SDI Firearm Finishes and Engraving (FTT 201)
Exam | Actual Questions with
Verified Answers Grade A+ Guarantee
Save
Practice questions for this set
Learn 1 /7 Study with Learn
TRUE
Choose an answer
T/F: One possible indicator that a Which of the following wheel types
1 barrel is likely to shoot poorly is 2 used in machine polishing will cut
pitting near the crown. the fastest?
T/F:Areas of the firearm that have
Joe Carlos' experiment showed that
3 had hydrographics applied do not 4
electropolishing was:
need to be oiled and will not rust.
Don't know?
Terms in this set (113)
, T/F: One possible indicator that a TRUE
barrel is likely to shoot poorly is
pitting near the crown.
Lands in the throat are which are Cleaning Rod Damage
uneven in their short points are
usually caused by:
According to Joe Carlos, what must Shoot It
you do with a barrel to know for
certain what its current capabilities
are?
T/F: The electropolishing process FALSE
both improves barrel accuracy and
is safe for the environment.
Joe Carlos' experiment showed that Effective for Increasing the Accuracy of
electropolishing was: Damaged Barrels
The fire lapping process involves: Firing cartridges with progressively finer grit
abrasive coated bullets, which effectively
polishes the bore.
T/F: Fire lapping has about the TRUE
same average effective
improvement on accuracy as
electropolishing.
There is generally more need for Button Rifled Bores
fire lapping in:
Exam | Actual Questions with
Verified Answers Grade A+ Guarantee
Save
Practice questions for this set
Learn 1 /7 Study with Learn
TRUE
Choose an answer
T/F: One possible indicator that a Which of the following wheel types
1 barrel is likely to shoot poorly is 2 used in machine polishing will cut
pitting near the crown. the fastest?
T/F:Areas of the firearm that have
Joe Carlos' experiment showed that
3 had hydrographics applied do not 4
electropolishing was:
need to be oiled and will not rust.
Don't know?
Terms in this set (113)
, T/F: One possible indicator that a TRUE
barrel is likely to shoot poorly is
pitting near the crown.
Lands in the throat are which are Cleaning Rod Damage
uneven in their short points are
usually caused by:
According to Joe Carlos, what must Shoot It
you do with a barrel to know for
certain what its current capabilities
are?
T/F: The electropolishing process FALSE
both improves barrel accuracy and
is safe for the environment.
Joe Carlos' experiment showed that Effective for Increasing the Accuracy of
electropolishing was: Damaged Barrels
The fire lapping process involves: Firing cartridges with progressively finer grit
abrasive coated bullets, which effectively
polishes the bore.
T/F: Fire lapping has about the TRUE
same average effective
improvement on accuracy as
electropolishing.
There is generally more need for Button Rifled Bores
fire lapping in:
