3M 303 Workcenter Supervisor Study Guide Exam 2026 || Most
Recent Exam 2026-2027 Actual Complete Real Exam Questions
And Correct Answers (Verified Answers) Already Graded A+ |
Guaranteed Success!! Newest Exam | Just Released!!
What will performing an Equipment Validation on a newly
replaced piece of equipment ensure? - ANSWER -PMS
Documentation, Technical Manual, and
COSAL
support
What should the maintenance person do after completion
of equipment
validation? - ANSWER -Print their name, sign and date the
validation sheet
Once validation is turned in, what is the Work Center
Supervisors Job? - ANSWER -Review it, update the record in
OMMS, and attach it to the weekly report
Even if no changes are made to an equipment validation sheet
returned by the
Maintenance person, what needs to be done? - ANSWER -
Updated in OMMS-
NG by entering the type of validation and
validation date
, What is IEM Status I for? - ANSWER -Equipment that will
remain on board, be inactive for 7 days or longer and is not
scheduled for corrective maintenance or overhaul
How is the start of IEM indicated on the Quarterly Board? -
ANSWER -A vertical
red with status on the left side of
the line
When equipment is removed from lay up, what is still
required? - ANSWER -
Regularly scheduled maintenance if it is
within periodicity
How often should the Work Center Supervisor create an
external backup of
their workcenter in SKED? - ANSWER -
Weekly Basis
An LGL will have a line item in SKED for what? - ANSWER -
Each piece of
equipment to be
maintained
How often should the LCPO/DIVO perform a
review/approval of Work
Candidates and Configuration Items in OMMS-NG? -
ANSWER -Daily Basis
Recent Exam 2026-2027 Actual Complete Real Exam Questions
And Correct Answers (Verified Answers) Already Graded A+ |
Guaranteed Success!! Newest Exam | Just Released!!
What will performing an Equipment Validation on a newly
replaced piece of equipment ensure? - ANSWER -PMS
Documentation, Technical Manual, and
COSAL
support
What should the maintenance person do after completion
of equipment
validation? - ANSWER -Print their name, sign and date the
validation sheet
Once validation is turned in, what is the Work Center
Supervisors Job? - ANSWER -Review it, update the record in
OMMS, and attach it to the weekly report
Even if no changes are made to an equipment validation sheet
returned by the
Maintenance person, what needs to be done? - ANSWER -
Updated in OMMS-
NG by entering the type of validation and
validation date
, What is IEM Status I for? - ANSWER -Equipment that will
remain on board, be inactive for 7 days or longer and is not
scheduled for corrective maintenance or overhaul
How is the start of IEM indicated on the Quarterly Board? -
ANSWER -A vertical
red with status on the left side of
the line
When equipment is removed from lay up, what is still
required? - ANSWER -
Regularly scheduled maintenance if it is
within periodicity
How often should the Work Center Supervisor create an
external backup of
their workcenter in SKED? - ANSWER -
Weekly Basis
An LGL will have a line item in SKED for what? - ANSWER -
Each piece of
equipment to be
maintained
How often should the LCPO/DIVO perform a
review/approval of Work
Candidates and Configuration Items in OMMS-NG? -
ANSWER -Daily Basis
