supply systems, vacuum systems and scavenging
systems. The initial tests shall be performed before the final tests shall be conducted by
______. – answer Installer, representative of the system manufacturer, medical gas
system verifier 6030
Category 2 piped gas and vacuum systems only __________ shall be permitted -
answerModerate sedation
Category 3 vacuum source equipment shall be obtained from, and be installed under
the supervision of the __________? - answerManufacturer, supplier, or who is familiar
with its insulation, operation, use
Cylinders and service in a storage shall be __________ secured and located to prevent
falling or being knocked over - answerindividually
Dental air sources for a compressor intake located inside the building shall be located
within a space where no __________ are stored or used - answerChemical based
materials, patient medical treatment, discharge from category 3 vacuum system
Dental applications that use flexible connectors shall have a gauge pressure rating not
less than __________. - answer1000 psig
In a dental vacuum system, the dental vacuum tubing shall be permitted to be polyvinyl
chloride (PVC) plastic with a minimum wall thickness of __________. - answerSchedule
40
In a dental, connecting a manifold to the gas distribution piping the flexible connectors
shall not exceed __________ in length - answer5 ft
In a single treatment facility, the central supply systems shall contain a minimum of
__________ equal headers, of one or more cylinders with each header containing a
minimum of an average days supply. - answer2
Mains, branches and drops to individual service outlets in dental pressure oxygen piping
systems shall not be less than __________. - answer3/8" NPS
Piping for dental positive pressure medical gases shall be cleaned for oxygen service,
delivered plug or capped and shall be hard-drawn, seamless copper ASTM
__________. - answerB819
Category 3 gas-power device supply systems, vacuum systems and scavenging
systems. The initial tests shall be performed before the final tests shall be conducted by
______. – answer Installer, representative of the system manufacturer, medical gas
system verifier 6030
Category 2 piped gas and vacuum systems only __________ shall be permitted -
answerModerate sedation
Category 3 vacuum source equipment shall be obtained from, and be installed under
the supervision of the __________? - answerManufacturer, supplier, or who is familiar
with its insulation, operation, use
Cylinders and service in a storage shall be __________ secured and located to prevent
falling or being knocked over - answerindividually
Dental air sources for a compressor intake located inside the building shall be located
within a space where no __________ are stored or used - answerChemical based
materials, patient medical treatment, discharge from category 3 vacuum system
Dental applications that use flexible connectors shall have a gauge pressure rating not
less than __________. - answer1000 psig
In a dental vacuum system, the dental vacuum tubing shall be permitted to be polyvinyl
chloride (PVC) plastic with a minimum wall thickness of __________. - answerSchedule
40
In a dental, connecting a manifold to the gas distribution piping the flexible connectors
shall not exceed __________ in length - answer5 ft
In a single treatment facility, the central supply systems shall contain a minimum of
__________ equal headers, of one or more cylinders with each header containing a
minimum of an average days supply. - answer2
Mains, branches and drops to individual service outlets in dental pressure oxygen piping
systems shall not be less than __________. - answer3/8" NPS
Piping for dental positive pressure medical gases shall be cleaned for oxygen service,
delivered plug or capped and shall be hard-drawn, seamless copper ASTM
__________. - answerB819
