OSHA 511 GENERAL INDUSTRY LATEST
FINAL STUDY GUIDE 2026 SOLVED
QUESTIONS FULLY CORRECT
⫸ What's on Section 11C of the OSHA act Answer: Whistle blower
protection - Discrimination against Employees who report violations
⫸ What's the Purpose of OSHA directives, including enforcement and
compliance directives? Answer: • To ensure consistent enforcement of
OSHA regulations
⫸ What is the OSHA multi-employer citation policy? Answer: • The
employer that caused a hazardous condition that violates an OSHA
standard.
• Employers must not create volatile conditions. An employer that does
so is citable even if the only employees exposed are those of other
employers at the site.
⫸ What is the point of operation? Answer: • Is the area on a machine
where cutting, shaping, boring, or forming is accomplished upon the
stock
• where the machine does its work, i.e., where the saw blade cuts into the
wood
⫸ What do you need if you have a fixed ladder over 24 feet? Answer: •
New Fixed Ladders - Each fixed ladder installed on and after November
, 19, 2018, is equipped with a personal fall arrest system or a ladder safety
system
Existing Fixed Ladders -Each fixed ladder installed before November
19, 2018 is equipped with a personal fall arrest system, ladder safety
system, cage, or well.
⫸ Lowest concentration of gas or vapor in air that can be ignited.
Answer: • Minimum concentration of a particular flammable gas or
vapor necessary to support its combustion in air is defined as the Lower
Explosive Limit (LEL)
⫸ What are the Basic Industrial hygiene principles? Steps to Protect
Employees: Answer: • Anticipate potential hazards
• Recognize potential hazards
• Evaluate exposure and risk
• Control exposure and risk
⫸ What is effective exhaust ventilation? Answer: • Dilution ventilation
⫸ What is Equipment grounding conductor? Answer: • Equipment
grounding conductor acts as a safeguard against insulation failure or
faults in the other circuit conductors
- Not an energized conductor under normal conditions.
- Energized if a leak or fault in the normal current path
- Directs current back to the source
FINAL STUDY GUIDE 2026 SOLVED
QUESTIONS FULLY CORRECT
⫸ What's on Section 11C of the OSHA act Answer: Whistle blower
protection - Discrimination against Employees who report violations
⫸ What's the Purpose of OSHA directives, including enforcement and
compliance directives? Answer: • To ensure consistent enforcement of
OSHA regulations
⫸ What is the OSHA multi-employer citation policy? Answer: • The
employer that caused a hazardous condition that violates an OSHA
standard.
• Employers must not create volatile conditions. An employer that does
so is citable even if the only employees exposed are those of other
employers at the site.
⫸ What is the point of operation? Answer: • Is the area on a machine
where cutting, shaping, boring, or forming is accomplished upon the
stock
• where the machine does its work, i.e., where the saw blade cuts into the
wood
⫸ What do you need if you have a fixed ladder over 24 feet? Answer: •
New Fixed Ladders - Each fixed ladder installed on and after November
, 19, 2018, is equipped with a personal fall arrest system or a ladder safety
system
Existing Fixed Ladders -Each fixed ladder installed before November
19, 2018 is equipped with a personal fall arrest system, ladder safety
system, cage, or well.
⫸ Lowest concentration of gas or vapor in air that can be ignited.
Answer: • Minimum concentration of a particular flammable gas or
vapor necessary to support its combustion in air is defined as the Lower
Explosive Limit (LEL)
⫸ What are the Basic Industrial hygiene principles? Steps to Protect
Employees: Answer: • Anticipate potential hazards
• Recognize potential hazards
• Evaluate exposure and risk
• Control exposure and risk
⫸ What is effective exhaust ventilation? Answer: • Dilution ventilation
⫸ What is Equipment grounding conductor? Answer: • Equipment
grounding conductor acts as a safeguard against insulation failure or
faults in the other circuit conductors
- Not an energized conductor under normal conditions.
- Energized if a leak or fault in the normal current path
- Directs current back to the source
