Pump ops Exam Questions with Correct Answers 100% Verified by Experts|
2025/2026 Latest Update
Wildland fire apparatus commonly known as brush trucks, brush breakers, or booster
apparatus with pump capacities and tanks of 500 gallons/2000 L.
Wildland Fire apparatus have a pump and roll capability
Certified Mechanic is used for repair work that involves complex tools, parts or in depth
knowledge.
Written or computerized documentation is used for the driver/operator to document the
defective system as per local policy.
The driver/operator notifies their immediate supervisor of the defective system and
documentation.
Maintenance and inspection records of apparatus are important documents that may serve
several functions. In warranty claim these records may be needed to document that required
maintenance was performed. in the event of an accident maintenance records are among those
that will be most scrutinized be investigators. A complete documented hx or recurrent repairs
also assist in deciding whether to purchase a new apparatus as opposed to con to repair an
older vehicle
The incoming driver/operator should consult the person being relieved for any pertinent
information regarding incident activity, equipment usage, or problems
Functional Test get in the cab, start the apparatus and preform a functional test on
apparatus
Functional checks should be preformed outside if weather permits
, Tire types driver/operator should make certain that all tires types match. All tires should be
the same size and weight rating according to appropriate manufacturer specs.
Tire Selection for fire apparatus are based on gross axle weight ratings.
Tire pressure too much or too little tire pressure will damage tires and cause poor road-
handling characteristics, as well as excessive fuel consumption
NFPA 1911 requires all tires be replaced every 7 years
Load Management System an electrical monitoring system that will shed electrical load in a
predetermined order if the chassis voltage begins to drop below predetermined level.
Load Sequencer device that turns lights on at specified intervals, so that the start-up load for
all the devices does not occur at the same time.
Load Monitor device that watches, an electrical system for added loads that may threaten
to overload the system
Load Shedding when an overload occurs, the load monitor will shut down less important
electrical equipment to prevent the overload.
Steering Wheel play should be no more than approx. 10 degree in either direction
Curb Weight is the weight of an of an empty fire apparatus fresh off the assembly line with
no tools, water, equipment, or passengers.
NFPA 1901 and 1911 a side to side variance in weight should not exceed 7%
2025/2026 Latest Update
Wildland fire apparatus commonly known as brush trucks, brush breakers, or booster
apparatus with pump capacities and tanks of 500 gallons/2000 L.
Wildland Fire apparatus have a pump and roll capability
Certified Mechanic is used for repair work that involves complex tools, parts or in depth
knowledge.
Written or computerized documentation is used for the driver/operator to document the
defective system as per local policy.
The driver/operator notifies their immediate supervisor of the defective system and
documentation.
Maintenance and inspection records of apparatus are important documents that may serve
several functions. In warranty claim these records may be needed to document that required
maintenance was performed. in the event of an accident maintenance records are among those
that will be most scrutinized be investigators. A complete documented hx or recurrent repairs
also assist in deciding whether to purchase a new apparatus as opposed to con to repair an
older vehicle
The incoming driver/operator should consult the person being relieved for any pertinent
information regarding incident activity, equipment usage, or problems
Functional Test get in the cab, start the apparatus and preform a functional test on
apparatus
Functional checks should be preformed outside if weather permits
, Tire types driver/operator should make certain that all tires types match. All tires should be
the same size and weight rating according to appropriate manufacturer specs.
Tire Selection for fire apparatus are based on gross axle weight ratings.
Tire pressure too much or too little tire pressure will damage tires and cause poor road-
handling characteristics, as well as excessive fuel consumption
NFPA 1911 requires all tires be replaced every 7 years
Load Management System an electrical monitoring system that will shed electrical load in a
predetermined order if the chassis voltage begins to drop below predetermined level.
Load Sequencer device that turns lights on at specified intervals, so that the start-up load for
all the devices does not occur at the same time.
Load Monitor device that watches, an electrical system for added loads that may threaten
to overload the system
Load Shedding when an overload occurs, the load monitor will shut down less important
electrical equipment to prevent the overload.
Steering Wheel play should be no more than approx. 10 degree in either direction
Curb Weight is the weight of an of an empty fire apparatus fresh off the assembly line with
no tools, water, equipment, or passengers.
NFPA 1901 and 1911 a side to side variance in weight should not exceed 7%
