BCIT OIL AND CHEMICAL TANKER
FAMILIARIZATION TRAINING MOCK
TEST EXAM QUESTIONS AND ANSWERS
GRADED A+ 2025/2026
Which pair of devices are fitted on deck to prevent inert gas or cargo vapours from flowing back
into the engine room - ANS Non return valve, the deck seal
On a vapour control system each vessels vapour connection flange must have - ANS Stud, 1"
long projecting from the flange face
Which operation may cause the pressure in an inert tank to fall below the prescribed limits -
ANS Discharging
The terminal indicates to you that they are going to use a booster pump to assist the
discharging operation. You start the discharge, and in a bmfes minutes the pressure drops
sharply. This could be the result of - ANS Booster pump coming on the line and discharging
properly
A distinct feature of an eductor is - ANS Lack of moving parts
Cargoes w/high melting points that may solidify require - ANS Heating
1 @COPYRIGHT 2025/2026 ALLRIGHTS RESERVED.
, Reid vapour pressure is - ANS The lowest temperature and pressure that will cause a
flammable liquid to give of vapours
Routes of entry for toxic substances into the body - ANS Absorbtion, ingestion, inhalation
Pipe used to connect two separate piping systems on a tank vessel is known as a -
ANS Crossover
Antistatic additive would reduce the build-up of charges due to - ANS Loading
Crude oil washing is generally carried out - ANS At discharge port during discharge
Before entering pump room you should - ANS Check for a valid entry permit
Ullages are measured from - ANS An above deck datum
The complete details of a crude oil washing system aboard your vessel will be found in the -
ANS Crude oil washing operations and equipment manual
When loading at dock, which signals must be displayed - ANS Red flag by day, red light by
night
Care should be taken when disconnecting cargo pipes and lines because - ANS Residues may
remain
Dirty ballast water is considered ballast that - ANS Contains oil or an oily mixture
2 @COPYRIGHT 2025/2026 ALLRIGHTS RESERVED.
FAMILIARIZATION TRAINING MOCK
TEST EXAM QUESTIONS AND ANSWERS
GRADED A+ 2025/2026
Which pair of devices are fitted on deck to prevent inert gas or cargo vapours from flowing back
into the engine room - ANS Non return valve, the deck seal
On a vapour control system each vessels vapour connection flange must have - ANS Stud, 1"
long projecting from the flange face
Which operation may cause the pressure in an inert tank to fall below the prescribed limits -
ANS Discharging
The terminal indicates to you that they are going to use a booster pump to assist the
discharging operation. You start the discharge, and in a bmfes minutes the pressure drops
sharply. This could be the result of - ANS Booster pump coming on the line and discharging
properly
A distinct feature of an eductor is - ANS Lack of moving parts
Cargoes w/high melting points that may solidify require - ANS Heating
1 @COPYRIGHT 2025/2026 ALLRIGHTS RESERVED.
, Reid vapour pressure is - ANS The lowest temperature and pressure that will cause a
flammable liquid to give of vapours
Routes of entry for toxic substances into the body - ANS Absorbtion, ingestion, inhalation
Pipe used to connect two separate piping systems on a tank vessel is known as a -
ANS Crossover
Antistatic additive would reduce the build-up of charges due to - ANS Loading
Crude oil washing is generally carried out - ANS At discharge port during discharge
Before entering pump room you should - ANS Check for a valid entry permit
Ullages are measured from - ANS An above deck datum
The complete details of a crude oil washing system aboard your vessel will be found in the -
ANS Crude oil washing operations and equipment manual
When loading at dock, which signals must be displayed - ANS Red flag by day, red light by
night
Care should be taken when disconnecting cargo pipes and lines because - ANS Residues may
remain
Dirty ballast water is considered ballast that - ANS Contains oil or an oily mixture
2 @COPYRIGHT 2025/2026 ALLRIGHTS RESERVED.
