Cisco CCT Exam | Cisco Certified
Technician Study Guide & Practice Test||
LATEST UPDATE 2026
Which type of fiber cable has higher bandwidth and can be used for longer distances? -
CORRECTANSWER Single-mode
When connecting like devices (switch to switch, router to router, switch to hub, etc.), use
what type of Ethernet cable? -CORRECTANSWER Crossover cable
True or False. TCP/IP networks can use IPv4 and IPv6 address formats independently
or in a dual stack configuration. -CORRECTANSWER True
What is the difference between a broadcast and a multicast? -CORRECTANSWER
Unlike a broadcast transmission, multicast clients must join the multicast group to
receive the information
Which layer of the OSI model establishes and manages sessions between applications?
-CORRECTANSWER Session
What are the two components of a 48-bit Ethernet MAC address? -CORRECTANSWER
OUI (organizational unique identifier)
end station address
, What is the predominant form of transmission on LANs? -CORRECTANSWER unicast
Dividing IPv4 addresses into classes is called: -CORRECTANSWER classful
addressing
A leased line (leased from a carrier) is what type of connection? -CORRECTANSWER
point-to-point
Which device reads the layer 2 MAC address of the destination to forward traffic out of
one specific port? -CORRECTANSWER Switch
Ethernet runs on which layers of the OSI model? -CORRECTANSWER Layer 1 and 2
Which type of connection is dedicated to the subscriber instead of shared bandwidth? -
CORRECTANSWER point-to-point
Routers operate at what layer of the OSI model? -CORRECTANSWER Layer 3 -
Network Layer
Which layer of the OSI model routes data packets and selects the best path to deliver
data? -CORRECTANSWER Network layer
Technician Study Guide & Practice Test||
LATEST UPDATE 2026
Which type of fiber cable has higher bandwidth and can be used for longer distances? -
CORRECTANSWER Single-mode
When connecting like devices (switch to switch, router to router, switch to hub, etc.), use
what type of Ethernet cable? -CORRECTANSWER Crossover cable
True or False. TCP/IP networks can use IPv4 and IPv6 address formats independently
or in a dual stack configuration. -CORRECTANSWER True
What is the difference between a broadcast and a multicast? -CORRECTANSWER
Unlike a broadcast transmission, multicast clients must join the multicast group to
receive the information
Which layer of the OSI model establishes and manages sessions between applications?
-CORRECTANSWER Session
What are the two components of a 48-bit Ethernet MAC address? -CORRECTANSWER
OUI (organizational unique identifier)
end station address
, What is the predominant form of transmission on LANs? -CORRECTANSWER unicast
Dividing IPv4 addresses into classes is called: -CORRECTANSWER classful
addressing
A leased line (leased from a carrier) is what type of connection? -CORRECTANSWER
point-to-point
Which device reads the layer 2 MAC address of the destination to forward traffic out of
one specific port? -CORRECTANSWER Switch
Ethernet runs on which layers of the OSI model? -CORRECTANSWER Layer 1 and 2
Which type of connection is dedicated to the subscriber instead of shared bandwidth? -
CORRECTANSWER point-to-point
Routers operate at what layer of the OSI model? -CORRECTANSWER Layer 3 -
Network Layer
Which layer of the OSI model routes data packets and selects the best path to deliver
data? -CORRECTANSWER Network layer
