IT Essentials (Version 8.0) – ITE 8.0 Final Exam Modules 1-9 (Ch 1 – 9)
In which situation would an ESD strike potentially cause harm to the PC? - (ANSWER)when replacing a
mechanical hard drive with an M.2 SSD
A person has started a new technical job. In which situation would ESD be an issue? - (ANSWER)when
installing a processor
A technician is about to begin preventive maintenance on a company PC. In which situation would ESD
be an issue? - (ANSWER)when installing a processor
when replacing a motherboard
when installing RAM
An instructor has given a student an assignment to assemble a PC. In which situation should the student
be aware that ESD is an issue? - (ANSWER)when installing RAM
What two motherboard components control the system boot operations? (Choose two.) -
(ANSWER)BIOS chip
UEFI chip
A technician is upgrading an ATX motherboard with another ATX motherboard. Which component might
be affected by this and need to be upgraded and bought as an additional purchase? - (ANSWER)CPU
A customer has requested that a PC be built that will support eSATA. Which component should be
checked to be sure that this feature is supported? - (ANSWER)chipset
Which memory module used to hold instructions for booting a PC and loading the OS, but is still used on
adapters even though the memory contents cannot be changed? - (ANSWER)ROM
What is a characteristic of DDR SDRAM? - (ANSWER)It transfers data twice per clock cycle compared to
once per clock cycle for SDRAM.
What are two safety hazards when dealing with laser printers? (Choose two.) - (ANSWER)high voltage
,IT Essentials (Version 8.0) – ITE 8.0 Final Exam Modules 1-9 (Ch 1 – 9)
hot components
Which component requires a technician to install screws externally through the PC case? -
(ANSWER)power supply
A technician is installing an internal HDD. To which motherboard connector will the technician connect
the data cable? - (ANSWER)SATA
Refer to the exhibit. A technician has been asked to install a VIDEO CARD. Which section of the
motherboard will the technician use to install the card? - (ANSWER)section D
When a PC is being assembled, what component is connected to the motherboard with a SATA cable? -
(ANSWER)the optical drive
A technician is troubleshooting a computer that is experiencing hardware failure detected by the BIOS.
What is one way this failure is indicated? - (ANSWER)The computer emits a pattern of beeps indicating
the failing device.
Which three features can be configured in the BIOS settings to secure a computer? (Choose three.) -
(ANSWER)drive encryption
TPM
passwords
What is the purpose of RAID adapters? - (ANSWER)to connect multiple storage devices for redundancy
or speed
When a new motherboard is being installed, between which two components must thermal compound
be applied? (Choose two.) - (ANSWER)CPU
heat sink
, IT Essentials (Version 8.0) – ITE 8.0 Final Exam Modules 1-9 (Ch 1 – 9)
What is the purpose of a Safety Data Sheet? - (ANSWER)to specify procedures for dealing with
potentially hazardous materials
Which negative environmental factor does cleaning the inside of a computer reduce? - (ANSWER)dust
What is a recommended procedure to follow when cleaning computer components? - (ANSWER)Hold
cans of compressed air upright while spraying.
On the production floor, a furniture plant has laptops for process monitoring and reporting. The
production floor environment is around 80 degrees Fahrenheit (27 degrees Celsius). The humidity level
is fairly high around 70 percent. Fans are mounted in the ceiling for air circulation. Wood dust is
prevalent. Which condition is most likely to adversely affect a laptop that is used in this environment? -
(ANSWER)the dust
After a technician tests a theory of probable causes, what two actions should the technician take if the
testing did not identify an exact cause? (Choose two.) - (ANSWER)Establish a new theory of probable
causes.
Document each test tried that did not correct the problem.
What would happen if a PC that contains a power supply that does not automatically adjust for input
voltage is set to 230 volts and attaches to an outlet in the United States? - (ANSWER)The PC would not
turn on.
Which type of network spans a single building or campus and provides services and applications to
people within a common organizational structure? - (ANSWER)LAN
What are two types of wired high-speed Internet connections? (Choose two.) - (ANSWER)DSL, cable
In what two situations would UDP be better than TCP as the preferred transport protocol? (Choose two.)
