NICET FAS Level 1 Exam Questions &
Answers (Grade A+)
The operable part of a manually actuated alarm indicating device
shall be not less than ________inches AFF? -
correct answer ✅42
Consider the use of grounding electrodes. Rod and pipe electrodes
shall not be less than _______ feet in length? -
correct answer ✅8
Smoke detectors should not be located in a direct airflow or closer
than________ inches from an air supply diffuser or return air
opening? -
correct answer ✅36
Consider the use of visible notification appliances. Wall mounted
appliances shall be mounted such that the entire lens is not less
than________ inches AFF? -
correct answer ✅80
How many 16 gauge conductors are permitted in a 4X1 1/2" square
box? -
correct answer ✅12
,NICET FAS Level 1 Exam Questions &
Answers (Grade A+)
Wall-mounted audible appliances shall have their tops above the
finished floors at heights of not less than_______ inches and below
the finished ceilings at distances of not less than 6" -
correct answer ✅90
An ________dB ambient sound level with a 6 hour exposure time
requires hearing protection. -
correct answer ✅92dbA
Spot-type heat-sensing fire detectors shall be located on the ceiling
not less than _______inches from the sidewall. -
correct answer ✅4
While operating an aerial lift, what is required? -
correct answer ✅lanyard
Spot-type smoke detectors shall be located on the ceiling or, if on a
sidewall no more than_______ inches down from the ceiling to the
top of the detector. -
correct answer ✅12
, NICET FAS Level 1 Exam Questions &
Answers (Grade A+)
The distance between spot type heat detectors shall not exceed
their listed spacing, and there shall be detectors with a distance of
________ the listed spacing, measured at right angles from all
walls? -
correct answer ✅1/2
Where partitions extend to within ________percent of the ceiling
height, the spaces separated by the partitions shall be considered
as separate rooms? -
correct answer ✅15
Consider 1,000 feet total of 18 gauge solid coated copper at 167deg
Fahrenheit. The resistance of this conductor is_________ ohms? -
correct answer ✅8.08
Consider the installation of heat detectors on a ceiling with beams.
A ceiling shall be treated as a smooth ceiling if the beams project
no more than_______ inches below the ceiling? -
correct answer ✅4
What conductor types are acceptable to substitute for FPLR? -
correct answer ✅CMP,FPLP,CMR
Answers (Grade A+)
The operable part of a manually actuated alarm indicating device
shall be not less than ________inches AFF? -
correct answer ✅42
Consider the use of grounding electrodes. Rod and pipe electrodes
shall not be less than _______ feet in length? -
correct answer ✅8
Smoke detectors should not be located in a direct airflow or closer
than________ inches from an air supply diffuser or return air
opening? -
correct answer ✅36
Consider the use of visible notification appliances. Wall mounted
appliances shall be mounted such that the entire lens is not less
than________ inches AFF? -
correct answer ✅80
How many 16 gauge conductors are permitted in a 4X1 1/2" square
box? -
correct answer ✅12
,NICET FAS Level 1 Exam Questions &
Answers (Grade A+)
Wall-mounted audible appliances shall have their tops above the
finished floors at heights of not less than_______ inches and below
the finished ceilings at distances of not less than 6" -
correct answer ✅90
An ________dB ambient sound level with a 6 hour exposure time
requires hearing protection. -
correct answer ✅92dbA
Spot-type heat-sensing fire detectors shall be located on the ceiling
not less than _______inches from the sidewall. -
correct answer ✅4
While operating an aerial lift, what is required? -
correct answer ✅lanyard
Spot-type smoke detectors shall be located on the ceiling or, if on a
sidewall no more than_______ inches down from the ceiling to the
top of the detector. -
correct answer ✅12
, NICET FAS Level 1 Exam Questions &
Answers (Grade A+)
The distance between spot type heat detectors shall not exceed
their listed spacing, and there shall be detectors with a distance of
________ the listed spacing, measured at right angles from all
walls? -
correct answer ✅1/2
Where partitions extend to within ________percent of the ceiling
height, the spaces separated by the partitions shall be considered
as separate rooms? -
correct answer ✅15
Consider 1,000 feet total of 18 gauge solid coated copper at 167deg
Fahrenheit. The resistance of this conductor is_________ ohms? -
correct answer ✅8.08
Consider the installation of heat detectors on a ceiling with beams.
A ceiling shall be treated as a smooth ceiling if the beams project
no more than_______ inches below the ceiling? -
correct answer ✅4
What conductor types are acceptable to substitute for FPLR? -
correct answer ✅CMP,FPLP,CMR
