AZ 104 RENEWAL EXAM 2026
COMPREHENSIVE EXAMINATION TEST
COMPLETE QUESTIONS AND ANSWERS
⩥ You need to prepare the environment to meet the authentication
requirements. Which two actions should you perform? Each correct
answer presents part of the solution. NOTE: Each correct selection is
worth one point.
A. Allow inbound TCP port 8080 to the domain controllers in the Miami
office.
B. Add http://autogon.microsoftazuread-sso.com to the intranet zone of
each client computer in the Miami office.
C. Join the client computers in the Miami office to Azure AD.
D. Install the Active Directory Federation Services (AD FS) role on a
domain controller in the Miami Questions & Answers PDF P-16
www.dumpskey.com office.
E. Install Azure AD Connect on a server in the Miami office and enable
Pass-through Authentication. Answer: Answer: BE
,B: You can gradually roll out Seamless SSO to your users. You start by
adding the following Azure AD URL to all or selected users' Intranet
zone settings by using Group Policy in Active Directory:
https://autologon.microsoftazuread-sso.com
E: Seamless SSO works with any method of cloud authentication -
Password Hash Synchronization or Pass-through Authentication, and can
be enabled via Azure AD Connect.
⩥ Scenario: Licensing Issue
1. You attempt to assign a license in Azure to several users and receive
the following error message: "Licenses not assigned. License agreement
failed for one user."
2. You verify that the Azure subscription has the available licenses.
You need to resolve the licensing issue before you attempt to assign the
license again. What should you do?
A. From the Groups blade, invite the user accounts to a new group.
B. From the Profile blade, modify the usage location.
C. From the Directory role blade, modify the directory role.. Answer:
Answer: B
Explanation: Some Microsoft services aren't available in all locations
because of local laws and regulations. Before you can assign a license to
a user, you must specify the Usage location property for the user. You
,can specify the location under the User > Profile > Settings section in
the Azure portal.
⩥ You have an azure subscription named Subscription that contains the
resource groups shown in the following table.
RG1 - East Asia
RG2 - East US
In RG1, you create a virtual machine named VM1 in the East Asia
location. You plan to create a virtual network named VNET1. You need
to create VNET, and then connect VM1 to VNET1. What are two
possible ways to achieve this goal? Each correct answer presents a
complete a solution. NOTE: Each correct selection is worth one point.
A. Create VNET1 in RG2, and then set East Asia as the location.
B. Create VNET1 in a new resource group in the West US location, and
then set West US as the location.
C. Create VNET1 in RG1, and then set East Asia as the location
D. Create VNET1 in RG1, and then set East US as the location.
E. Create VNET1 in RG2, and then set East US as the location.. Answer:
Answer: AC
, A network interface can exist in the same, or different resource group,
than the virtual machine you attach it to, or the virtual network you
connect it to. The virtual machine you attach a network interface to and
the virtual network you connect it to must exist in the same location,
also referred to as a region. Note, Resource groups can span multiple
Regions, but VNets only can hold resources (VMs, Network Adapters)
that exists in the same region. So in this scenario, you need to create
VNET1 in any RG and set location as East Asia.
⩥ You have an Azure subscription that contains a storage account named
account1. You plan to upload the disk files of a virtual machine to
account1 from your on-premises network. The on-premises network uses
a public IP address space of 131.107.1.0/24. You plan to use the disk
files to provision an Azure virtual machine named VM1. VM1 will be
attached to a virtual network named VNet1. VNet1 uses an IP address
space of 192.168.0.0/24. You need to configure account1 to meet the
following requirements: Ensure that you can upload the disk files to
account1. Ensure that you can attach the disks to VM1. Prevent all other
access to account1. Which two actions should you perform? Each
correct selection presents part of the solution. NOTE: Each correct
selection is worth one point.
A. From the Firewalls and virtual networks blade of account1, add the
131.107.1.0/24 IP address range.
