IMPACT STUDY SYSTEM WITH COMPLETE
VERIFIED ANSWERS 2026
• Purpose of the NEC . Answer: Practical safeguarding of persons and
property from hazards arising from the use of electricity.
• Ampacity of a conductor . Answer: The current a conductor can carry
continuously under the conditions of use without exceeding its
temperature rating.
• Minimum fire-resistant construction rating for a 300kVA dry-type
transformer . Answer: 1-hour
• Fire resistance of walls and roofs of electrical vaults over 600 Volts .
Answer: A minimum fire resistance of 2 hours.
• American Wire Gauge (AWG) principle . Answer: The smaller the
number the larger the wire.
• Recommended voltage drop limit . Answer: Voltage drop be limited to
3 percent on heating and appliance branch-circuits to provide reasonable
efficiency of operation.
, • Conductors installed in manhole installations . Answer: All conductors
installed in manhole installations shall be cabled, or arranged in an
approved manner that provides ready and safe access for persons to enter
for installation and maintenance.
• Circuit conductors between service equipment and final branch-circuit
overcurrent device . Answer: All circuit conductors between the service
equipment, the source of a separately derived system, or other power
supply source and the final branch-circuit overcurrent device are
considered as feeder.
• Definition of ampacity . Answer: The current a conductor can carry
continuously under the conditions of use without exceeding its
temperature rating.
• Minimum fire resistance for electrical vaults . Answer: The walls and
roofs of electrical vaults over 600 Volts shall be constructed of materials
that have adequate structural strength for the conditions, with a
minimum fire resistance of 2 hours.
• Devices not considered as devices . Answer: The loud speaker is NOT
a device.
• Paper insulation for underground service conductors . Answer: As
listed in Table 310.4, paper insulation shall be permitted to be used as
insulation for underground service conductors, or by special permission.