USMC CFT Monitor Exam with Complete Question
& Answer
1. The CFT was designed to evaluate which of the following?
A. Endurance, speed, flexibility
B. Strength, coordination, balance
C. Stamina, agility, strength
D. Power, reaction time, balance
✅ Correct Answer: C
Explanation: The Combat Fitness Test evaluates a Marine’s ability to perform tasks that
simulate combat conditions. Stamina measures endurance, agility reflects quick movement and
coordination, and strength assesses physical power. These elements together represent combat
readiness. The CFT complements the PFT by focusing on battlefield functionality.
2. Which equipment is required for administering a CFT?
A. Stopwatch, cones, and whistle
B. Dummy rifle, scale, and cones
C. Calibrated scale, dummy grenades, and measuring tape
D. Ammunition cans only
✅ Correct Answer: C
Explanation: Accurate equipment ensures fairness and standardization during testing. A
calibrated scale ensures ammunition cans meet weight standards. Dummy grenades are required
for the maneuver under fire event, while measuring tape ensures correct distances are used.
3. As a CFT monitor, you must assist in the Risk Management (RM) process.
Which sequence best describes RM steps?
A. Identify hazards, control hazards, accept risk
B. Assess risk, supervise, implement controls
C. Identify hazards, assess hazards, eliminate hazards
D. Identify hazards, assess risks, determine priority, implement controls, supervise
✅ Correct Answer: D
Explanation: Risk Management is a structured process designed to reduce injury and mishaps.
Identifying hazards comes first, followed by assessing their risk level. Controls are then
implemented and supervision ensures those controls remain effective throughout the event.
,4. The CFT monitor is responsible for setting up events, scoring accurately, using
proper equipment, and _____.
A. Coaching participants
B. Enforcing hydration breaks
C. Ensuring participants wear the proper uniform
D. Recording medical data
✅ Correct Answer: C
Explanation: Uniform compliance ensures fairness and safety during the test. Improper
uniforms could provide unfair advantages or increase injury risk. The monitor must verify
uniform standards before each event begins. This responsibility supports test integrity.
5. Which tasks are performed by the CFT monitor during the test?
A. Motivating participants
B. Counting scores only
C. Ensuring proper technique and calling out repetitions
D. Providing medical assistance
✅ Correct Answer: C
Explanation: Proper technique prevents injury and ensures repetitions are valid. Calling out
repetitions helps participants maintain awareness of their progress. The monitor’s role is
observational and administrative, not motivational or medical.
6. What are the minimum location requirements for the movement to contact
event?
A. Flat pavement only
B. Indoor track only
C. Reasonably level terrain with few to no obstacles
D. Sand or gravel surface
✅ Correct Answer: C
Explanation: Safe terrain reduces the likelihood of trips, falls, and injuries. Obstacles could
unfairly affect performance times. Both indoor and outdoor venues are authorized if they meet
safety standards. Consistency is critical for fairness.
7. When may Marines remove uniform blouses during the maneuver to contact
event?
A. At personal discretion
B. When temperature exceeds 85°F
C. During cooldown
D. With commander’s authorization
, ✅ Correct Answer: D
Explanation: Uniform modifications require command approval to maintain consistency and
discipline. Environmental conditions may influence the decision, but authorization is mandatory.
This ensures safety while maintaining uniform standards across all participants.
8. An out-and-back movement to contact route with the same start and finish
requires how many monitors?
A. 1
B. 2
C. 3
D. 4
✅ Correct Answer: C
Explanation: One monitor is required at the start, one at the midpoint, and one at the finish. This
ensures accurate timing and accountability. Proper monitor placement reduces confusion and
prevents route violations.
9. The participant’s goal during the movement to contact event is to:
A. Maintain formation
B. Conserve energy
C. Finish within the time limit
D. Finish as quickly as possible
✅ Correct Answer: D
Explanation: The movement to contact event is timed and scored based on speed. Faster
completion results in higher scores. While safety remains important, maximum effort is expected
to reflect combat urgency.
10. A 28-year-old female Marine completes the movement to contact event in
3:18. What is her score?
A. 85
B. 90
C. 95
D. 100
✅ Correct Answer: C
Explanation: Scoring tables differ by age and gender. A time of 3:18 for a female Marine in this
age group corresponds to 95 points. Accurate timekeeping by monitors is essential for proper
scoring.
