Inspect & Test Fire Alarm NICET 2
Exam Questions & Answers (Grade
A+)
Light sources used for testing sensitivity on radiant energy
detectors must meet which of the following requirements? -
correct answer ✅1) Measured Energy Output
2) Defined distance for testing.
Air sampling detectors are required to be tested? -
correct answer ✅Annually
A 25% increase in port pressure is acceptable? -
correct answer ✅False. An increase of that amount indicates a
major change or problem.
In air sampling detection systems a decrease in smoke transport
times would be acceptable? -
correct answer ✅False. Test valves should be closed to the valves
measured during commissioning.
Air Sampling detectors are required to be inspected? -
correct answer ✅Semiannually
,Inspect & Test Fire Alarm NICET 2
Exam Questions & Answers (Grade
A+)
Radiant Energy Detectors must be tested -
correct answer ✅Semiannually
Two Way emergency Communication systems must be tested? -
correct answer ✅Annually
True or False? You must scan the disk storage for bad sectors as a
requirement for testing of the control unit for a Mass Notification
System? -
correct answer ✅FALSE
True or False? You must Power down the unit and restart it when
testing the control unit for a Mass Notification System? -
correct answer ✅TRUE
True or False? You must delete unneeded log and error files as par
of the required testing for the control unit of Mass Notification
Systems? -
correct answer ✅TRUE
, Inspect & Test Fire Alarm NICET 2
Exam Questions & Answers (Grade
A+)
True or False? When testing the control unit of a Mass Notification
System; verify any remote control software loaded into the system
is disabled to prevent unauthorized access. -
correct answer ✅TRUE
Which is NOT a form of Emergency Communication System;
1) Fire fighters Phone
2) Mass notification System
3) One way communication system
4) Audible Zone Alert -
correct answer ✅Audible Zone Alert
Radiant Energy Detectors must be inspected? -
correct answer ✅Quarterly
When testing a Mass Notification system, during the test of the
main power supply, you must first ________________ the
secondary power supply and test under maximum load. -
correct answer ✅disconnect
Exam Questions & Answers (Grade
A+)
Light sources used for testing sensitivity on radiant energy
detectors must meet which of the following requirements? -
correct answer ✅1) Measured Energy Output
2) Defined distance for testing.
Air sampling detectors are required to be tested? -
correct answer ✅Annually
A 25% increase in port pressure is acceptable? -
correct answer ✅False. An increase of that amount indicates a
major change or problem.
In air sampling detection systems a decrease in smoke transport
times would be acceptable? -
correct answer ✅False. Test valves should be closed to the valves
measured during commissioning.
Air Sampling detectors are required to be inspected? -
correct answer ✅Semiannually
,Inspect & Test Fire Alarm NICET 2
Exam Questions & Answers (Grade
A+)
Radiant Energy Detectors must be tested -
correct answer ✅Semiannually
Two Way emergency Communication systems must be tested? -
correct answer ✅Annually
True or False? You must scan the disk storage for bad sectors as a
requirement for testing of the control unit for a Mass Notification
System? -
correct answer ✅FALSE
True or False? You must Power down the unit and restart it when
testing the control unit for a Mass Notification System? -
correct answer ✅TRUE
True or False? You must delete unneeded log and error files as par
of the required testing for the control unit of Mass Notification
Systems? -
correct answer ✅TRUE
, Inspect & Test Fire Alarm NICET 2
Exam Questions & Answers (Grade
A+)
True or False? When testing the control unit of a Mass Notification
System; verify any remote control software loaded into the system
is disabled to prevent unauthorized access. -
correct answer ✅TRUE
Which is NOT a form of Emergency Communication System;
1) Fire fighters Phone
2) Mass notification System
3) One way communication system
4) Audible Zone Alert -
correct answer ✅Audible Zone Alert
Radiant Energy Detectors must be inspected? -
correct answer ✅Quarterly
When testing a Mass Notification system, during the test of the
main power supply, you must first ________________ the
secondary power supply and test under maximum load. -
correct answer ✅disconnect