B. From the Firewalls and virtual networks. Answer: Answer: AB
COMPREHENSIVE EXAMINATION TEST
COMPLETE QUESTIONS AND ANSWERS
⩥ You need to prepare the environment to meet the authentication
requirements. Which two actions should you perform? Each correct
answer presents part of the solution. NOTE: Each correct selection is
worth one point.
A. Allow inbound TCP port 8080 to the domain controllers in the Miami
office.
B. Add http://autogon.microsoftazuread-sso.com to the intranet zone of
each client computer in the Miami office.
C. Join the client computers in the Miami office to Azure AD.
D. Install the Active Directory Federation Services (AD FS) role on a
domain controller in the Miami Questions & Answers PDF P-16
www.dumpskey.com office.
E. Install Azure AD Connect on a server in the Miami office and enable
Pass-through Authentication. Answer: Answer: BE
,B: You can gradually roll out Seamless SSO to your users. You start by
adding the following Azure AD URL to all or selected users' Intranet
zone settings by using Group Policy in Active Directory:
https://autologon.microsoftazuread-sso.com
E: Seamless SSO works with any method of cloud authentication -
Password Hash Synchronization or Pass-through Authentication, and can
be enabled via Azure AD Connect.
⩥ Scenario: Licensing Issue
1. You attempt to assign a license in Azure to several users and receive
the following error message: "Licenses not assigned. License agreement
failed for one user."
2. You verify that the Azure subscription has the available licenses.
You need to resolve the licensing issue before you attempt to assign the
license again. What should you do?
A. From the Groups blade, invite the user accounts to a new group.
B. From the Profile blade, modify the usage location.
C. From the Directory role blade, modify the directory role.. Answer:
Answer: B
Explanation: Some Microsoft services aren't available in all locations
because of local laws and regulations. Before you can assign a license to
a user, you must specify the Usage location property for the user. You
,can specify the location under the User > Profile > Settings section in
the Azure portal.
⩥ You have an azure subscription named Subscription that contains the
resource groups shown in the following table.
RG1 - East Asia
RG2 - East US
In RG1, you create a virtual machine named VM1 in the East Asia
location. You plan to create a virtual network named VNET1. You need
to create VNET, and then connect VM1 to VNET1. What are two
possible ways to achieve this goal? Each correct answer presents a
complete a solution. NOTE: Each correct selection is worth one point.
A. Create VNET1 in RG2, and then set East Asia as the location.
B. Create VNET1 in a new resource group in the West US location, and
then set West US as the location.
C. Create VNET1 in RG1, and then set East Asia as the location
D. Create VNET1 in RG1, and then set East US as the location.
E. Create VNET1 in RG2, and then set East US as the location.. Answer:
Answer: AC
, A network interface can exist in the same, or different resource group,
than the virtual machine you attach it to, or the virtual network you
connect it to. The virtual machine you attach a network interface to and
the virtual network you connect it to must exist in the same location,
also referred to as a region. Note, Resource groups can span multiple
Regions, but VNets only can hold resources (VMs, Network Adapters)
that exists in the same region. So in this scenario, you need to create
VNET1 in any RG and set location as East Asia.
⩥ You have an Azure subscription that contains a storage account named
account1. You plan to upload the disk files of a virtual machine to
account1 from your on-premises network. The on-premises network uses
a public IP address space of 131.107.1.0/24. You plan to use the disk
files to provision an Azure virtual machine named VM1. VM1 will be
attached to a virtual network named VNet1. VNet1 uses an IP address
space of 192.168.0.0/24. You need to configure account1 to meet the
following requirements: Ensure that you can upload the disk files to
account1. Ensure that you can attach the disks to VM1. Prevent all other
access to account1. Which two actions should you perform? Each
correct selection presents part of the solution. NOTE: Each correct
selection is worth one point.
A. From the Firewalls and virtual networks blade of account1, add the
131.107.1.0/24 IP address range.
B. From the Firewalls and virtual networks. Answer: Answer: AB