11. Which ammunition cans are authorized for the ammunition lift event?
& Answer
1. The CFT was designed to evaluate which of the following?
A. Endurance, speed, flexibility
B. Strength, coordination, balance
C. Stamina, agility, strength
D. Power, reaction time, balance
✅ Correct Answer: C
Explanation: The Combat Fitness Test evaluates a Marine’s ability to perform tasks that
simulate combat conditions. Stamina measures endurance, agility reflects quick movement and
coordination, and strength assesses physical power. These elements together represent combat
readiness. The CFT complements the PFT by focusing on battlefield functionality.
2. Which equipment is required for administering a CFT?
A. Stopwatch, cones, and whistle
B. Dummy rifle, scale, and cones
C. Calibrated scale, dummy grenades, and measuring tape
D. Ammunition cans only
✅ Correct Answer: C
Explanation: Accurate equipment ensures fairness and standardization during testing. A
calibrated scale ensures ammunition cans meet weight standards. Dummy grenades are required
for the maneuver under fire event, while measuring tape ensures correct distances are used.
3. As a CFT monitor, you must assist in the Risk Management (RM) process.
Which sequence best describes RM steps?
A. Identify hazards, control hazards, accept risk
B. Assess risk, supervise, implement controls
C. Identify hazards, assess hazards, eliminate hazards
D. Identify hazards, assess risks, determine priority, implement controls, supervise
✅ Correct Answer: D
Explanation: Risk Management is a structured process designed to reduce injury and mishaps.
Identifying hazards comes first, followed by assessing their risk level. Controls are then
implemented and supervision ensures those controls remain effective throughout the event.
,4. The CFT monitor is responsible for setting up events, scoring accurately, using
proper equipment, and _____.
A. Coaching participants
B. Enforcing hydration breaks
C. Ensuring participants wear the proper uniform
D. Recording medical data
✅ Correct Answer: C
Explanation: Uniform compliance ensures fairness and safety during the test. Improper
uniforms could provide unfair advantages or increase injury risk. The monitor must verify
uniform standards before each event begins. This responsibility supports test integrity.
5. Which tasks are performed by the CFT monitor during the test?
A. Motivating participants
B. Counting scores only
C. Ensuring proper technique and calling out repetitions
D. Providing medical assistance
✅ Correct Answer: C
Explanation: Proper technique prevents injury and ensures repetitions are valid. Calling out
repetitions helps participants maintain awareness of their progress. The monitor’s role is
observational and administrative, not motivational or medical.
6. What are the minimum location requirements for the movement to contact
event?
A. Flat pavement only
B. Indoor track only
C. Reasonably level terrain with few to no obstacles
D. Sand or gravel surface
✅ Correct Answer: C
Explanation: Safe terrain reduces the likelihood of trips, falls, and injuries. Obstacles could
unfairly affect performance times. Both indoor and outdoor venues are authorized if they meet
safety standards. Consistency is critical for fairness.
7. When may Marines remove uniform blouses during the maneuver to contact
event?
A. At personal discretion
B. When temperature exceeds 85°F
C. During cooldown
D. With commander’s authorization
, ✅ Correct Answer: D
Explanation: Uniform modifications require command approval to maintain consistency and
discipline. Environmental conditions may influence the decision, but authorization is mandatory.
This ensures safety while maintaining uniform standards across all participants.
8. An out-and-back movement to contact route with the same start and finish
requires how many monitors?
A. 1
B. 2
C. 3
D. 4
✅ Correct Answer: C
Explanation: One monitor is required at the start, one at the midpoint, and one at the finish. This
ensures accurate timing and accountability. Proper monitor placement reduces confusion and
prevents route violations.
9. The participant’s goal during the movement to contact event is to:
A. Maintain formation
B. Conserve energy
C. Finish within the time limit
D. Finish as quickly as possible
✅ Correct Answer: D
Explanation: The movement to contact event is timed and scored based on speed. Faster
completion results in higher scores. While safety remains important, maximum effort is expected
to reflect combat urgency.
10. A 28-year-old female Marine completes the movement to contact event in
3:18. What is her score?
A. 85
B. 90
C. 95
D. 100
✅ Correct Answer: C
Explanation: Scoring tables differ by age and gender. A time of 3:18 for a female Marine in this
age group corresponds to 95 points. Accurate timekeeping by monitors is essential for proper
scoring.
11. Which ammunition cans are authorized for the ammunition lift event?
