RAMSAY MAINTAINCE EXAM AND
PRACTICE EXAM 2026/2027 WITH ACTUAL
CORRECT QUESTIONS AND VERIFIED
DETAILED ANSWERS |CURRENTLY TESTING
QUESTIONS AND SOLUTIONS|ALREADY
GRADED A+|NEWEST |BRAND NEW
VERSION|JUST RELEASED!!
A pilot flame detector can be a
A. solenoid.
B. flame rod.
C. regulator.
D. pressure gauge.
B. flame rod.
Combustion air is normally preheated by using which one of the following?
A. Recuperator
B. Atomizer
C. Premixer
D. Dampers
C. Premixer
As flow increases across an orifice plate, the differential pressure developed
A. decreases logarithmically.
B. increases linearly.
C. increases as a square function.
D. remains constant.
1|Page
,C. increases as a square function.
All fires require a source of
A. hydrogen.
B. oxygen.
C. nitrogen.
D. heat.
D. heat.
Perfect combustion will take place when the right amount of fuel is combined with what gas?
A. Carbon
B. Oxygen
C. Hydrogen
D. Nitrogen
B. Oxygen
How many BTU's are there in a therm of natural gas?
A. 97,560
B. 100,000
C. 97,560,976
D. 102,500,000
B. 100,000
The quantity of heat necessary to raise one pound of water one degree Fahrenheit is
A. a calorie.
B. a BTU.
C. a therm.
D. Celsius.
B. a BTU.
2|Page
,A synchronous motor controller will start the motor as an induction motor and then
A. bring it into synchronization using DC excitation.
B. run it as a synchronized DC motor.
C. synchronize the stator with the line frequency.
D. synchronize the power factor and frequency.
D. synchronize the power factor and frequency.
A wound-rotor motor is always started with
A. no external resistance in the rotor circuit
B. a starting or auxiliary winding.
C. all the external resistance in the rotor circuit.
D. any external resistances open-circuited.
C. all the external resistance in the rotor circuit.
Dynamic braking is used to
A. regulate the speed of a motor.
B. mechanically slow the motor down.
C. electrically retard or stop a motor.
D. derate a motor's horsepower.
C. electrically retard or stop a motor.
What causes the current to decrease as an induction motor accelerates?
A. Internal resistance
B. External resistance
C. Stator winding
D. Counter EMF
D. Counter EMF
The formula for determining the synchronous speed of the rotating magnetic field around the
stator is
3|Page
, A. N=120fP
B. N=120P:f
C. N=Pf:120
D. N=120f:P
D. N=120f:P
The main contacts of a reversing starter are connected such that two line wires, of the three
feeding the motor, are
A. open when forward contacts close.
B. interchanged when reversed contacts close.
C. shorted for plugging.
D. closed for jogging.
B. interchanged when reversed contacts close.
How many main-line contactor assemblies are used in an across-the-line AC reversing motor
control?
A. One
B. Two
C. Three
D. Four
B. Two
Logic functions are a means of expressing pre-determined operations by the use of
A. mechanical relays.
B. direct transmittal.
C. electrical signals.
D. servomechanisms.
C. electrical signals.
4|Page
PRACTICE EXAM 2026/2027 WITH ACTUAL
CORRECT QUESTIONS AND VERIFIED
DETAILED ANSWERS |CURRENTLY TESTING
QUESTIONS AND SOLUTIONS|ALREADY
GRADED A+|NEWEST |BRAND NEW
VERSION|JUST RELEASED!!
A pilot flame detector can be a
A. solenoid.
B. flame rod.
C. regulator.
D. pressure gauge.
B. flame rod.
Combustion air is normally preheated by using which one of the following?
A. Recuperator
B. Atomizer
C. Premixer
D. Dampers
C. Premixer
As flow increases across an orifice plate, the differential pressure developed
A. decreases logarithmically.
B. increases linearly.
C. increases as a square function.
D. remains constant.
1|Page
,C. increases as a square function.
All fires require a source of
A. hydrogen.
B. oxygen.
C. nitrogen.
D. heat.
D. heat.
Perfect combustion will take place when the right amount of fuel is combined with what gas?
A. Carbon
B. Oxygen
C. Hydrogen
D. Nitrogen
B. Oxygen
How many BTU's are there in a therm of natural gas?
A. 97,560
B. 100,000
C. 97,560,976
D. 102,500,000
B. 100,000
The quantity of heat necessary to raise one pound of water one degree Fahrenheit is
A. a calorie.
B. a BTU.
C. a therm.
D. Celsius.
B. a BTU.
2|Page
,A synchronous motor controller will start the motor as an induction motor and then
A. bring it into synchronization using DC excitation.
B. run it as a synchronized DC motor.
C. synchronize the stator with the line frequency.
D. synchronize the power factor and frequency.
D. synchronize the power factor and frequency.
A wound-rotor motor is always started with
A. no external resistance in the rotor circuit
B. a starting or auxiliary winding.
C. all the external resistance in the rotor circuit.
D. any external resistances open-circuited.
C. all the external resistance in the rotor circuit.
Dynamic braking is used to
A. regulate the speed of a motor.
B. mechanically slow the motor down.
C. electrically retard or stop a motor.
D. derate a motor's horsepower.
C. electrically retard or stop a motor.
What causes the current to decrease as an induction motor accelerates?
A. Internal resistance
B. External resistance
C. Stator winding
D. Counter EMF
D. Counter EMF
The formula for determining the synchronous speed of the rotating magnetic field around the
stator is
3|Page
, A. N=120fP
B. N=120P:f
C. N=Pf:120
D. N=120f:P
D. N=120f:P
The main contacts of a reversing starter are connected such that two line wires, of the three
feeding the motor, are
A. open when forward contacts close.
B. interchanged when reversed contacts close.
C. shorted for plugging.
D. closed for jogging.
B. interchanged when reversed contacts close.
How many main-line contactor assemblies are used in an across-the-line AC reversing motor
control?
A. One
B. Two
C. Three
D. Four
B. Two
Logic functions are a means of expressing pre-determined operations by the use of
A. mechanical relays.
B. direct transmittal.
C. electrical signals.
D. servomechanisms.
C. electrical signals.
4|Page
