BECC TEST 2 COMPLETE QUESTIONS AND ANSWERS 100% VERIFIED
1. Who's in charge of maintaining an engi- EOOW when underway, EDO in port.
neering log?
2. How do you mark an out-of-specification Circle it in red, report to work supervisor,
reading? annotate it on the back.
3. What two logs maintained by the engi- Engineering log and bell log
neering department are legal records?
4. How long are LEGAL records maintained 3 years
on board?
5. How long are OPERATING records main- 6 months
tained on board?
6. Which log is a record of all fuels, lubricat- Hourly
ing oils, and freshwater on board?
7. When is the engineering log reviewed by End of every month
the Commanding Officer?
8. How often is a compartment entered to be Every hour
considered a manned compartment?
9. Who has to approve operations of equip- Commanding Oflcer (CO)
ment out-of-parameters?
10. What is the purpose of a locking device? Deterring unauthorized access to equip-
ment.
11. If a piece of equipment has been tam- Commanding Oflcer (CO)
pered with, who has to approve the re-
suming of normal operations?
, BECC TEST 2 COMPLETE QUESTIONS AND ANSWERS 100% VERIFIED
12. Where are all the valves that require lock- EO'S STANDING ORDERS
ing devices listed?
13. Who must be present when opening the Engineer Oflcer
MRG and is responsible for maintaining
the keys to the MRG?
14. What document requires to verify all locks Master Light-Ott checklist(MLOC)
and locking devices prior to getting under-
way?
15. While in-port, who will engineering watch- EDO
standers notify of any discrepancies?
16. What is the purpose of a TSO( Temporary Used when normal operating procedures
Standing Orders)? are unable to be followed
17. What does a status chart show? Current status of system
18. What is contained within the EOP? Safe, technically sound procedures
19. What are immediate actions? Detailed sequential steps necessary to sta-
bilize, gain control, and stop the cascading
ettect of the casualty.
20. What are the four sections of the Immediate, Controlling, Supplementary,
EOCC?(Engineering Operational Casualty Restorative
Control)
21. What two sections of the EOCC need to be Immediate and Controlling
memorized?
22. Warnings
1. Who's in charge of maintaining an engi- EOOW when underway, EDO in port.
neering log?
2. How do you mark an out-of-specification Circle it in red, report to work supervisor,
reading? annotate it on the back.
3. What two logs maintained by the engi- Engineering log and bell log
neering department are legal records?
4. How long are LEGAL records maintained 3 years
on board?
5. How long are OPERATING records main- 6 months
tained on board?
6. Which log is a record of all fuels, lubricat- Hourly
ing oils, and freshwater on board?
7. When is the engineering log reviewed by End of every month
the Commanding Officer?
8. How often is a compartment entered to be Every hour
considered a manned compartment?
9. Who has to approve operations of equip- Commanding Oflcer (CO)
ment out-of-parameters?
10. What is the purpose of a locking device? Deterring unauthorized access to equip-
ment.
11. If a piece of equipment has been tam- Commanding Oflcer (CO)
pered with, who has to approve the re-
suming of normal operations?
, BECC TEST 2 COMPLETE QUESTIONS AND ANSWERS 100% VERIFIED
12. Where are all the valves that require lock- EO'S STANDING ORDERS
ing devices listed?
13. Who must be present when opening the Engineer Oflcer
MRG and is responsible for maintaining
the keys to the MRG?
14. What document requires to verify all locks Master Light-Ott checklist(MLOC)
and locking devices prior to getting under-
way?
15. While in-port, who will engineering watch- EDO
standers notify of any discrepancies?
16. What is the purpose of a TSO( Temporary Used when normal operating procedures
Standing Orders)? are unable to be followed
17. What does a status chart show? Current status of system
18. What is contained within the EOP? Safe, technically sound procedures
19. What are immediate actions? Detailed sequential steps necessary to sta-
bilize, gain control, and stop the cascading
ettect of the casualty.
20. What are the four sections of the Immediate, Controlling, Supplementary,
EOCC?(Engineering Operational Casualty Restorative
Control)
21. What two sections of the EOCC need to be Immediate and Controlling
memorized?
22. Warnings
