Ironworker Final Exam With C0rrect
Answers 2026
The area on the wall where a door can be placed is more properly known as the - CORRECT
ANSWER -doorway
the purpose of a door closer is to - CORRECT ANSWER -control the speed at which the door
opens and closes
How does a door help to control the physical atmosphere of a space - CORRECT ANSWER -By
enclosing an area so that the interior may be more effectively heated or cooled
The most common doors installed by Ironworkers are _____________. - CORRECT ANSWER -
Both A and B
The door swing, or handing, is always determined from the _________________. - CORRECT
ANSWER -Side of the door you used the key on
If the hinges are on the left and door opens in its a - CORRECT ANSWER -left hand door
if the hinges are on the right and the door opens out its a - CORRECT ANSWER -right hand
reverse door
An exterior sliding door usually has ______________ - CORRECT ANSWER -a movable and a
fixed panel
A revolving door consists of three or four doors called ________________. - CORRECT ANSWER
-leaves
,A _____________ keeps people from spinning a revolving door too fast. - CORRECT ANSWER -
governor
Service doors roll upward and are stored ____________. - CORRECT ANSWER -on a coil above
the opening
Modular reinforced panels used in modern bank vaults are made using a special blend of
________________. - CORRECT ANSWER -concrete and additivies
The first step in installing a modern bank vault is to ________________. - CORRECT ANSWER -
Become familiar with the manufactures drawings and instructions
Which of the following is a common type of hangar door that Ironworkers install? - CORRECT
ANSWER -Vertical lift
Which of the following is a type of hangar door most likely to be used with smaller hangars and
buildings? - CORRECT ANSWER -Bi-fold
Which of the following types of hangar doors provides a canopy when the doors is in the open
position - CORRECT ANSWER -Single panel
Which of the following types of hangar doors is most likely to be used when a large or even
super-wide door is needed? - CORRECT ANSWER -Rolling
Which of the following types of hangar doors includes intermediate, horizontal aluminum
sections fitted between fabrics? - CORRECT ANSWER -Vertical lift
, Thin vault panels made from new materials available today are far stronger than the thicker
poured concrete walls. True /False - CORRECT ANSWER -True
The skills needed to install hangar doors are significantly different from the skills required to
install the swing, sliding and revolving doors. True/False - CORRECT ANSWER -False
For Ironworkers, the term " layout " includes establishing control lines and benchmarks. TRUE
OR False - CORRECT ANSWER -True
Surveying uses the techniques of ______________. - CORRECT ANSWER -geometry and
trigonometry
Historically, distances were measured ____________ - CORRECT ANSWER -Through the use of
chains with links known as length
The ancient use of a compass to measure horizontal angles has not been improved upon. TRUE
or False - CORRECT ANSWER -False
Early surveyors learned that the simplest method to measure height was with an altimeter. The
altimeter they used was basically a ______________. - CORRECT ANSWER -barometer
Theodolites have been used to measure angles since ___________. - CORRECT ANSWER -1571
A transit is a type of ______________. - CORRECT ANSWER -theodolite
Distance is defined as the amount of _________ between two things - CORRECT ANSWER -space
A horizontal measure is referred to as length or _______ - CORRECT ANSWER -width
Answers 2026
The area on the wall where a door can be placed is more properly known as the - CORRECT
ANSWER -doorway
the purpose of a door closer is to - CORRECT ANSWER -control the speed at which the door
opens and closes
How does a door help to control the physical atmosphere of a space - CORRECT ANSWER -By
enclosing an area so that the interior may be more effectively heated or cooled
The most common doors installed by Ironworkers are _____________. - CORRECT ANSWER -
Both A and B
The door swing, or handing, is always determined from the _________________. - CORRECT
ANSWER -Side of the door you used the key on
If the hinges are on the left and door opens in its a - CORRECT ANSWER -left hand door
if the hinges are on the right and the door opens out its a - CORRECT ANSWER -right hand
reverse door
An exterior sliding door usually has ______________ - CORRECT ANSWER -a movable and a
fixed panel
A revolving door consists of three or four doors called ________________. - CORRECT ANSWER
-leaves
,A _____________ keeps people from spinning a revolving door too fast. - CORRECT ANSWER -
governor
Service doors roll upward and are stored ____________. - CORRECT ANSWER -on a coil above
the opening
Modular reinforced panels used in modern bank vaults are made using a special blend of
________________. - CORRECT ANSWER -concrete and additivies
The first step in installing a modern bank vault is to ________________. - CORRECT ANSWER -
Become familiar with the manufactures drawings and instructions
Which of the following is a common type of hangar door that Ironworkers install? - CORRECT
ANSWER -Vertical lift
Which of the following is a type of hangar door most likely to be used with smaller hangars and
buildings? - CORRECT ANSWER -Bi-fold
Which of the following types of hangar doors provides a canopy when the doors is in the open
position - CORRECT ANSWER -Single panel
Which of the following types of hangar doors is most likely to be used when a large or even
super-wide door is needed? - CORRECT ANSWER -Rolling
Which of the following types of hangar doors includes intermediate, horizontal aluminum
sections fitted between fabrics? - CORRECT ANSWER -Vertical lift
, Thin vault panels made from new materials available today are far stronger than the thicker
poured concrete walls. True /False - CORRECT ANSWER -True
The skills needed to install hangar doors are significantly different from the skills required to
install the swing, sliding and revolving doors. True/False - CORRECT ANSWER -False
For Ironworkers, the term " layout " includes establishing control lines and benchmarks. TRUE
OR False - CORRECT ANSWER -True
Surveying uses the techniques of ______________. - CORRECT ANSWER -geometry and
trigonometry
Historically, distances were measured ____________ - CORRECT ANSWER -Through the use of
chains with links known as length
The ancient use of a compass to measure horizontal angles has not been improved upon. TRUE
or False - CORRECT ANSWER -False
Early surveyors learned that the simplest method to measure height was with an altimeter. The
altimeter they used was basically a ______________. - CORRECT ANSWER -barometer
Theodolites have been used to measure angles since ___________. - CORRECT ANSWER -1571
A transit is a type of ______________. - CORRECT ANSWER -theodolite
Distance is defined as the amount of _________ between two things - CORRECT ANSWER -space
A horizontal measure is referred to as length or _______ - CORRECT ANSWER -width
