2S071 7-LEVEL PRACTICE TEST (QUIZBANK) 565 QUSTIONS AND ANSWERS | 2026 UPDATE
| WITH COMPLETE SOLUTION.
What is the UTC for a superintendent customer support package? (001) - (ANSWER)JFBCS
Describe UTC JFBRC. (001) - (ANSWER)It refers to the Superintendent Repair Cycle Management, who
provides operations support to the combat supply activity at a MOB, FOS, and CSL. Manually or using
the materiel management system or ILS-S, the JFBRC provides the capability to control , process, and
evaluate class IX due-in from maintenance assets. It also inspects and aids in the identification of repair
assets, establishes and manages supply points, manages the AWP program, process TRN actions, and
controls and accounts for repairable deficiency report assets.
What us the purpose of the career broadening program? (002) - (ANSWER)It allows cross-fertilization of
training, knowledge, experience, and perspectives to promote a better understanding of supply chain
management from an enterprise level.
Where are the career broadening assignments located? (002) - (ANSWER)(1) DLA has nine wholesale
positions; three each at the following DSCs: DSCC, OH; DSCR, VA; DSCP, PA
(2) AFMC has nine wholesale positions; three at each of the following ALCs: OC-ALC, Tinker AFB, OK; OO-
ALC, Hill AFB, UT; WR-ALC, Robins AFB, GA.
What changes took place when the AF transformed itseld from a "just-in-case support posture" to one
with "reach back capability"? (003) - (ANSWER)Established a single point of contact for distribution at
wing level, This new concept combined materiel management, transportation, and logistics plans into a
single squadron. It also resulted on the birth of the LRS. The LRS gives the wing commander a single
point of contact that is able to provide order, movement, and availability status of any item in the
distribution chain.
1. (001) Which materiel management unit type code (UTC) identifies the superintendent bare base
support? - (ANSWER)JFBBS.
2. (001) Which unit type code (UTC) provides supply expertise during initial beddown at a main
operating base (MOB), forward operating site (FOS), or cooperative security location (CSL)? -
(ANSWER)JFBFM.
3. (001) Which unit type code (UTC) provides materiel management support to accountable officers,
,2S071 7-LEVEL PRACTICE TEST (QUIZBANK) 565 QUSTIONS AND ANSWERS | 2026 UPDATE
| WITH COMPLETE SOLUTION.
responsible officers, and responsible persons, in the control and accountability of class IX and
class VII at a main operating base (MOB), forward operating site (FOS), or cooperative security
location (CSL)? - (ANSWER)JFBME
4. (002) In order to qualify for assignment under the Materiel Management Enlisted Career
Broadening Program, program nominees must meet all of the following, except
a. have a 2S071 control Air Force Specialty Code (AFSC). - (ANSWER)be recommended by their wing
commander
5. (002) When does the Materiel Management Enlisted Career Broadening Program selection panel
that is chaired by the 2S career field manager (CFM) convene? - (ANSWER)May/June.
6. (002) How many noncommissioned officers (NCO) per year are assigned to each Air Force
Materiel Command (AFMC) Air Logistics Complex (ALC)? - (ANSWER)3
7. (003) Who is the next senior officer under the logistics readiness squadron commander who also
oversees the sophisticated and diverse day-to-day operations within the squadron? -
(ANSWER)Operations officer
8. (003) Which flight is responsible for the centralized command and control, planning, and execution
of all wing deployment operations and the distribution of cargo, passengers, and personal
property? - (ANSWER)Deployment and distribution
9. (003) Which logistics readiness squadron (LRS) flight is the primary liaison between customers
and the Air Force Materiel Command Supply Chain Management-Retail (AFMC SCM-R)?
a. Logistics management. - (ANSWER)Materiel management
10. (004) Which supply class includes the major classification of "subsistence"? - (ANSWER)I
,2S071 7-LEVEL PRACTICE TEST (QUIZBANK) 565 QUSTIONS AND ANSWERS | 2026 UPDATE
| WITH COMPLETE SOLUTION.
