MP100 FINAL EXAM 2026 || MOST RECENT
EXAM 2026-2027 ACTUAL COMPLETE REAL EXAM
QUESTIONS AND CORRECT ANSWERS (VERIFIED
ANSWERS) ALREADY GRADED A+ | GUARANTEED
SUCCESS!! NEWEST EXAM | JUST RELEASED!!
What is multi-voice oscillation? - ANSWER-Physical
movement of multiple
voices against each
other
What percent of the original signal will the first repeat in a
delay effect be? -
ANSWER-
100%
When there is a difference in ____, there is a difference in _____,
when there is
a difference in ______, there is a difference in _______. -
ANSWER-Time,
Phase, Phase,
Tone
Chorus, reverb, phaser, and delay are what? - ANSWER-TBP
,Which of these definitions most closely describes reverb? -
ANSWER-Random
Multiple
echos
The slate button routes the console's talkback microphone to
the following: -
ANSWER-MTB, SB, MTR, and
MDR
The talkback activation button functions as a
_____________ switch. -
ANSWER-
momentary
To play the control room/monitor mix over the studio loud
speakers you must
press which button? - ANSWER-Control
Room to studio
How many solo switches are there on the Neotek I/O module? -
ANSWER-3
A compressor is what type of processor? - ANSWER-dynamic
Does compression happen above or below the threshold ? -
ANSWER-above
, Is ratio a constant or variable ? - ANSWER-constant
Should a compressor be patched across the aux send or
insert? - ANSWER-
insert
What happens with a 1:1 ratio? - ANSWER-nothing; bypass
On a high/low pass filter, frequencies attenuated less than
3dB are in the
___________. - ANSWER-
passband
On a high/low pass filter, frequencies attenuated more
than 3dB are in the
___________. - ANSWER-
stopband
On a high/low pass the filter, the frequency at which the signal
is attenuated by
exactly 3dB is ______________. -
ANSWER-cut-off
The Q factor of a peaking EQ refers to the ______________. -
ANSWER-width
of the bell
shape
What is a high-pass and low-pass filter used in
conjunction? - ANSWER-a
EXAM 2026-2027 ACTUAL COMPLETE REAL EXAM
QUESTIONS AND CORRECT ANSWERS (VERIFIED
ANSWERS) ALREADY GRADED A+ | GUARANTEED
SUCCESS!! NEWEST EXAM | JUST RELEASED!!
What is multi-voice oscillation? - ANSWER-Physical
movement of multiple
voices against each
other
What percent of the original signal will the first repeat in a
delay effect be? -
ANSWER-
100%
When there is a difference in ____, there is a difference in _____,
when there is
a difference in ______, there is a difference in _______. -
ANSWER-Time,
Phase, Phase,
Tone
Chorus, reverb, phaser, and delay are what? - ANSWER-TBP
,Which of these definitions most closely describes reverb? -
ANSWER-Random
Multiple
echos
The slate button routes the console's talkback microphone to
the following: -
ANSWER-MTB, SB, MTR, and
MDR
The talkback activation button functions as a
_____________ switch. -
ANSWER-
momentary
To play the control room/monitor mix over the studio loud
speakers you must
press which button? - ANSWER-Control
Room to studio
How many solo switches are there on the Neotek I/O module? -
ANSWER-3
A compressor is what type of processor? - ANSWER-dynamic
Does compression happen above or below the threshold ? -
ANSWER-above
, Is ratio a constant or variable ? - ANSWER-constant
Should a compressor be patched across the aux send or
insert? - ANSWER-
insert
What happens with a 1:1 ratio? - ANSWER-nothing; bypass
On a high/low pass filter, frequencies attenuated less than
3dB are in the
___________. - ANSWER-
passband
On a high/low pass filter, frequencies attenuated more
than 3dB are in the
___________. - ANSWER-
stopband
On a high/low pass the filter, the frequency at which the signal
is attenuated by
exactly 3dB is ______________. -
ANSWER-cut-off
The Q factor of a peaking EQ refers to the ______________. -
ANSWER-width
of the bell
shape
What is a high-pass and low-pass filter used in
conjunction? - ANSWER-a
