WGU Network and Security -
Foundations - C172 (Network
Commands) Questions And 100%
Verified Answers
\Q\.Traceroute - ANSWERS✔-Used to determine the number of
hops required for a packet to reach its destination.
\Q\.Nslookup - ANSWERS✔-Used to determine IP address of a domain
name.
\Q\.Ping - ANSWERS✔-Used to determine the IP address and latency in
networks.
\Q\.Netstat -a - ANSWERS✔-Used to display IP ports currently open on
the Windows OS.
\Q\.Whois - ANSWERS✔-Information about a webserver including
contact information.
, \Q\.ARP - ANSWERS✔-This command displays the IP to physical (MAC)
address mappings for hosts that have been discovered in the ______
cache. ______ can be used to add, remove, or modify entries in the
______ cache. The hosts need to be on the local network, as these
addresses are discovered by broadcasting to everyone on the network
and noting the reply from the owner; broadcast traffic is not allowed
through a router so that the system will maintain the MAC address of
the router.
\Q\.Nmap - ANSWERS✔-This command scans networks to see what it
can find in terms of hosts and open ports (including well-
known ones for many applications). It is commonly used to determine
what is deployed on a network for
vulnerability analysis, security scans, and related activities.
\Q\.ipconfig - ANSWERS✔-Provides the user with the IP, subnet mask,
and default gateway for each network adapter by default with the /all
option information, such as MAC address, DHCP status, and lease
information. The command with the /release option can be used to
release all connections and renew all adapters. It is primarily used in
Windows.
\Q\.ifconfig - ANSWERS✔-Similar to ipconfig, this command is used to
configure the kernel network interfaces. It is implemented at the time
of booting to configure the necessary interfaces. Once the interfaces
Foundations - C172 (Network
Commands) Questions And 100%
Verified Answers
\Q\.Traceroute - ANSWERS✔-Used to determine the number of
hops required for a packet to reach its destination.
\Q\.Nslookup - ANSWERS✔-Used to determine IP address of a domain
name.
\Q\.Ping - ANSWERS✔-Used to determine the IP address and latency in
networks.
\Q\.Netstat -a - ANSWERS✔-Used to display IP ports currently open on
the Windows OS.
\Q\.Whois - ANSWERS✔-Information about a webserver including
contact information.
, \Q\.ARP - ANSWERS✔-This command displays the IP to physical (MAC)
address mappings for hosts that have been discovered in the ______
cache. ______ can be used to add, remove, or modify entries in the
______ cache. The hosts need to be on the local network, as these
addresses are discovered by broadcasting to everyone on the network
and noting the reply from the owner; broadcast traffic is not allowed
through a router so that the system will maintain the MAC address of
the router.
\Q\.Nmap - ANSWERS✔-This command scans networks to see what it
can find in terms of hosts and open ports (including well-
known ones for many applications). It is commonly used to determine
what is deployed on a network for
vulnerability analysis, security scans, and related activities.
\Q\.ipconfig - ANSWERS✔-Provides the user with the IP, subnet mask,
and default gateway for each network adapter by default with the /all
option information, such as MAC address, DHCP status, and lease
information. The command with the /release option can be used to
release all connections and renew all adapters. It is primarily used in
Windows.
\Q\.ifconfig - ANSWERS✔-Similar to ipconfig, this command is used to
configure the kernel network interfaces. It is implemented at the time
of booting to configure the necessary interfaces. Once the interfaces
