EXAM ELABORATIONS IRC BUILDING CODE
CERTIFICATION EVALUATION EXAMS 2026
COMPLETE QUESTIONS AND ANSWERS
GUARANTEED TO PASS
◉ The purpose of this code is to establish ___ requirements to
safeguard the public safety, health and general welfare. Answer:
Minimum
R101.3 Intent.
◉ Where, in any specific case, different sections of this code specify
different materials, methods of construction or other requirements,
the most ___ shall govern. Answer: Restrictive
R102.1 General.
◉ Where a referenced code or standard includes subject matter that
is within the scope of the IRC, the provisions of the ____ shall take
precedence. Answer: IRC
R102.4.2 Provisions in referenced codes and standards.
,◉ An alternative material or method shall be approved where the
proposed design is ___ and complies with the ____ of the code.
Answer: Satisfactory
Intent
R104.11 Alternative materials, design and methods of construction
and equipment.
◉ A finished or unfinished area, not considered a story, where the
occupiable space is enclosed by the roof assembly above and the
floor-ceiling assembly below is a ____. Answer: Habitable attic
R202 Definitions.
◉ Hot water is water at a temperature greater than or equal to ____ F.
Answer: 110 F
(Review and be familiar with all of the definitions in Chapter 2, it
will help taking the exam)
R202 Definitions (Definition of hot water).
◉ A wall supporting any vertical load in addition to its own weight is
a ____ -____ wall. Answer: Load-bearing
, R202 Definitions.
◉ The wind provisions of the IRC do not apply to the design of
buildings where the basic wind speed equals or exceeds ____ miles
per hour. Answer: 110 mph.
R301.2.1.1 Wind limitations and wind design required.
◉ What is the minimum uniformly distributed live load for habitable
attics and attics served with fixed stairs? Answer: 30 psf.
R301.5 Minimum Uniformly Distributed Live Loads.
◉ Wood structural panels with a minimum thickness of ____ inch and
maximum span of ____ feet shall be permitted for opening protection
in wind-borne debris regions. Answer: 7/16 in.
8
(Limited to one and two-story buildings)
R301.2.1.2
◉ The seismic provisions of the IRC apply to detached one- and two-
family dwellings in Seismic Design Categories ____. Answer: D0, D1
and D2
CERTIFICATION EVALUATION EXAMS 2026
COMPLETE QUESTIONS AND ANSWERS
GUARANTEED TO PASS
◉ The purpose of this code is to establish ___ requirements to
safeguard the public safety, health and general welfare. Answer:
Minimum
R101.3 Intent.
◉ Where, in any specific case, different sections of this code specify
different materials, methods of construction or other requirements,
the most ___ shall govern. Answer: Restrictive
R102.1 General.
◉ Where a referenced code or standard includes subject matter that
is within the scope of the IRC, the provisions of the ____ shall take
precedence. Answer: IRC
R102.4.2 Provisions in referenced codes and standards.
,◉ An alternative material or method shall be approved where the
proposed design is ___ and complies with the ____ of the code.
Answer: Satisfactory
Intent
R104.11 Alternative materials, design and methods of construction
and equipment.
◉ A finished or unfinished area, not considered a story, where the
occupiable space is enclosed by the roof assembly above and the
floor-ceiling assembly below is a ____. Answer: Habitable attic
R202 Definitions.
◉ Hot water is water at a temperature greater than or equal to ____ F.
Answer: 110 F
(Review and be familiar with all of the definitions in Chapter 2, it
will help taking the exam)
R202 Definitions (Definition of hot water).
◉ A wall supporting any vertical load in addition to its own weight is
a ____ -____ wall. Answer: Load-bearing
, R202 Definitions.
◉ The wind provisions of the IRC do not apply to the design of
buildings where the basic wind speed equals or exceeds ____ miles
per hour. Answer: 110 mph.
R301.2.1.1 Wind limitations and wind design required.
◉ What is the minimum uniformly distributed live load for habitable
attics and attics served with fixed stairs? Answer: 30 psf.
R301.5 Minimum Uniformly Distributed Live Loads.
◉ Wood structural panels with a minimum thickness of ____ inch and
maximum span of ____ feet shall be permitted for opening protection
in wind-borne debris regions. Answer: 7/16 in.
8
(Limited to one and two-story buildings)
R301.2.1.2
◉ The seismic provisions of the IRC apply to detached one- and two-
family dwellings in Seismic Design Categories ____. Answer: D0, D1
and D2
