NCCER Electrical Level 1 MODULE 10 Basic
Electrical Construction Documents Exam Questions
and Answers 2026
Adjustable speed drive - CORRECT ANSWER = Power conversion
equipment that provides a means of adjusting the speed of an electric
motor.
Adjustable speed drive system - CORRECT ANSWER = A combination of
an adjustable speed drive, its associated motor(s), and auxiliary
equipment.
Ampacity - CORRECT ANSWER = The maximum current, in amperes,
that a conductor can carry continuously under the conditions of use
without exceeding its temperature rating.
Appliance - CORRECT ANSWER = Utilization equipment, generally other
than industrial, that is normally built in standardized sizes or types and
is installed or connected as a unit to perform one or more functions
such as clothes washing, air-conditioning, food mixing, deep frying etc.
Approved - CORRECT ANSWER = Acceptable to the authority having
jurisdiction.
pg. 1
, 2|Page
Arc-Fault Circuit Interrupter (AFCI) - CORRECT ANSWER = A device
intended to provide protection from the effects of arc faults by
recognizing characteristics unique to arcing and by functioning to de-
energize the circuit when an arc fault is detected.
Askarel - CORRECT ANSWER = A generic term for a group of
nonflammable synthetic chlorinated hydrocarbons used as electrical
insulating media.
Associated Apparatus [as applied to Hazardous (Classified) Locations] -
CORRECT ANSWER = Apparatus in which circuits are not necessarily
interest simply safe themselves but that affects the energy in the
intrinsically safe circuits and is relied on to maintain intrinsic safety.
Such apparatus is one of the following:
(1) electrical apparatus that has an alternative type of protection for use
in the appropriate hazardous parentheses (classified) location
(2) electrical apparatus not so protected that shall not be used within a
hazardous (classified) location
Associated nonicendive feild apparatus [as applied to hazardous
(Classified) locations] - CORRECT ANSWER = Apparatus in which the
circuits are not necessarily nonincendive send of themselves but that
affect the energy in nonincendive field wiring circuits in our relied upon
to maintain non-incentive energy levels. Such apparatuses are one of
the following:
pg. 2