NWSA TTT-2 EXAM 2025 UPDATED QUESTIONS AND ANSWERS A+ GRADE

NWSA TTT-2 EXAM 2025 UPDATED
QUESTIONS AND ANSWERS A+ GRADE


◉Snap hook minimum tensile strength? Answer: 5,000 lbs (22.2 kN)


◉Gate strength requirement for carabiners? Answer: 3,600 lbs


◉Maximum arresting force allowed on worker? Answer: 1,800 lbs


◉Max free fall distance? Answer: 6 feet


◉Max deceleration distance in a fall? Answer: 3.5 feet


◉Minimum clearance from lower level? Answer: At least 3 feet


◉Total fall clearance with 6ft lanyard and 6ft person? Answer: At least
18.5 feet


◉Safety factor for rigging hardware? Answer: 5:1


◉Safety factor for lifting personnel with hoist? Answer: 10:1

, ◉Safety factor for synthetic slings? Answer: 5:1


◉Required removal criteria for rigging hardware? Answer:
Deformation, cracks, illegible markings, excessive wear


◉How often must a competent person inspect fall protection? Answer:
At least every 12 months


◉How often must a user inspect fall protection? Answer: Before each
use


◉Max load angle from sheave or pulley before redirect needed?
Answer: 10


◉Tension multiplier at 30 sling angle? Answer: 2.0x


◉Tension multiplier at 45 sling angle? Answer: 1.41x


◉Minimum safe sling angle for lifting? Answer: 45


◉Effect of decreasing sling angle? Answer: Increases tension