2026 COMPLETE SOLUTION SCRIPT
◉ Standards. Answer: What term is used to describe the documents
written by members, or peers, in the industry.
◉ Industry Standards. Answer: Company's Health, Safety and
Environment policy should be a combination of Labor Regulations
and _________?
◉ Employer. Answer: Where OSHA has not promulgated specific
standards, who is responsible for following the act's general duty
clause?
◉ The whole crew. Answer: On a job site who should be involved in
the JHA process?
◉ Scope of Work. Answer: What does the term SOW stand for?
◉ Job Hazard Assessment. Answer: What does the term SOW stand
for?
, ◉ 3 feet. Answer: When using an extension ladder, how many feet
past the platform must it extend?
◉ 4 feet. Answer: If you have a sixteen-foot ladder leaning against a
building wall, how many feet from the wall does the case need to be
to provide the correct slope?
◉ Personal Protective Equipment. Answer: What do the letters PPE
stand for?
◉ -Senses a short circuit.
-Prevents electrocution.
-Shuts off the flow of electricity. Answer: What does a ground fault
circuit Interrupter (GFCI) do?
◉ Employer. Answer: Who is responsible for providing the
applicable PPE for a work site?
◉ Shoulder level or above. Answer: When using a Y-lanyard attached
to your back d-ring, at what height should the connection to your
anchorage be place? Extend?
◉ Nine inches. Answer: What is the maximum distance between the
sternal d-ring and the fixed safety climb?