Fundamentals of Surveying Exam
Practice Problems Questions + Verified
Answers 100% correct, Update 2026
How much does an Invar tape expand and contract due to change
in temperature, compared to a standard steel tape under the same
conditions? -
correct answer ✅An Invar tape expands and contracts much less
than a steel tape.
How many pins are in a set of chaining pins? -
correct answer ✅11
What features distinguish an add tape? -
correct answer ✅There is an extra graduated foot beyond the zero
mark.
How long is a Gunter's chain? -
correct answer ✅66 ft
The area of a square one Gunter's chain on a side is most nearly -
correct answer ✅4400 ft^2
,Fundamentals of Surveying Exam
Practice Problems Questions + Verified
Answers 100% correct, Update 2026
Most nearly, what is the area of a rectangle 6 Gunter's chains long
by 5 Gunter's chains wide? -
correct answer ✅3 ac
A distance of 100 ft is measured along a line where the difference in
elevation from Sta. 0+00 to Sta. 10+00 is 11 ft. The measurement is
taken at a temperature of 68°F, with a tape calibrated to be 100.0 ft
in length. Most nearly, what is the corrected measurement? -
correct answer ✅100 ft
A distance of 787.35 ft is measured on level ground with a steel
tape 100 ft in length. The tape was calibrated for 68°F, and the
temperature at the time of the measurement is 98°F. Most nearly,
what is the corrected measurement? -
correct answer ✅787.5 ft
A line is measured on level ground with a 100 ft tape and is found
to be 582.32 ft long. Later, the tape is calibrated and found to be
100.03 ft in length. The temperature at the time of the
measurement was 68°F. Most nearly, what is the corrected length
of the line? -
correct answer ✅582.5 ft
, Fundamentals of Surveying Exam
Practice Problems Questions + Verified
Answers 100% correct, Update 2026
Most nearly, what is the length of a standardized 100 ft steel tape
at 28°F? -
correct answer ✅99.97 ft
A tape that is 100.02 ft long at 68°F is used to measure a line along
sloping ground when the temperature is 28°F. The difference in
elevation from the beginning to the end of the line was 10 ft. The
line is recorded as 196.44 ft. Most nearly, what is the corrected
length of the line? -
correct answer ✅196.7 ft
A 100 ft tape that was tested to be 99.97 ft long is used to measure
a line when the temperature is 98°F. The length of the line is
recorded as 713.19 ft. Most nearly, what is the corrected
measurement? -
correct answer ✅713.1 ft
If an EDM has a standard error of +/-(5 mm + 5 ppm), what would
be the expected error in measuring a 2000 ft line? -
correct answer ✅+/- 0.03 ft
Practice Problems Questions + Verified
Answers 100% correct, Update 2026
How much does an Invar tape expand and contract due to change
in temperature, compared to a standard steel tape under the same
conditions? -
correct answer ✅An Invar tape expands and contracts much less
than a steel tape.
How many pins are in a set of chaining pins? -
correct answer ✅11
What features distinguish an add tape? -
correct answer ✅There is an extra graduated foot beyond the zero
mark.
How long is a Gunter's chain? -
correct answer ✅66 ft
The area of a square one Gunter's chain on a side is most nearly -
correct answer ✅4400 ft^2
,Fundamentals of Surveying Exam
Practice Problems Questions + Verified
Answers 100% correct, Update 2026
Most nearly, what is the area of a rectangle 6 Gunter's chains long
by 5 Gunter's chains wide? -
correct answer ✅3 ac
A distance of 100 ft is measured along a line where the difference in
elevation from Sta. 0+00 to Sta. 10+00 is 11 ft. The measurement is
taken at a temperature of 68°F, with a tape calibrated to be 100.0 ft
in length. Most nearly, what is the corrected measurement? -
correct answer ✅100 ft
A distance of 787.35 ft is measured on level ground with a steel
tape 100 ft in length. The tape was calibrated for 68°F, and the
temperature at the time of the measurement is 98°F. Most nearly,
what is the corrected measurement? -
correct answer ✅787.5 ft
A line is measured on level ground with a 100 ft tape and is found
to be 582.32 ft long. Later, the tape is calibrated and found to be
100.03 ft in length. The temperature at the time of the
measurement was 68°F. Most nearly, what is the corrected length
of the line? -
correct answer ✅582.5 ft
, Fundamentals of Surveying Exam
Practice Problems Questions + Verified
Answers 100% correct, Update 2026
Most nearly, what is the length of a standardized 100 ft steel tape
at 28°F? -
correct answer ✅99.97 ft
A tape that is 100.02 ft long at 68°F is used to measure a line along
sloping ground when the temperature is 28°F. The difference in
elevation from the beginning to the end of the line was 10 ft. The
line is recorded as 196.44 ft. Most nearly, what is the corrected
length of the line? -
correct answer ✅196.7 ft
A 100 ft tape that was tested to be 99.97 ft long is used to measure
a line when the temperature is 98°F. The length of the line is
recorded as 713.19 ft. Most nearly, what is the corrected
measurement? -
correct answer ✅713.1 ft
If an EDM has a standard error of +/-(5 mm + 5 ppm), what would
be the expected error in measuring a 2000 ft line? -
correct answer ✅+/- 0.03 ft
