1|Page
PIPEFITTER NCEER CERTIFICATION EXAM NEWEST 2026 ACTUAL
EXAM WITH COMPLETE QUESTIONS AND CORRECT DETAILED
ANSWERS (100% VERIFIED ANSWERS) |ALREADY GRADED A+|
||PROFESSOR VERIFIED||
A 4-inch lateral riser is to be fabricated for a 6-inch pipe. How
many ordinate lines will
be needed to lay out this cut ?
A) 32
B) 16
C) 8
D) 4 - ANSWER-C
Who is qualified to repair power tools.
A) Journey person
B) Competent Technician
C) Electrician
D) Tool crib attendant - ANSWER-B
Which of the following plastic pipes is NOT joined by solvent
welding ?
,2|Page
A) PVC
B) HDPE
C) CPVC
D) ABS - ANSWER-B
Material placed in the bottom of the trench under the pipe to
provide support is called.
A) Heave
B) Sub trench
C) Trench load
D) Bedding - ANSWER-D
Socket weld joints have a gap between the end of the pipe and
the bottom of the
socket. What is the purpose of this gap ?
A) Makes assembly easier
B) Reduces flexibility at the fitting
C) Prevents weld cracking
D) Provides fit-up adjustment - ANSWER-C
,3|Page
When are rupture discs installed into a pipeline?
A) Before flushing and testing of pipeline
B) After installation of the pipeline
C) Before start-up of the system
D) After start-up of the system - ANSWER-C
Chain come-alongs are PRIMARILY designed for?
A) Lifting in close quarters
B) Vertical lifting
C) Lifting in any location
D) Horizontal lifting - ANSWER-B
Which of the following types of copper tubing has the thickest wall
A) K
B) L
C) M
D) Acr - ANSWER-A
, 4|Page
What is the MINIMUM grade of chain that may be used for rigging
loads overhead?
A) 5
B) 6
C) 7
D) 8 - ANSWER-D
At and above what norminal pipe size is the O.D. of the pipe the
same as the norminal
size of the pipe.
A) 10''
B) 12''
C) 14''
D) 16'' - ANSWER-C
Which type of field sketch has base lines that are 30 degrees to
the horizontal axis?
A) Orthographic
PIPEFITTER NCEER CERTIFICATION EXAM NEWEST 2026 ACTUAL
EXAM WITH COMPLETE QUESTIONS AND CORRECT DETAILED
ANSWERS (100% VERIFIED ANSWERS) |ALREADY GRADED A+|
||PROFESSOR VERIFIED||
A 4-inch lateral riser is to be fabricated for a 6-inch pipe. How
many ordinate lines will
be needed to lay out this cut ?
A) 32
B) 16
C) 8
D) 4 - ANSWER-C
Who is qualified to repair power tools.
A) Journey person
B) Competent Technician
C) Electrician
D) Tool crib attendant - ANSWER-B
Which of the following plastic pipes is NOT joined by solvent
welding ?
,2|Page
A) PVC
B) HDPE
C) CPVC
D) ABS - ANSWER-B
Material placed in the bottom of the trench under the pipe to
provide support is called.
A) Heave
B) Sub trench
C) Trench load
D) Bedding - ANSWER-D
Socket weld joints have a gap between the end of the pipe and
the bottom of the
socket. What is the purpose of this gap ?
A) Makes assembly easier
B) Reduces flexibility at the fitting
C) Prevents weld cracking
D) Provides fit-up adjustment - ANSWER-C
,3|Page
When are rupture discs installed into a pipeline?
A) Before flushing and testing of pipeline
B) After installation of the pipeline
C) Before start-up of the system
D) After start-up of the system - ANSWER-C
Chain come-alongs are PRIMARILY designed for?
A) Lifting in close quarters
B) Vertical lifting
C) Lifting in any location
D) Horizontal lifting - ANSWER-B
Which of the following types of copper tubing has the thickest wall
A) K
B) L
C) M
D) Acr - ANSWER-A
, 4|Page
What is the MINIMUM grade of chain that may be used for rigging
loads overhead?
A) 5
B) 6
C) 7
D) 8 - ANSWER-D
At and above what norminal pipe size is the O.D. of the pipe the
same as the norminal
size of the pipe.
A) 10''
B) 12''
C) 14''
D) 16'' - ANSWER-C
Which type of field sketch has base lines that are 30 degrees to
the horizontal axis?
A) Orthographic
