PA State Auto Inspection Final Exam Questions
Comprehensive Resource To Help You Ace 2026-2027
Exams Includes Frequently Tested Questions With
ELABORATED 100%
Correct COMPLETE SOLUTIONS
Guaranteed Pass First Attempt!! Current Update
1. What's the minimum steering wheel size? - Correct Answer: 13 inches
2. The horn should be heard at least ________feet away. - Correct Answer:
200 feet
3. What do we look for when checking the brake pedal? - Correct Answer:
Can't go down more than 80% of total travel.
Can't fade when vehicle is stopped. (bleed by in master cylinder)
No excessive friction in linkage.
Can't be missing the rubber pedal pad.
4. What's the min. brake specs for Bonded?_______Riveted?_________ -
Correct Answer: Bonded 2/32 Riveted 1/32
5. What do we check brake hoses for? - Correct Answer: Make sure they
aren't disconnected, don't leak, flattened or
Restricted, dry rot (cord showing)
,6. List the items for interior inspection. - Correct Answer: Steering wheel free
play
Steering gear box
Steering column
Proper size steering wheel
Proper turning
Flexible steering coupler
Indicator lamps for high beam, turn signals.
Horn- must be stock type
Brake pedal travel
Brake pedal fade
Brake pedal linkage
Brake pedal pad
Seats- DRIVERS seat and back must be firmly attached
No springs sticking out of DRIVER'S seat
Seat adjustment must work
Seat belts in good condition ( if originally equipped)
Rear view mirror- no cracks or discoloration
Rear view mirror- must hold adjustment. No junk hanging on it.
7. Describe steering "Lock to Lock" - Correct Answer: Turning the front
wheels as far as they go from one side to the
other. "Stop to Stop"
, 8. Describe the "1/4 inch Play Test" - Correct Answer: Used to check tightness
of steering linkage and gearbox.
Raise front wheels off the ground.
Have someone hold on the brakes to eliminate bearing play.
Wiggle the front tires. No more than 1/4 play allowed measured at
the outside of the tire.
9. What do we check motor mounts for? - Correct Answer: Reject if broken.
10. List all items for under hood inspection. - Correct Answer: Hood latch in
good working order. Must be double latched.
Check motor mounts
No fuel leaks
No loose fuel lines
Fuel tanks and lines must be OEM or equal to.
No fuels lines touching hot or moving surfaces.
No fuel system parts inside the car.
Alternate fuel systems (propane) must meet code standards.
Throttle must work properly
No holes or cracks in firewall
No exhaust leaks
No master cylinder leaks
No brake lines, flattened, disconnected, restricted or leaking.
Comprehensive Resource To Help You Ace 2026-2027
Exams Includes Frequently Tested Questions With
ELABORATED 100%
Correct COMPLETE SOLUTIONS
Guaranteed Pass First Attempt!! Current Update
1. What's the minimum steering wheel size? - Correct Answer: 13 inches
2. The horn should be heard at least ________feet away. - Correct Answer:
200 feet
3. What do we look for when checking the brake pedal? - Correct Answer:
Can't go down more than 80% of total travel.
Can't fade when vehicle is stopped. (bleed by in master cylinder)
No excessive friction in linkage.
Can't be missing the rubber pedal pad.
4. What's the min. brake specs for Bonded?_______Riveted?_________ -
Correct Answer: Bonded 2/32 Riveted 1/32
5. What do we check brake hoses for? - Correct Answer: Make sure they
aren't disconnected, don't leak, flattened or
Restricted, dry rot (cord showing)
,6. List the items for interior inspection. - Correct Answer: Steering wheel free
play
Steering gear box
Steering column
Proper size steering wheel
Proper turning
Flexible steering coupler
Indicator lamps for high beam, turn signals.
Horn- must be stock type
Brake pedal travel
Brake pedal fade
Brake pedal linkage
Brake pedal pad
Seats- DRIVERS seat and back must be firmly attached
No springs sticking out of DRIVER'S seat
Seat adjustment must work
Seat belts in good condition ( if originally equipped)
Rear view mirror- no cracks or discoloration
Rear view mirror- must hold adjustment. No junk hanging on it.
7. Describe steering "Lock to Lock" - Correct Answer: Turning the front
wheels as far as they go from one side to the
other. "Stop to Stop"
, 8. Describe the "1/4 inch Play Test" - Correct Answer: Used to check tightness
of steering linkage and gearbox.
Raise front wheels off the ground.
Have someone hold on the brakes to eliminate bearing play.
Wiggle the front tires. No more than 1/4 play allowed measured at
the outside of the tire.
9. What do we check motor mounts for? - Correct Answer: Reject if broken.
10. List all items for under hood inspection. - Correct Answer: Hood latch in
good working order. Must be double latched.
Check motor mounts
No fuel leaks
No loose fuel lines
Fuel tanks and lines must be OEM or equal to.
No fuels lines touching hot or moving surfaces.
No fuel system parts inside the car.
Alternate fuel systems (propane) must meet code standards.
Throttle must work properly
No holes or cracks in firewall
No exhaust leaks
No master cylinder leaks
No brake lines, flattened, disconnected, restricted or leaking.
