TPC 251 SEMICONDUCTORS | QUESTIONS AND
ANSWERS | 100% CORRECT ALREADY GRADED
A+|| PASS!!
TPC 251 Semiconductors p. 9
As the voltage across a forward-biased junction diode increases
beyond the barrier potential, the current... - ANSWERS-increases
rapidly
TPC 251 Semiconductors p. 11
Light shining on a photoconductive cell increases the cells... -
ANSWERS-current-carrying ability
TPC 251 Semiconductors p. 13
Among the environmental problems of semiconductors, ______ is
almost always caused by human contact. - ANSWERS-ESD
(electrostatic discharge)
Raising the temperature of a semiconductor material ______ its ______. -
ANSWERS-increases, conductivity
TPC 251 Semiconductors p. 6
, Boron acts as a(n) ______ when added to silicon, making a(n) ______-type
semiconductor material. - ANSWERS-acceptor, p
TPC 251 Semiconductors p. 7
When a junction diode conducts, electrons move ______ the junction
and holes move ______ the junction. - ANSWERS-toward, toward
TPC 251 Semiconductors p. 21
Most semiconductors can be damaged by an accidentally applied
potential difference as low as ______ Volts. - ANSWERS-100
TPC 251 Semiconductors p. 23
You can neutralize a positively charged nonconductive material by... -
ANSWERS-exposing it to negative ions
TPC 251 Semiconductors p. 24
Soldering irons used with semiconductor devices should be in the
range of ______ Watts. - ANSWERS-25 to 30
ANSWERS | 100% CORRECT ALREADY GRADED
A+|| PASS!!
TPC 251 Semiconductors p. 9
As the voltage across a forward-biased junction diode increases
beyond the barrier potential, the current... - ANSWERS-increases
rapidly
TPC 251 Semiconductors p. 11
Light shining on a photoconductive cell increases the cells... -
ANSWERS-current-carrying ability
TPC 251 Semiconductors p. 13
Among the environmental problems of semiconductors, ______ is
almost always caused by human contact. - ANSWERS-ESD
(electrostatic discharge)
Raising the temperature of a semiconductor material ______ its ______. -
ANSWERS-increases, conductivity
TPC 251 Semiconductors p. 6
, Boron acts as a(n) ______ when added to silicon, making a(n) ______-type
semiconductor material. - ANSWERS-acceptor, p
TPC 251 Semiconductors p. 7
When a junction diode conducts, electrons move ______ the junction
and holes move ______ the junction. - ANSWERS-toward, toward
TPC 251 Semiconductors p. 21
Most semiconductors can be damaged by an accidentally applied
potential difference as low as ______ Volts. - ANSWERS-100
TPC 251 Semiconductors p. 23
You can neutralize a positively charged nonconductive material by... -
ANSWERS-exposing it to negative ions
TPC 251 Semiconductors p. 24
Soldering irons used with semiconductor devices should be in the
range of ______ Watts. - ANSWERS-25 to 30