11. (004) Which best describes supply class VII items? - (ANSWER)Major end items
12. (004) Which supply class includes all repair parts and components to include kits, assemblies, and
subassemblies? - (ANSWER)VIII
13. (004) Which provides a unique framework that links performance metrics, processes, best
practices, and people into a unified structure? - (ANSWER)Supply chain operations reference
14. (005) Which re-leveling flag is used on a requirements computation inquiry to provide a summary
of information about a given stock number? - (ANSWER)R
15. (006) What is the tool called that gives the ability to track the identity, status, and location of
Department of Defense units, and non-unit cargo (excluding bulk petroleum, oil, and lubricants
[POL]), and passengers; medical patients; and personal property from origin to consignee or
destination across the range of military operations? - (ANSWER)In-transit visibility (ITV)
16. (006) Which system is designed to efficiently collect, process, and transmit transportation data
required to move outbound freight, receive inbound freight, direct in-transit freight, perform
airlift clearance, support contingency requirements and provide command and control oversight
of cargo moving in the Defense Transportation System (DTS)? - (ANSWER)Cargo Movement Operations
System (CMOS)
17. (006) Which Air Mobility Command air transportation system supports fixed, deployed, and
mobile sites? - (ANSWER)Global Air Transportation Execution System (GATES).
18. (006) Which Air Mobility Command force level command and control (C2) system supports
Tanker Airlift Control Center (TACC) execution authority for effective airlift mission
, 2S071 7-LEVEL PRACTICE TEST (QUIZBANK) 565 QUSTIONS AND ANSWERS | 2026 UPDATE
| WITH COMPLETE SOLUTION.
management? - (ANSWER)Global Decision Support System (GDSS).
19. (006) What is the Air Force's source for hazardous data and pollution prevention information? -
(ANSWER)Enterprise Environmental Safety and Occupational Health Management Information System.
20. (006) Which system provides hazardous material managers oversight of orders placed in the
materiel management system to ensure only minimum amounts of material required are ordered
and that material ordered is used only for its authorized purpose? - (ANSWER)Enterprise Environmental
Safety and Occupational Health Management Information
21. (007) Which program in the materiel management system takes control of computer processing
when an error is detected during processing of a transaction? - (ANSWER)Reject.
22. (007) Which supply management listing reflects all accountable rejects and the number of times
reprocessing was attempted for each reject? - (ANSWER)D818
23. (007) Who may force-delete rejects using the reject processor program? - (ANSWER)Reject monitors
24. (007) Which supply management listing shows all rejects that have been cleared? - (ANSWER)D20
25. (008) This difficulty report (DIREP) category code is assigned when a problem stops the computer
from processing input, but does not cause looping nor does it destroy accountable records. - (ANSWER)II
26. (008) A category III difficulty report (DIREP) does not stop processing and is corrected - (ANSWER)in
the next scheduled release
27. (008) Which difficulty report (DIREP) category code is assigned when there are misspelled words
and other minor program deficiencies? - (ANSWER)IV
| WITH COMPLETE SOLUTION.
What is the UTC for a superintendent customer support package? (001) - (ANSWER)JFBCS
Describe UTC JFBRC. (001) - (ANSWER)It refers to the Superintendent Repair Cycle Management, who
provides operations support to the combat supply activity at a MOB, FOS, and CSL. Manually or using
the materiel management system or ILS-S, the JFBRC provides the capability to control , process, and
evaluate class IX due-in from maintenance assets. It also inspects and aids in the identification of repair
assets, establishes and manages supply points, manages the AWP program, process TRN actions, and
controls and accounts for repairable deficiency report assets.
What us the purpose of the career broadening program? (002) - (ANSWER)It allows cross-fertilization of
training, knowledge, experience, and perspectives to promote a better understanding of supply chain
management from an enterprise level.
Where are the career broadening assignments located? (002) - (ANSWER)(1) DLA has nine wholesale
positions; three each at the following DSCs: DSCC, OH; DSCR, VA; DSCP, PA
(2) AFMC has nine wholesale positions; three at each of the following ALCs: OC-ALC, Tinker AFB, OK; OO-
ALC, Hill AFB, UT; WR-ALC, Robins AFB, GA.
What changes took place when the AF transformed itseld from a "just-in-case support posture" to one
with "reach back capability"? (003) - (ANSWER)Established a single point of contact for distribution at
wing level, This new concept combined materiel management, transportation, and logistics plans into a
single squadron. It also resulted on the birth of the LRS. The LRS gives the wing commander a single
point of contact that is able to provide order, movement, and availability status of any item in the
distribution chain.
1. (001) Which materiel management unit type code (UTC) identifies the superintendent bare base
support? - (ANSWER)JFBBS.
2. (001) Which unit type code (UTC) provides supply expertise during initial beddown at a main
operating base (MOB), forward operating site (FOS), or cooperative security location (CSL)? -
(ANSWER)JFBFM.
