Escrito por estudiantes que aprobaron Inmediatamente disponible después del pago Leer en línea o como PDF ¿Documento equivocado? Cámbialo gratis 4,6 TrustPilot
logo-home
Document preview thumbnail
Vista previa 4 fuera de 73 páginas
Examen

Solution Manual Traffic Engineering 5th Edition Roess & Prassas & McShane

Document preview thumbnail
Vista previa 4 fuera de 73 páginas

Solution Manual Traffic Engineering 5th Edition Roess & Prassas & McShane

Vista previa del contenido

All Chapters Covered




SOLUTIONS

, th
Traffic Engineering, 5 Edition
Roess, R.P., Prassas, E.S., and McShane, W.R.

Solutions to Homework No. 2

Problem 5‐1

A volume of 1,200 veh/h is observed at an intersection approach. Find the peak flow rate
within the hour for the following peak-hour factors: 1.00, 0.90., 0.80, 0.70. Plot and
comment on the results.

The peak flow rate of flow is computed as v = V/PHF. The table below summarizes the
results for the information given. A plot follows.




Even with the same hourly volume,
a small difference in PHF leads to
an enormous difference in peak
flow rates. Traffic engineers must
be able to deal with this peaking
characteristic on a regular basis.




@@
SeSiesim
smiciicsiosloaltaiotinon

,Problem 5‐2

A traffic stream displays average vehicle headways of 2.4s at 55 mph. Compute the
density and rate of flow for this traffic stream.

A headway can be converted to a flow rate as follows:



v = 3600 = 3600 = 1,500 veh/hr/ln
h 2.4

Knowing both flow rate and speed (given), the density may now be computed as:


D = v = 1500 = 27.3 veh/hr/ln
S 55



Problem 5‐3

A freeway detector records occupancy of 0.26 for a 15- minute period. If the detector is
3.5 ft long, and the average vehicle has a length of 18 ft. what is the density implied by
this measurement?

Density is obtained from occupancy as follows:




Such a high value is indicative of highly congested conditions within a queue.

, Problem 5‐4

The following traffic count data were taken from a permanent detector location on a
major state highway. From this data, determine (a) the AADT, (b) the ADT for each
month. (c) the AAWT, and (d) the AWT for each month. From this information, what can
be discerned about the character of the facility and the demand it serves?

The table below illustrates the computation of monthly ADT and AWT values.




The AADT is computed as the total annual volume divided by 365 days, or:


AADT = 2,365,000 = 6,479 veh/day
365

The AAWT is computed as the total weekday volume divided by 260 days, or:

AAWT = 2,067,000 = 7,950 veh/day
260




@@
Se
Sie
sm icic
ism sioslo
altaiotinon

Información del documento

Subido en
28 de febrero de 2026
Número de páginas
73
Escrito en
2025/2026
Tipo
Examen
Contiene
Preguntas y respuestas
$25.99

¿Documento equivocado? Cámbialo gratis Dentro de los 14 días posteriores a la compra y antes de descargarlo, puedes elegir otro documento. Puedes gastar el importe de nuevo.
Escrito por estudiantes que aprobaron
Inmediatamente disponible después del pago
Leer en línea o como PDF

Vendido
0
Seguidores
0
Artículos
72
Última venta
-


Por qué los estudiantes eligen Stuvia

Creado por compañeros estudiantes, verificado por reseñas

Calidad en la que puedes confiar: escrito por estudiantes que aprobaron y evaluado por otros que han usado estos resúmenes.

¿No estás satisfecho? Elige otro documento

¡No te preocupes! Puedes elegir directamente otro documento que se ajuste mejor a lo que buscas.

Paga como quieras, empieza a estudiar al instante

Sin suscripción, sin compromisos. Paga como estés acostumbrado con tarjeta de crédito y descarga tu documento PDF inmediatamente.

Student with book image

“Comprado, descargado y aprobado. Así de fácil puede ser.”

Alisha Student

Preguntas frecuentes