LP GAS TEXAS BOBTAIL UPDATED 2026 EXAM
SCRIPTQUESTIONS AND ANSWERS SCORED A+
✔✔Containers that show excessive denting, bulging, gouging, or corrosion must be
removed from service. True or False? - ✔✔True
✔✔Engine fuel containers of steel must have what in order to minimize corrosion? But
stainless steel cylinders are not required this? - ✔✔Painted or powder-coated
✔✔ASME containers fabricated after January 1, 1984, for use as engine fuel containers
on vehicles must be equipped or fitted with what - ✔✔overfilling prevention device
✔✔Where a overfilling prevention device is installed on the ASME container or exterior
of the compartment and remote filling is used, a what must be installed in the container
fill valve opening - ✔✔Double backflow check valve
✔✔What must be readily accessible on a container without using tools, or other
equipment must be provided to shut off the container - ✔✔main shutoff valves
✔✔Is it True or False that the LP-gas fires must not be extinguished until the source of
the burning has been shut off. - ✔✔True
✔✔Inspection of pressurized hose assemblies must include the following? - ✔✔damage
to outer cover, kinked or flattened hose, soft spots or bulges, couplings missing parts,
leakage
✔✔Hose connections and flexible connecters must be fabricated of material that are
resistant to the action of what? and designed for working pressure of what? - ✔✔LP-gas
both liquid and vapor, 350 psi
✔✔The transfer hose on a LP-gas vehicle fuel dispenser may not be longer than
______ unless it is approved by the authority having jurisdiction. - ✔✔18 feet
✔✔What should be turned off during transfer operations, while connections or
disconnections are made, or while LP-gas is being vented to the atmosphere. -
✔✔sources of ignition
✔✔smoking, open flame, portable electrical tools, and extension lights capable of
igniting LP-gas must be permitted within ________ feet of a point of transfer while filling
operations are in progress - ✔✔25
SCRIPTQUESTIONS AND ANSWERS SCORED A+
✔✔Containers that show excessive denting, bulging, gouging, or corrosion must be
removed from service. True or False? - ✔✔True
✔✔Engine fuel containers of steel must have what in order to minimize corrosion? But
stainless steel cylinders are not required this? - ✔✔Painted or powder-coated
✔✔ASME containers fabricated after January 1, 1984, for use as engine fuel containers
on vehicles must be equipped or fitted with what - ✔✔overfilling prevention device
✔✔Where a overfilling prevention device is installed on the ASME container or exterior
of the compartment and remote filling is used, a what must be installed in the container
fill valve opening - ✔✔Double backflow check valve
✔✔What must be readily accessible on a container without using tools, or other
equipment must be provided to shut off the container - ✔✔main shutoff valves
✔✔Is it True or False that the LP-gas fires must not be extinguished until the source of
the burning has been shut off. - ✔✔True
✔✔Inspection of pressurized hose assemblies must include the following? - ✔✔damage
to outer cover, kinked or flattened hose, soft spots or bulges, couplings missing parts,
leakage
✔✔Hose connections and flexible connecters must be fabricated of material that are
resistant to the action of what? and designed for working pressure of what? - ✔✔LP-gas
both liquid and vapor, 350 psi
✔✔The transfer hose on a LP-gas vehicle fuel dispenser may not be longer than
______ unless it is approved by the authority having jurisdiction. - ✔✔18 feet
✔✔What should be turned off during transfer operations, while connections or
disconnections are made, or while LP-gas is being vented to the atmosphere. -
✔✔sources of ignition
✔✔smoking, open flame, portable electrical tools, and extension lights capable of
igniting LP-gas must be permitted within ________ feet of a point of transfer while filling
operations are in progress - ✔✔25