- (ANSWER)when applications do not need to guarantee delivery of the data
when a faster delivery mechanism is needed
In which situation would an ESD strike potentially cause harm to the PC? - (ANSWER)when replacing a
mechanical hard drive with an M.2 SSD
A person has started a new technical job. In which situation would ESD be an issue? - (ANSWER)when
installing a processor
A technician is about to begin preventive maintenance on a company PC. In which situation would ESD
be an issue? - (ANSWER)when installing a processor
when replacing a motherboard
when installing RAM
An instructor has given a student an assignment to assemble a PC. In which situation should the student
be aware that ESD is an issue? - (ANSWER)when installing RAM
What two motherboard components control the system boot operations? (Choose two.) -
(ANSWER)BIOS chip
UEFI chip
A technician is upgrading an ATX motherboard with another ATX motherboard. Which component might
be affected by this and need to be upgraded and bought as an additional purchase? - (ANSWER)CPU
A customer has requested that a PC be built that will support eSATA. Which component should be
checked to be sure that this feature is supported? - (ANSWER)chipset
Which memory module used to hold instructions for booting a PC and loading the OS, but is still used on
adapters even though the memory contents cannot be changed? - (ANSWER)ROM
What is a characteristic of DDR SDRAM? - (ANSWER)It transfers data twice per clock cycle compared to
once per clock cycle for SDRAM.
What are two safety hazards when dealing with laser printers? (Choose two.) - (ANSWER)high voltage
,IT Essentials (Version 8.0) – ITE 8.0 Final Exam Modules 1-9 (Ch 1 – 9)
hot components
Which component requires a technician to install screws externally through the PC case? -
(ANSWER)power supply
A technician is installing an internal HDD. To which motherboard connector will the technician connect
the data cable? - (ANSWER)SATA
Refer to the exhibit. A technician has been asked to install a VIDEO CARD. Which section of the
motherboard will the technician use to install the card? - (ANSWER)section D
When a PC is being assembled, what component is connected to the motherboard with a SATA cable? -
(ANSWER)the optical drive
A technician is troubleshooting a computer that is experiencing hardware failure detected by the BIOS.
What is one way this failure is indicated? - (ANSWER)The computer emits a pattern of beeps indicating
the failing device.
Which three features can be configured in the BIOS settings to secure a computer? (Choose three.) -
(ANSWER)drive encryption
TPM
passwords
What is the purpose of RAID adapters? - (ANSWER)to connect multiple storage devices for redundancy
or speed
When a new motherboard is being installed, between which two components must thermal compound
be applied? (Choose two.) - (ANSWER)CPU
heat sink
, IT Essentials (Version 8.0) – ITE 8.0 Final Exam Modules 1-9 (Ch 1 – 9)
What is the purpose of a Safety Data Sheet? - (ANSWER)to specify procedures for dealing with
potentially hazardous materials
Which negative environmental factor does cleaning the inside of a computer reduce? - (ANSWER)dust
What is a recommended procedure to follow when cleaning computer components? - (ANSWER)Hold
cans of compressed air upright while spraying.
On the production floor, a furniture plant has laptops for process monitoring and reporting. The
production floor environment is around 80 degrees Fahrenheit (27 degrees Celsius). The humidity level
is fairly high around 70 percent. Fans are mounted in the ceiling for air circulation. Wood dust is
prevalent. Which condition is most likely to adversely affect a laptop that is used in this environment? -
(ANSWER)the dust
After a technician tests a theory of probable causes, what two actions should the technician take if the
testing did not identify an exact cause? (Choose two.) - (ANSWER)Establish a new theory of probable
causes.
Document each test tried that did not correct the problem.
What would happen if a PC that contains a power supply that does not automatically adjust for input
voltage is set to 230 volts and attaches to an outlet in the United States? - (ANSWER)The PC would not
turn on.
Which type of network spans a single building or campus and provides services and applications to
people within a common organizational structure? - (ANSWER)LAN
What are two types of wired high-speed Internet connections? (Choose two.) - (ANSWER)DSL, cable
In what two situations would UDP be better than TCP as the preferred transport protocol? (Choose two.)
- (ANSWER)when applications do not need to guarantee delivery of the data
when a faster delivery mechanism is needed