NETA III QUESTIONS WITH COMPLETE
SOLUTIONS 2023 VERIFIED TEST BANK
2026 UPDATED QUESTIONS WITH
ANSWERS GRADED A+
⩥ A new 69kV-35kV power transformer filled with FR3 is being placed
into service, what is the minimum acceptable dielectric breakdown
voltage for a transformer of this voltage class when tested in accordance
with ASTM D1816 (2mm gap)? kV. Answer: 50
⩥ The _____ winding is made of many turns of small wire and is located
at the top of the stator core.. Answer: Start
⩥ Excitation-current tests of large dry-type transformer windings are
required for maintenance testing but not acceptance testing.
True or false. Answer: True
⩥ The Boolean expression for a 3-input AND gate is ______.. Answer:
Q=ABC
⩥ What would be the appropriate acceptance test voltage for a withstand
test on a new 8.25kV, 1200A rated metal-enclosed interrupter switchgear
per NETA standards? kVAC/kVDC. Answer: 14/20
, ⩥ For providing short circuit protection, a fuse rated in continuous
amperes shall not exceed _____ times the ampacity of the conductor..
Answer: 3
⩥ n a DC circuit, fully charged capacitors act as. Answer: Open circuits
⩥ What is the maximum acceptable value for Total Decomposition
Products in a SF6 circuit breaker that has been in service for 3
years?_____ppm. Answer: 50
⩥ True or false Contactor coils are present in manual motor starters:.
Answer: False
⩥ When testing new HV oil circuit breakers per NETA standards, which
inspection is optional?. Answer: Trip/close coil current signature
analysis
⩥ In a circuit containing resistance and inductance, the time required for
current to reach its full value involves which of the following?. Answer:
T=L/R
⩥ In a typical stepped distance protection scheme, Zone 2 is set to
protect _____ of the transmission line with a time delay of 0.25-0.4
seconds. Answer: 120%
SOLUTIONS 2023 VERIFIED TEST BANK
2026 UPDATED QUESTIONS WITH
ANSWERS GRADED A+
⩥ A new 69kV-35kV power transformer filled with FR3 is being placed
into service, what is the minimum acceptable dielectric breakdown
voltage for a transformer of this voltage class when tested in accordance
with ASTM D1816 (2mm gap)? kV. Answer: 50
⩥ The _____ winding is made of many turns of small wire and is located
at the top of the stator core.. Answer: Start
⩥ Excitation-current tests of large dry-type transformer windings are
required for maintenance testing but not acceptance testing.
True or false. Answer: True
⩥ The Boolean expression for a 3-input AND gate is ______.. Answer:
Q=ABC
⩥ What would be the appropriate acceptance test voltage for a withstand
test on a new 8.25kV, 1200A rated metal-enclosed interrupter switchgear
per NETA standards? kVAC/kVDC. Answer: 14/20
, ⩥ For providing short circuit protection, a fuse rated in continuous
amperes shall not exceed _____ times the ampacity of the conductor..
Answer: 3
⩥ n a DC circuit, fully charged capacitors act as. Answer: Open circuits
⩥ What is the maximum acceptable value for Total Decomposition
Products in a SF6 circuit breaker that has been in service for 3
years?_____ppm. Answer: 50
⩥ True or false Contactor coils are present in manual motor starters:.
Answer: False
⩥ When testing new HV oil circuit breakers per NETA standards, which
inspection is optional?. Answer: Trip/close coil current signature
analysis
⩥ In a circuit containing resistance and inductance, the time required for
current to reach its full value involves which of the following?. Answer:
T=L/R
⩥ In a typical stepped distance protection scheme, Zone 2 is set to
protect _____ of the transmission line with a time delay of 0.25-0.4
seconds. Answer: 120%
