1|Page
icc decommissioning (U2) Exam ||Verified Exam!!!||
Most Recent Exam Actual Complete Real Exam
Questions And Correct Answers (Verified Answers)
Already Graded A+ | Guaranteed Success!! | Newest
Exam!!!
A monitoring system certification includes all of the
following EXCEPT
a) submittal of a completed Monitoring System
Certification form
b) pre-notification to the local agency of scheduled
Monitoring System Certification date
c) affixing a tag/sticker to each monitoring equipment
component that is certified, repaired, or replaced
d) posting the Monitoring System Certification from a
visible location at the UST facility - Answer-d) posting the
Monitoring System Certification from a visible location at
the UST facility; CCR 2638
Which of the following is not a valid overfill prevention
method?
a) Spill bucket
b) ATG with audible/visual alarm
,2|Page
c) Ball float valve
d) Flapper valve - Answer-a) Spill bucket; CCR 2635(b)(2)
What is the purpose of interstitial monitoring?
a) to detect leaks in the UDC's
b) to detect the presence of fluid between the primary and
secondary containment
c) to monitor tank volume
d) to regulate fuel flow to the dispenser - Answer-b) to
detect the presence of fluid between the primary and
secondary containment; CCR 2611
If a release has occurred from a single-walled tank, may
the tank be lined?
a) No, not if a release has occurred
b) Yes, if it has been lined before
c) Yes, if the tank owner can demonstrate it will provide
continued containment
d) Yes, if the tank is less than 10,000 gallons - Answer-c)
Yes, if the tank owner can demonstrate it will provide
continued containment; CCR 2660(k), HSC 25296
, 3|Page
A tank may be repaired in the following manner:
a) using a 12" x 12" fiberglass cloth centered on the repair
b) using tank manufacturer approved epoxy or resin
c) with self tapping bolts
d) all of the above - Answer-d) all of the above; CCR 2661
Which of the following is not a confined space?
a) space not designed for continuous employee
occupancy
b) area with limited access
c) area with limited ventilation
d) really deep turbine sump - Answer-c) area with limited
ventilation; CCR Title 8, 5157(b)
Where is a red tag applied?
a) on the turbine head
b) on the fill tube
c) on the dispenser hose
d) on the cash register - Answer-b) on the fill tube; CCR
2717.1(a)
icc decommissioning (U2) Exam ||Verified Exam!!!||
Most Recent Exam Actual Complete Real Exam
Questions And Correct Answers (Verified Answers)
Already Graded A+ | Guaranteed Success!! | Newest
Exam!!!
A monitoring system certification includes all of the
following EXCEPT
a) submittal of a completed Monitoring System
Certification form
b) pre-notification to the local agency of scheduled
Monitoring System Certification date
c) affixing a tag/sticker to each monitoring equipment
component that is certified, repaired, or replaced
d) posting the Monitoring System Certification from a
visible location at the UST facility - Answer-d) posting the
Monitoring System Certification from a visible location at
the UST facility; CCR 2638
Which of the following is not a valid overfill prevention
method?
a) Spill bucket
b) ATG with audible/visual alarm
,2|Page
c) Ball float valve
d) Flapper valve - Answer-a) Spill bucket; CCR 2635(b)(2)
What is the purpose of interstitial monitoring?
a) to detect leaks in the UDC's
b) to detect the presence of fluid between the primary and
secondary containment
c) to monitor tank volume
d) to regulate fuel flow to the dispenser - Answer-b) to
detect the presence of fluid between the primary and
secondary containment; CCR 2611
If a release has occurred from a single-walled tank, may
the tank be lined?
a) No, not if a release has occurred
b) Yes, if it has been lined before
c) Yes, if the tank owner can demonstrate it will provide
continued containment
d) Yes, if the tank is less than 10,000 gallons - Answer-c)
Yes, if the tank owner can demonstrate it will provide
continued containment; CCR 2660(k), HSC 25296
, 3|Page
A tank may be repaired in the following manner:
a) using a 12" x 12" fiberglass cloth centered on the repair
b) using tank manufacturer approved epoxy or resin
c) with self tapping bolts
d) all of the above - Answer-d) all of the above; CCR 2661
Which of the following is not a confined space?
a) space not designed for continuous employee
occupancy
b) area with limited access
c) area with limited ventilation
d) really deep turbine sump - Answer-c) area with limited
ventilation; CCR Title 8, 5157(b)
Where is a red tag applied?
a) on the turbine head
b) on the fill tube
c) on the dispenser hose
d) on the cash register - Answer-b) on the fill tube; CCR
2717.1(a)
