AFAB 110 EXAM QUESTIONS AND ANSWERS 2026
EDITION
The word print can best be used the same as the term _____________ -
ANSWER Drawing
In many circumstances, the print is also a vital aspect of a _______________ in
the industrial setting. ANSWER Agreement
The study of print reading is strongly tied to the study of _____________, the
broad term for generating drawings of items in technical domains. - ANSWER
Drafting
PDF is an electronic file format that allows the user to share a drawing or image
without giving them the real CAD data file. PDF stands for
__________________. - ANSWER Portable Document Format
A voluntary guideline that sets the technique of representation for prints, as well
as other engineering practices, is a ________________. - ANSWER Standard
Find the fictional line below. A dotted line in response
The appearance of a(n) ___________ on each end of cutting-plane lines makes
them immediately recognizable. - ANSWER Arrowhead
Determine which line below has to be drawn thick. - ANSWER Cutting-plane
line
The standardized list of line types, perhaps in the form of a chart, is defined in
various texts as the ________________. - ANSWER Alphabet of line
Print reading is the technique of examining a print to gain information. This
assignment comprises two primary elements: visualization and _____________.
- ANSWER Interpretation
How many A-size sheets should be produced if a D-size sheet of paper is cut
, correctly? - ANSWER 8
Which of the following has the lowest probability of appearing on a list of
fundamental parts? Completion of the ANSWER
A block that is necessary to read in the early stage of evaluating a print is the
___________ block, which helps evaluate if the print being seen is up-to-date.
ANSWER Revision History
On a list of basic pieces, which of the following is least likely to be present?
Completion of the ANSWER
The word that basically means "cut in half" is _______________. - ANSWER
Bisect
If a hexagon is inscribed within a circle, the diameter of the circle is equivalent
to the phrase __________. - ANSWER Across-the-corners
The fundamental geometric shapes used to build sophisticated models are called
_______________ in the majority of CAD programs. - ANSWER Primitives
As lines are parallel to each other, arcs are ________________ to each other. -
ANSWER Concentric
Which of the following is a technique to explain the point of tangency between
two circles? - ANSWER Found on a line connecting the two center points
Which of the following cannot be specified by the way a plane crosses a cone? -
ANSWER Ogee curve
Which of the following is not an example of a spatial visualization instrument? -
ANSWER Playing 3D tic-tac-toe
There are three dimension terminology common to drawing education. Out of
the following, which is incorrect? The length of the response
A (n) ________ section is the kind of section view when the cutting-plane line
has bends to accommodate multiple non-aligned features. ANSWER Offset
An odd number of characteristics on a cylindrical item, such holes or pokes on a
bolt circle, might be better expressed by a(n) ___________ section. - ANSWER
Aligned
EDITION
The word print can best be used the same as the term _____________ -
ANSWER Drawing
In many circumstances, the print is also a vital aspect of a _______________ in
the industrial setting. ANSWER Agreement
The study of print reading is strongly tied to the study of _____________, the
broad term for generating drawings of items in technical domains. - ANSWER
Drafting
PDF is an electronic file format that allows the user to share a drawing or image
without giving them the real CAD data file. PDF stands for
__________________. - ANSWER Portable Document Format
A voluntary guideline that sets the technique of representation for prints, as well
as other engineering practices, is a ________________. - ANSWER Standard
Find the fictional line below. A dotted line in response
The appearance of a(n) ___________ on each end of cutting-plane lines makes
them immediately recognizable. - ANSWER Arrowhead
Determine which line below has to be drawn thick. - ANSWER Cutting-plane
line
The standardized list of line types, perhaps in the form of a chart, is defined in
various texts as the ________________. - ANSWER Alphabet of line
Print reading is the technique of examining a print to gain information. This
assignment comprises two primary elements: visualization and _____________.
- ANSWER Interpretation
How many A-size sheets should be produced if a D-size sheet of paper is cut
, correctly? - ANSWER 8
Which of the following has the lowest probability of appearing on a list of
fundamental parts? Completion of the ANSWER
A block that is necessary to read in the early stage of evaluating a print is the
___________ block, which helps evaluate if the print being seen is up-to-date.
ANSWER Revision History
On a list of basic pieces, which of the following is least likely to be present?
Completion of the ANSWER
The word that basically means "cut in half" is _______________. - ANSWER
Bisect
If a hexagon is inscribed within a circle, the diameter of the circle is equivalent
to the phrase __________. - ANSWER Across-the-corners
The fundamental geometric shapes used to build sophisticated models are called
_______________ in the majority of CAD programs. - ANSWER Primitives
As lines are parallel to each other, arcs are ________________ to each other. -
ANSWER Concentric
Which of the following is a technique to explain the point of tangency between
two circles? - ANSWER Found on a line connecting the two center points
Which of the following cannot be specified by the way a plane crosses a cone? -
ANSWER Ogee curve
Which of the following is not an example of a spatial visualization instrument? -
ANSWER Playing 3D tic-tac-toe
There are three dimension terminology common to drawing education. Out of
the following, which is incorrect? The length of the response
A (n) ________ section is the kind of section view when the cutting-plane line
has bends to accommodate multiple non-aligned features. ANSWER Offset
An odd number of characteristics on a cylindrical item, such holes or pokes on a
bolt circle, might be better expressed by a(n) ___________ section. - ANSWER
Aligned
