CSIA TEST EXAM QUESTIONS WITH COMPLETE
SOLUTIONS GUARANTEED PASS 2025/2026
Rectangular flues with aspect ratios greater than 2 to 1 shall be sized at
least ______ of the fireplace opening -ANSWER->1:8
single wall connector clearance for an unlisted gas appliance
with a draft hood is -ANSWER->
a level ______ inspection is done with ladders and common hand tools
-ANSWER->2
Draft is the force or pressure difference between the inside and the
outside of the venting system -ANSWER->true
NFPA 211 recommends chimney flues should be inspected
ANSWER->Annually
,Two major factors that affect draft are -ANSWER->temperature
differential and chimney height
what are factors of combustion efficiency -ANSWER->time turbulence
and temperature
rabies is not carried by -ANSWER->Birds what species
carries histoplasmosis -ANSWER->Birds
what animal is known for roundworm -ANSWER->raccoons
what is NOT a step of a sweep -ANSWER->turn all gas
appliances off
What is the proper class fire extinguisher for flammable liquids grease
and oil -ANSWER->Class B
T or F - the area of a fireplace chimney flue cannot be greater than
twice the area of the wood stove appliance outlet on an exterior
chimney -ANSWER->True
, a 24 gauge sheet metal panel with 1 inch airspace will reduce clearance to
combustibles by ____ when used as a wall protector -ANSWER->66%
???
According to NFPA 211 solid fuel burning appliances can be install in a
garage -ANSWER->
Fuel air and heat are required components of what
ANSWER>combustion
The maximum width for a type 1 industrial grade ladder rating is
ANSWER->250 pounds
where the trim of a mantel extends up to an 1 1/2 inch clearance to
combustibles from the firebox opening should be at least -ANSWER->6
inches
there must be _______ inches of masonry between a wall thimble an
combustible material -ANSWER->12
SOLUTIONS GUARANTEED PASS 2025/2026
Rectangular flues with aspect ratios greater than 2 to 1 shall be sized at
least ______ of the fireplace opening -ANSWER->1:8
single wall connector clearance for an unlisted gas appliance
with a draft hood is -ANSWER->
a level ______ inspection is done with ladders and common hand tools
-ANSWER->2
Draft is the force or pressure difference between the inside and the
outside of the venting system -ANSWER->true
NFPA 211 recommends chimney flues should be inspected
ANSWER->Annually
,Two major factors that affect draft are -ANSWER->temperature
differential and chimney height
what are factors of combustion efficiency -ANSWER->time turbulence
and temperature
rabies is not carried by -ANSWER->Birds what species
carries histoplasmosis -ANSWER->Birds
what animal is known for roundworm -ANSWER->raccoons
what is NOT a step of a sweep -ANSWER->turn all gas
appliances off
What is the proper class fire extinguisher for flammable liquids grease
and oil -ANSWER->Class B
T or F - the area of a fireplace chimney flue cannot be greater than
twice the area of the wood stove appliance outlet on an exterior
chimney -ANSWER->True
, a 24 gauge sheet metal panel with 1 inch airspace will reduce clearance to
combustibles by ____ when used as a wall protector -ANSWER->66%
???
According to NFPA 211 solid fuel burning appliances can be install in a
garage -ANSWER->
Fuel air and heat are required components of what
ANSWER>combustion
The maximum width for a type 1 industrial grade ladder rating is
ANSWER->250 pounds
where the trim of a mantel extends up to an 1 1/2 inch clearance to
combustibles from the firebox opening should be at least -ANSWER->6
inches
there must be _______ inches of masonry between a wall thimble an
combustible material -ANSWER->12