3. (001) Which unit type code (UTC) provides materiel management support to accountable officers,
,2S071 7-LEVEL PRACTICE TEST (QUIZBANK) 565 QUSTIONS AND ANSWERS | 2026 UPDATE
| WITH COMPLETE SOLUTION.
responsible officers, and responsible persons, in the control and accountability of class IX and
class VII at a main operating base (MOB), forward operating site (FOS), or cooperative security
location (CSL)? - (ANSWER)JFBME
4. (002) In order to qualify for assignment under the Materiel Management Enlisted Career
Broadening Program, program nominees must meet all of the following, except
a. have a 2S071 control Air Force Specialty Code (AFSC). - (ANSWER)be recommended by their wing
commander
5. (002) When does the Materiel Management Enlisted Career Broadening Program selection panel
that is chaired by the 2S career field manager (CFM) convene? - (ANSWER)May/June.
6. (002) How many noncommissioned officers (NCO) per year are assigned to each Air Force
Materiel Command (AFMC) Air Logistics Complex (ALC)? - (ANSWER)3
7. (003) Who is the next senior officer under the logistics readiness squadron commander who also
oversees the sophisticated and diverse day-to-day operations within the squadron? -
(ANSWER)Operations officer
8. (003) Which flight is responsible for the centralized command and control, planning, and execution
of all wing deployment operations and the distribution of cargo, passengers, and personal
property? - (ANSWER)Deployment and distribution
9. (003) Which logistics readiness squadron (LRS) flight is the primary liaison between customers
and the Air Force Materiel Command Supply Chain Management-Retail (AFMC SCM-R)?
a. Logistics management. - (ANSWER)Materiel management
10. (004) Which supply class includes the major classification of "subsistence"? - (ANSWER)I
,2S071 7-LEVEL PRACTICE TEST (QUIZBANK) 565 QUSTIONS AND ANSWERS | 2026 UPDATE
| WITH COMPLETE SOLUTION.
11. (004) Which best describes supply class VII items? - (ANSWER)Major end items
12. (004) Which supply class includes all repair parts and components to include kits, assemblies, and
subassemblies? - (ANSWER)VIII
13. (004) Which provides a unique framework that links performance metrics, processes, best
practices, and people into a unified structure? - (ANSWER)Supply chain operations reference
14. (005) Which re-leveling flag is used on a requirements computation inquiry to provide a summary
of information about a given stock number? - (ANSWER)R
15. (006) What is the tool called that gives the ability to track the identity, status, and location of
Department of Defense units, and non-unit cargo (excluding bulk petroleum, oil, and lubricants
[POL]), and passengers; medical patients; and personal property from origin to consignee or
destination across the range of military operations? - (ANSWER)In-transit visibility (ITV)
16. (006) Which system is designed to efficiently collect, process, and transmit transportation data
required to move outbound freight, receive inbound freight, direct in-transit freight, perform
airlift clearance, support contingency requirements and provide command and control oversight
of cargo moving in the Defense Transportation System (DTS)? - (ANSWER)Cargo Movement Operations
System (CMOS)
17. (006) Which Air Mobility Command air transportation system supports fixed, deployed, and
mobile sites? - (ANSWER)Global Air Transportation Execution System (GATES).
18. (006) Which Air Mobility Command force level command and control (C2) system supports
Tanker Airlift Control Center (TACC) execution authority for effective airlift mission
, 2S071 7-LEVEL PRACTICE TEST (QUIZBANK) 565 QUSTIONS AND ANSWERS | 2026 UPDATE
| WITH COMPLETE SOLUTION.
management? - (ANSWER)Global Decision Support System (GDSS).
19. (006) What is the Air Force's source for hazardous data and pollution prevention information? -
(ANSWER)Enterprise Environmental Safety and Occupational Health Management Information System.
20. (006) Which system provides hazardous material managers oversight of orders placed in the
materiel management system to ensure only minimum amounts of material required are ordered
and that material ordered is used only for its authorized purpose? - (ANSWER)Enterprise Environmental
Safety and Occupational Health Management Information
21. (007) Which program in the materiel management system takes control of computer processing
when an error is detected during processing of a transaction? - (ANSWER)Reject.
22. (007) Which supply management listing reflects all accountable rejects and the number of times
reprocessing was attempted for each reject? - (ANSWER)D818
23. (007) Who may force-delete rejects using the reject processor program? - (ANSWER)Reject monitors
24. (007) Which supply management listing shows all rejects that have been cleared? - (ANSWER)D20
25. (008) This difficulty report (DIREP) category code is assigned when a problem stops the computer
from processing input, but does not cause looping nor does it destroy accountable records. - (ANSWER)II
26. (008) A category III difficulty report (DIREP) does not stop processing and is corrected - (ANSWER)in
the next scheduled release
27. (008) Which difficulty report (DIREP) category code is assigned when there are misspelled words
and other minor program deficiencies? - (ANSWER)IV
