IRONWORKER NCCER EXAM COMPLETE QUESTIONS AND 100%
VERIFIED ANSWERS LATEST VERSION (PASS GUARANTEE)
The area on the wall where a door can be placed is more properly known as the -
(answers)doorway
The purpose of a door closer is to - (answers)control the speed at which the door
opens and closes
How does a door help to control the physical atmosphere of a space - (answers)by
enclosing an area so that the interior may be more effectively heated or cooled
The most common doors installed by ironworkers are _____________. -
(answers)both a and b
The door swing, or handing, is always determined from the _________________. -
(answers)side of the door you used the key on
If the hinges are on the left and door opens in its a - (answers)left hand door
If the hinges are on the right and the door opens out its a - (answers)right hand
reverse door
An exterior sliding door usually has ______________ - (answers)a movable and a
fixed panel
A revolving door consists of three or four doors called ________________. -
(answers)leaves
A _____________ keeps people from spinning a revolving door too fast. -
(answers)governor
Service doors roll upward and are stored ____________. - (answers)on a coil above
, IRONWORKER NCCER EXAM COMPLETE QUESTIONS AND 100%
VERIFIED ANSWERS LATEST VERSION (PASS GUARANTEE)
the opening
Modular reinforced panels used in modern bank vaults are made using a special
blend of ________________. - (answers)concrete and additivies
The first step in installing a modern bank vault is to ________________. -
(answers)become familiar with the manufactures drawings and instructions
Which of the following is a common type of hangar door that ironworkers install? -
(answers)vertical lift
Which of the following is a type of hangar door most likely to be used with smaller
hangars and buildings? - (answers)bi-fold
Which of the following types of hangar doors provides a canopy when the doors is
in the open position - (answers)single panel
Which of the following types of hangar doors is most likely to be used when a large
or even super-wide door is needed? - (answers)rolling
Which of the following types of hangar doors includes intermediate, horizontal
aluminum sections fitted between fabrics? - (answers)vertical lift
Thin vault panels made from new materials available today are far stronger than the
thicker poured concrete walls. True /false - (answers)true
The skills needed to install hangar doors are significantly different from the skills
required to install the swing, sliding and revolving doors. True/false - (answers)false
For ironworkers, the term " layout " includes establishing control lines and
, IRONWORKER NCCER EXAM COMPLETE QUESTIONS AND 100%
VERIFIED ANSWERS LATEST VERSION (PASS GUARANTEE)
benchmarks. True or false - (answers)true
Surveying uses the techniques of ______________. - (answers)geometry and
trigonometry
Historically, distances were measured ____________ - (answers)through the use of
chains with links known as length
The ancient use of a compass to measure horizontal angles has not been improved
upon. True or false - (answers)false
Early surveyors learned that the simplest method to measure height was with an
altimeter. The altimeter they used was basically a ______________. -
(answers)barometer
Theodolites have been used to measure angles since ___________. - (answers)1571
A transit is a type of ______________. - (answers)theodolite
Distance is defined as the amount of _________ between two things -
(answers)space
A horizontal measure is referred to as length or _______ - (answers)width
The term level means having a flat or even surface with no part higher than another.
True/false - (answers)true
Although some drawings refer to sea level, it is usually changed to ____________ -
(answers)an elevation above finished floor
VERIFIED ANSWERS LATEST VERSION (PASS GUARANTEE)
The area on the wall where a door can be placed is more properly known as the -
(answers)doorway
The purpose of a door closer is to - (answers)control the speed at which the door
opens and closes
How does a door help to control the physical atmosphere of a space - (answers)by
enclosing an area so that the interior may be more effectively heated or cooled
The most common doors installed by ironworkers are _____________. -
(answers)both a and b
The door swing, or handing, is always determined from the _________________. -
(answers)side of the door you used the key on
If the hinges are on the left and door opens in its a - (answers)left hand door
If the hinges are on the right and the door opens out its a - (answers)right hand
reverse door
An exterior sliding door usually has ______________ - (answers)a movable and a
fixed panel
A revolving door consists of three or four doors called ________________. -
(answers)leaves
A _____________ keeps people from spinning a revolving door too fast. -
(answers)governor
Service doors roll upward and are stored ____________. - (answers)on a coil above
, IRONWORKER NCCER EXAM COMPLETE QUESTIONS AND 100%
VERIFIED ANSWERS LATEST VERSION (PASS GUARANTEE)
the opening
Modular reinforced panels used in modern bank vaults are made using a special
blend of ________________. - (answers)concrete and additivies
The first step in installing a modern bank vault is to ________________. -
(answers)become familiar with the manufactures drawings and instructions
Which of the following is a common type of hangar door that ironworkers install? -
(answers)vertical lift
Which of the following is a type of hangar door most likely to be used with smaller
hangars and buildings? - (answers)bi-fold
Which of the following types of hangar doors provides a canopy when the doors is
in the open position - (answers)single panel
Which of the following types of hangar doors is most likely to be used when a large
or even super-wide door is needed? - (answers)rolling
Which of the following types of hangar doors includes intermediate, horizontal
aluminum sections fitted between fabrics? - (answers)vertical lift
Thin vault panels made from new materials available today are far stronger than the
thicker poured concrete walls. True /false - (answers)true
The skills needed to install hangar doors are significantly different from the skills
required to install the swing, sliding and revolving doors. True/false - (answers)false
For ironworkers, the term " layout " includes establishing control lines and
, IRONWORKER NCCER EXAM COMPLETE QUESTIONS AND 100%
VERIFIED ANSWERS LATEST VERSION (PASS GUARANTEE)
benchmarks. True or false - (answers)true
Surveying uses the techniques of ______________. - (answers)geometry and
trigonometry
Historically, distances were measured ____________ - (answers)through the use of
chains with links known as length
The ancient use of a compass to measure horizontal angles has not been improved
upon. True or false - (answers)false
Early surveyors learned that the simplest method to measure height was with an
altimeter. The altimeter they used was basically a ______________. -
(answers)barometer
Theodolites have been used to measure angles since ___________. - (answers)1571
A transit is a type of ______________. - (answers)theodolite
Distance is defined as the amount of _________ between two things -
(answers)space
A horizontal measure is referred to as length or _______ - (answers)width
The term level means having a flat or even surface with no part higher than another.
True/false - (answers)true
Although some drawings refer to sea level, it is usually changed to ____________ -
(answers)an elevation above finished floor
