Floor Systems (Review Questions With Correct
Solutions)
Save Groups
Terms in this set (29)
It is important for carpenters to use a. construction drawings
specifications with _____.
a. construction drawings
b. product data sheets
c. framing squares
d. plywood panels
Which of the following is shown on c. grade beams
foundation plans?
a. plumbing layout
b. electrical plans
c. grade beams
d. room layout
Which of the following is a key c. Studs extend from the sill plate to the rafter plate
characteristic of balloon framing?
a. Large, exposed beams
b. Spacious open areas
c. Studs extend from the sill plate to
the rafter plate
d. Studs spliced together
Which framing method uses the a. Post-and-Beam framing
largest and sturdiest framing
members?
a. Post-and-Beam framing
b. Platform framing
c. Balloon framing
d. Beam framing
, Metal troughs embedded into a c. trench ducts
concrete floor and used as feeder
ducts for electrical power and
telecommunication lines are referred
to as ____.
a. shoring
b. long pans
c. trench ducts
d. dome pans
The lowest members of a structure's a. sill plates
frame are ____.
a. sill plates
b. beams
c. floor joists
d. blocking
Steel columns that may be filled and d. lally columns
reinforced with concrete are called
____.
a. I-beams
b. stem walls
c. piers
d. lally columns
In platform frame construction, the b. rim joists
ends of all the joists are fastened to
the ___.
a. studs
b. rim joists
c. beam
d. trimmer joists
Subfloors consist of panels laid c. floor joists
directly on and fastened to _____.
a. bridging
b. girders
c. floor joists
d. sill plates
Solutions)
Save Groups
Terms in this set (29)
It is important for carpenters to use a. construction drawings
specifications with _____.
a. construction drawings
b. product data sheets
c. framing squares
d. plywood panels
Which of the following is shown on c. grade beams
foundation plans?
a. plumbing layout
b. electrical plans
c. grade beams
d. room layout
Which of the following is a key c. Studs extend from the sill plate to the rafter plate
characteristic of balloon framing?
a. Large, exposed beams
b. Spacious open areas
c. Studs extend from the sill plate to
the rafter plate
d. Studs spliced together
Which framing method uses the a. Post-and-Beam framing
largest and sturdiest framing
members?
a. Post-and-Beam framing
b. Platform framing
c. Balloon framing
d. Beam framing
, Metal troughs embedded into a c. trench ducts
concrete floor and used as feeder
ducts for electrical power and
telecommunication lines are referred
to as ____.
a. shoring
b. long pans
c. trench ducts
d. dome pans
The lowest members of a structure's a. sill plates
frame are ____.
a. sill plates
b. beams
c. floor joists
d. blocking
Steel columns that may be filled and d. lally columns
reinforced with concrete are called
____.
a. I-beams
b. stem walls
c. piers
d. lally columns
In platform frame construction, the b. rim joists
ends of all the joists are fastened to
the ___.
a. studs
b. rim joists
c. beam
d. trimmer joists
Subfloors consist of panels laid c. floor joists
directly on and fastened to _____.
a. bridging
b. girders
c. floor joists
d. sill plates
